HP Deskjet 1050: Question of paper food - don't shoot left in the feeder if no printing - all crumpled

Similar Questions

• DeskJet 1050A: HP Deskjet 1050 has won't print black

  I've tried everything I can think of, but it still refuses to print in black.

  I have the official HP (301 XL) ink cartridges that are only a few months, purchased in August 2015 and used only once or twice since their.  Still almost full.

  I tried to clean the heads via the HP Support Assistant at least 5 times.

  I tried to let the printer 'stand' as suggested FAQ, but a week later he managed only a few words scratched before giving up completely new.

  I tried to remove and reinstall the cartridges as shown on http://h30434.www3.hp.com/t5/Inkjet-Printing/Deskjet-1050-J410-will-not-print-black-ink/td-p/4397932 , but that has no effect.

  My color cartridges are still working fine but its always black that falls down.  I had this problem last year too, but assumed it was due to the old ink and bought the new cartridge but its happening already after 5 months.

  Any other suggestiongs?

  Thanks in advance for any advice.

  In the paper here troubleshooting steps can help solve the black does not print on your printer Deskjet 1050 a.

  It soulds like you have done most of them already.  It is possible that the capping system (which protects the print head while this isn't printing) does not work, which allows the print cartridge to dry.  In this case, it can help soak printing cartrdige in hot water.  Take a cup of coffee and put about 1 "of hot (but not boiling) water in it.  Drop the black cartrdige nozzles in the water and let stand for 10 minutes.  After letting it soak the printhead remove and pat dry gently the electrical contacts with a wipe free of fluff dry.  A clean coffee filter works well for this.

• HP Deskjet 1050: HP Deskjet 1050 print, scan, copy error

  Bula sir / maam,.

  It comes from Fiji,

  We used the HP Deskjet 1050 since 2010 until yesterday (25/11/2015), now (26/11/2015) is not printing, copying or scanning.

  Yesterday, I cleaned the bottom of the prnter (printer side), then all of the ink came out almost everywhere. Cleaned, changed (new) the two cylinders and it worked well.

  This morning all the printer lights are flashing (low in ink & so the witness of the paper). Could ' t print, photocopy or scan anything. When I opened the front of the printer check ink, the slotter of ink is not to stop in the Middle than usuall.

  When you try to SNA off-line the following note appears.

  

  Kindly need your advice on what I can do to solve this problem.

  Vinaka...

  Hi @Sevanaia in Fiji! I'd love to help you with your Deskjet 1050.

  Looks like you have had to face some problems all at once. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

• If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Thanks, I look forward to hearing back on your part.

• Could not locate the downloaded icc paper profiles from Ilford.and installed on the computer.

  Hello. Have a Canon s PRO-100 printer. I would like to use Ilford Galarie Pearl paper if I can. Downloaded icc profile at the site of Ilford and installed according to the instructions provided. Have a Yosemite iMac running. Have Lightroom and Photoshop installed CC. Installed the HD/Library/Color/sync/Profiles and Lightroom profile restarted. Cannot find the profile in the print dialog box or the Pro printing Studio. Plugin. Used utiliy ColorSync and it is said that the desc keyword is incorrect, what it is. Anyone else had problems with Ilford this printer icc profiles? Any advice would be very welcome.

  Sorry for the delay! Palouse thanks for your response. I think the problem is the profiles of Ilford. Their PRO-100 s profiles are not where it should be, but PRO-100 profiles do. On their icc profile web page, they list the 100 s using pigment inks! No dye based. Their profile icc PRO-100 page gets the right ink. This is probably why they don't show up where they shouldn't. Even of Canon own profiles for various paper manufacturers don't list profiles for the 100 s. side in Ilford, and they are wrong. ! I'll use the PRO-100 profiles, as suggested by ebiggs1. Thank you everyone for you answers.

• DeskJet 1050 don't connect and print

  My deskjet 1050 has stopped working on my desktop windows 8.1. It worked yesterday and is a recent purchase. There is no error message. the image of the printer is checked green in devices and it seems that nothing is wrong. When I click on the status, the word 'connect' is grayed out. I have tried disconnecting the power supply, disconnect from the computer, uninstall and reinstall the software, turning computer and new. There is no blinking light, the Green led is on, cartridges are full, usb ports and power outlets are very good. He printed the alignment page when I reinstalled it and it scans and copies. Just could not get the printer to connect to my computer. When I asked the hp detector to detect the device it gave me a message saying something about not being compatible with a tablet. I'm on a desktop, not a Tablet so don't know why it came; I'm totally frustrated because I can't find anything on the support network to help me. would appreciate some advice. :-) Tracy

  Hi mumof3,

  Welcome to the Forums of HP Support! I understand that you are not able to print on your USB connected HP Deskjet 1050, you are running Windows 8.1 and tried a few troubleshooting without success.

  I would like that you start here and run HP print and Scan Doctor- it has been designed to provide users troubleshooting by HP and features fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know what the PSDR find, I'll watch for your reply.

  Thank you

• Print Preview does not I can't print unless I've done (ctrl shift p) on Deskjet 1050 J410

  HP Deskjet 1050 J410

  Windows XP

  Press on print, print page preview comes but does not preview, so I cannot print unless I've done (ctrl shift p).  At the bottom of the print options on the left side in blue print is this: print using the dialog system (ctrl + shift + p)

  He worked last week and no changes have been made to my computer.

  Becky

  There is a possiblity that it's Google Chrome that has the problem.  Try to print from IE or Firefox and see what happens.

• hp deskjet 1050 printer, no paper feeding. not find a jam

  I have a HP 1050 printer/scanner/copier.

  I have not made any changes to it and do not see an error message, but when I try to print, it seems that the book seeks to pass through and it will remain partially but then stops.  Watched is stuck, I don't see anything. The scanner works fine so I know that the connection is ok.

  Any ideas would be greatly appreciated!

  Thank you

  New pb1031 Hi

  Thanks for the reply back with the operating system.

  This article will get you detail the steps on how to approach the troubleshooting of this problem;

  http://support.HP.com/us-en/document/c02061020

  Also after the steps in the article, let's run this utility HP print and scan the doctor, download and run this tool of diagnoses and solves many printing, scanning and connectivity issues.

  Updated with all the mistakes that the tool can be found or if you still need help so that I will try my best to help you.

  I hope this helps!

  RobertoR

  ▼

• HP Deskjet 1050 A J410g he has 2 problems [edited]

  Stampante HP Deskjet 1050 has presented 2 problems, scan doctor de mi J410g: sulla stampa, DRYVER CONFLITTO - sullo, COMPONENTE TWAIN scanner. COSI non riesco a stampare. Sono is col programma di individualization automatica del prodotto. Ho ordered UN nuovo CD di all'istallazione del prodotto, bassist of quello che ho non mi muffa aggiornato my non e ancora protection. COSA posso fare? NO sound a great chatroom. SAXEMARD

   
   

  HP Deskjet 1050 A J410g he has 2 problems, scan doctor said to me in the press, DRYVER CONFLICT on the scanner, COMPONENT of TWAIN. So I can't stampare. Sound system connected with the program to recognize automatically of the product. HO has ordered a new CD of installation of the product, because I did not feel up to date but is still not happy. What can I do? NOT a great chatroom. SAXEMARD

  Hi @giampa1146 ,

  Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information such as your email address in the subject box of your message. Our Participation rules:

  Protect privacy - yours and others. Do not share something about yourself that you do not want to see on a billboard on the road. Do not post contact or other personal information - your own or someone of another--or of any content that you receive in communications one without the consent of the author. For example, do not post your n ° of series or publicly coordinated computer and not let someone you don't know to take control of your computer remotely.

  If you need people to contact you directly, or ask them to send you a private message, or subscribe to the discussion then you will be notified when there are replies. You can also click on your name anywhere in the forum and will take you to your profile page, where you can find a list of threads, that you participated.

  Sharing personal addresses, telephone numbers and family names not suitable for your safety. If you have any questions, feel free to send me a private message in response.

  Thank you

  George

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• DeskJet 1050 in europe - compatibility of ink with us

  Hi, having recently moved back to the United States of Europe I had to realize that my HP printers (from the Germany and United Kingdom) do not accept ink cartridges HP United States-have sold. Althouth I chose the correct cartridge for HP deskjet 1050 j410a type, the printer LED were continues to flash red. A brief search on the internet showed that HP just en-coded all printers so that you virtue use cartridges of the country have purchased printers.

  However, it seams to be the way to change the code of the printer so that it sells US HP cartridges will accept. Can anyone help? I have a HP Deskjet 1050 entry level and a high C8081 of range and I don't want to lose them either.

  Any help will be appreciated.

  I may be able to help, I'll send you a private message asking some details.

  For others with the same question, you will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Not all agents are trained in this procedure, if you talk to the agent is not able to perform the procedure ask to speak to a supervisor and then ask 'regionalization Reset. "   Webpage of HP on the subject is here.

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• installer of hp deskjet 1050 for mac 10.10.2

  I have a mac book pro with me.

  OS X yosemite

  10.10.2 version

  I want to connect to my printer.

  Please give me the Installer HP DESKJET 1050 for mac 10.10.2

  Hello.

  Turn on the printer and connect it to your Mac, then download and install the latest version of the software below:

  http://FTP.HP.com/pub/softlib/software12/COL44656/Al-108392-3/HP_Mountain_Lion_Ink_SW_v12.23.17.dmg

  Don't forget to check the HP scan during installation to get full functionality.

  Kind regards

  Shlomi

• Deskjet 1050 printer, model j4: deskjet j410a 1950

  A printer Deskjet 1050, model j410a, works with a black cartridge or must be a color cartridge as well.  If it requires an as well color ink cartridge, it can it be empty?

  Welcome to the community of HP @HC44,

  I wanted to tender hand to help you with your question about your Deskjet 1050 impression with a cartridge installed. I checked the User Guide and I found below for information on the use of "mode of single cartridge". This should work for you!

  Page 31 user manual

  

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I've helped to achieve a settlement.

  I hope this helps to answer your question, if you have any other questions, do not hesitate to ask!

• DeskJet 1050: Deskjet 1050 slow printing

  Given that I have installed the printer software 1050 10 windows did not have the following problems: when I print a document feeds the paper, the printer then does nothing for a while, then part of prints, prints, stalls, stalls... the document is finished. If I photocopy a document it takes forever to print with it's stop start the effect. Any ideas? Dave

  Hi @Neptuno,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a printer all-in-one HP Deskjet 1050 with a Windows 10 PC and the printer takes a long time to print or even copy. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  Here is the document of support designed to be used with this type of problem - slow printing.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!