HP Deskjet 1050 A J410g he has 2 problems [edited]

Similar Questions

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• DeskJet 1050A: HP Deskjet 1050 has won't print black

  I've tried everything I can think of, but it still refuses to print in black.

  I have the official HP (301 XL) ink cartridges that are only a few months, purchased in August 2015 and used only once or twice since their.  Still almost full.

  I tried to clean the heads via the HP Support Assistant at least 5 times.

  I tried to let the printer 'stand' as suggested FAQ, but a week later he managed only a few words scratched before giving up completely new.

  I tried to remove and reinstall the cartridges as shown on http://h30434.www3.hp.com/t5/Inkjet-Printing/Deskjet-1050-J410-will-not-print-black-ink/td-p/4397932 , but that has no effect.

  My color cartridges are still working fine but its always black that falls down.  I had this problem last year too, but assumed it was due to the old ink and bought the new cartridge but its happening already after 5 months.

  Any other suggestiongs?

  Thanks in advance for any advice.

  In the paper here troubleshooting steps can help solve the black does not print on your printer Deskjet 1050 a.

  It soulds like you have done most of them already.  It is possible that the capping system (which protects the print head while this isn't printing) does not work, which allows the print cartridge to dry.  In this case, it can help soak printing cartrdige in hot water.  Take a cup of coffee and put about 1 "of hot (but not boiling) water in it.  Drop the black cartrdige nozzles in the water and let stand for 10 minutes.  After letting it soak the printhead remove and pat dry gently the electrical contacts with a wipe free of fluff dry.  A clean coffee filter works well for this.

• My laptop can not find my Deskjet 1050 has to scan a document, help!

  Hello

  My printer (HP Deskjet 1050 A) does not connect to my computer samsung laptop.

  IM using windows 7.

  I open the HP Printer Wizard and go to the tab at the top saying 'Print & Scan '.

  I then clicked on "Scan a document or photo" and my laptop comes with the message "The HP Deskjet 1050 J410 series was not found"

  The printer is connected to the electric network and is connected to my lapop via USB. I tried to print a document to check the connection and it prints well, I also scanned and printed using the printer functions and which also works fine.

  Help, please!

  Thank you very much in advance for your help and advice!

  Welcome to the forums of Lorna!

  I understand that you are unable to scan from your Deskjet 1050a however, you can print successfully. If the full version of the software is not installed, the scan function will not work.

  First of all, please running the full installation: software HP Deskjet full functionality and drivers

  You can also try to run the HP print and Scan Doctor to see if it will fix the problem of scanning. If there is a problem more serious that the tool cannot fix, it will warn you. Please let me know the results!

  Let me know how it works for you!

  Happy Friday

• DeskJet 1050 has

  Hello

  I have been using this printer with my Mac running the Mavericks without problem.  Then suddenly, I get a message saying that the printer is offline and print queue is paused.  I try ignition and extinction of the printer, but its status does not change.  I search online and try to reset all settings to print on my Mac, no help.  I then uninstall the software and download the latest version of the driver for HP but the problem is now that the Mac does not even recognize that the printer is connected, so I'm not able to fully complete to the top of the new driver or add a printer through system preferences.

  Thanks for any help

  Raafox

  Hello @raafox,

  Welcome to the HP Forums!

  I understand that your Deskjet 1050 A is not recognized on your computer. I will do my best to help you! I would recommend to fix permissions of the drive on your computer by following this document here. Make sure that your Apple updates are made by following this document Apple here.

  Please follow this entire document of HP print jobs are stuck in the print queue. The reason why I suggest this step is because you said in your post that the print queue is paused and now your USB is detected. Have you tried another USB cord to see if that makes a difference?

  Also, follow this document Apple on USB: Troubleshooting Error Messages. You can try to reset the print on your computer system by following this document Apple here.

  Please post your results, I will be looking forward to hear from your part have a good night!

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• HP Deskjet 1050 suddenly won't let me not crop the borders

  Hello

  I got this Deskjet 1050 for a long time and it has always worked without problem. Suddenly, it won't let me adjust the borders on the pictures. I try to crop and save some pictures of my high school Yearbook. I did several times in the past with no problems whatsoever. Of course, with a directory, you should never close the lid down, but it remains always cropped photos directory in the past, so why suddenly prohibited?

  Instead of the usual line right with arrows at both ends, when you move the border, I am a smaller image "squareish" who will not let me enter the border and drag. BUT, if I just put a single photo or a junk mail envelope in and the scanner, I can crop very well. The only difference is that the lid is closed completely.

  If this quirk would be normal by its design, I would say very well, but why all of a sudden after all these years?

  I would appreciate it so any ideas you useful people.

  You care.

  Mike

  Hi dwarf, please provide the screenshots.

  I had tried the scan on a printer of laboratory with a single document, and the other with the lid open and was able to crop the picture in both directions. So I do not know why your software is not allowing the harvest. It shouldn't make a difference if you scan a single page or a brochure for the scanning software allows you to crop the image. It might be software related. Try the different settings of the software to see if that makes a difference.

  When you scan the document, you are by clicking on the icon of the culture and appropriate on the right of small black squares, to crop the image?

  Try changing the size of scanning and scan an entire Document to see if it makes a are of different size, a difference.

  You can always scan the photo, save it and then open it in Paint under all programs, crop and save the image there as a work-around.

  Thank you.

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• DeskJet 1050 J410: Deskjet 1050 J410 used to scan using Windows 10

  My all-in-one Deskjet 1050 J410 worked well on Windows 7.

  Yesterday, that I upgraded my Windows 10 laptop.

  The printer asked downloading new driver s/w, what I've done.  It prints very well now.  But it will not scan.

  I can access the printer assistant screen in my taskbar.

  All options under the 'Print' button works fine.

  But when I press the "Scan" button, I get the message

  "The HP Deskjet 1050 J410 series was not found".

  I ran a few HP diagnostic s/w, which moved the scanner (I could hear it), and indicated that no problems were found.

  But still I can't access the scanner!

  Any ideas what to try next?

  I finally solved the problem, "common solutions for Windows 10' using HP Web site to

  http://support.HP.com/us-en/document/c04773236/

  This has had a link to 'HP printers - printer problems after upgrade to Windows 10'

  http://support.HP.com/us-en/document/c05212298

  Uninstall the old drivers of the printer completely.

  Restart the computer.

  Install new s/w and drivers.

  Restart the computer and the printer.

  Now, everything's fine.  It took some time to find the solution, but he was there if you knew the right search terms!

  After having done that, the link to the scanner on the taskbar disappeared.

  It took some other research, to learn how to get the icon on the taskbar.

  I finally arrived.

  S/W upgrades are rarely painless!

• DeskJet 1050 don't connect and print

  My deskjet 1050 has stopped working on my desktop windows 8.1. It worked yesterday and is a recent purchase. There is no error message. the image of the printer is checked green in devices and it seems that nothing is wrong. When I click on the status, the word 'connect' is grayed out. I have tried disconnecting the power supply, disconnect from the computer, uninstall and reinstall the software, turning computer and new. There is no blinking light, the Green led is on, cartridges are full, usb ports and power outlets are very good. He printed the alignment page when I reinstalled it and it scans and copies. Just could not get the printer to connect to my computer. When I asked the hp detector to detect the device it gave me a message saying something about not being compatible with a tablet. I'm on a desktop, not a Tablet so don't know why it came; I'm totally frustrated because I can't find anything on the support network to help me. would appreciate some advice. :-) Tracy

  Hi mumof3,

  Welcome to the Forums of HP Support! I understand that you are not able to print on your USB connected HP Deskjet 1050, you are running Windows 8.1 and tried a few troubleshooting without success.

  I would like that you start here and run HP print and Scan Doctor- it has been designed to provide users troubleshooting by HP and features fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know what the PSDR find, I'll watch for your reply.

  Thank you

• HP Deskjet 1050 (J410 series): impossible to install the software/driver of printer for laptop Windows 8

  Hi, I tried to connect my laptop (Windows 8.1-64-bit) on my printer (HP Deskjet 1050 all-in-One J410 series).  I tried to install the printer using the CD that came with it, but it shows a message "not compatible with this operating system". After reviewing previous questions here, I tried to download the software driver for this printer. None of these files have no effect with some presenting a message saying that the device must already be installed on the laptop for it to open. Anyone able to help?

  Thank you!

  Hello

  Please download the following installation package, save it on your computer (remember where) after this fight, click on the downloaded file and run as administrator.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Your printer has only USB connection:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03775352/

  So ONLY plug the USB cord/cable when the installation process asking.

  Kind regards.

• HP Deskjet 1050: 1050 printer won't delete document queue the printer on a Surface of 3 pro

  I have a 3 pro Windows 8.1 running surface.  My printer is HP Deskjet 1050.  I printed a document, but the queue of the printer says that the document was still printing.  I tried to delete the document, and the queue has written that it is deleting.  I deleted all the documents in the queue.  It remains, said it is deleting.  I restarted the Surface, the printer off, disconnected and then restarted and all connected.  Always the deletion.  I deleted the printer as a device, but when I add again, it comes with a print queue that is always remove only a single document.

  I am up to date on all updates.

  What should I do?  I can not print anything else, until it disappeared from the queue.

  Hello

  Try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• HP Deskjet 1050 all-in-one: cannot parse with the new 1050

  I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.

  Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.

  When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.

  The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.

  I'm at my wit's end. Help, please.

  Thank you

  Bob

  Hi Bob,

  Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.

  As a reference, you can find the following Adobe article:

  Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
  

  https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html

  You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.

  You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c02063036/

  You can find measures to scan with your printer in the following link:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03548786/

  Kind regards

  Shlomi

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• HP Deskjet 1050 J410 printer: cannot display the estimated ink levels

  Something has changed on my system, so I cannot view the ink levels on my printer Deskjet 1050 J410 estimated.

  When I select the icon "HP Deskjet 1050 J410 series Properties", he used to be option to view estimated ink levels.  This option is gone.  The 4 options that appear now are: 1) the HP printer Assistant (which does nothing), 2). Set preferences, 3). See what's printing and 4). Customize your printer.   None of these options show ink levels.

  I have uninstalled/reinstalled the printer software HP using the DVD supplied with the printer.

  I deleted the printer (using the control panel) and then reinstalled the printer device driver.

  I unplugged/replugged the power and USB printer cables.

  I farm/powered down the system.

  None of the above fixed the problem.

  I'm as Windows 7 Home Premium with MicroSoft's latest fixes.   I don't know when this problem appeared - I noticed when I was printing and got a warning message about the low ink level.

  No idea what caused this problem and how to fix?

  Thank you

  rockydean

  I searched the Internet and found something that solved my problem.   The link to information is:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-109416-2&CC=US&DLC=en&LC=en&os=4063&Product=4027465&sw_lang=

  I do not uninstall anything - just clicked on download.

  Now everthing is great to work with the HP printer Assistant.   Finally.

  rockydean