HP Deskjet 2512: HP Deskjet 2512 not print or copy in black but the color of the works very well

Similar Questions

• C4780 will not print or copy in black; Color looks OK

  HP Photosmart c4780 not print or copy in black. Color seems to print OK. Both cartridges display complete. Problem started after an error message appears that says he has been a failure of the black cartridge. I replaced the black cartridge with a new one.  Alignment printed with only the page surface color - no black areas. Took test page of the HP utility and still printed with surfaces of color only - no black areas. Tried to make a black copy directly on the printer and it acted like it was printing, but just put a page of the Bank. Alignment has tried once again, cleaned heads and a reset (disconnect), but doesn't change anything.  Even after replacing the cartridge completely black again with another new black cartridge, it will still not print from the computer or make a copy of the all-in-one in black.

  I have a Macbook Pro Mac OS X 10.6.8 but these problems occur when you use the HP Photosmart c7180 all-in-one device to make a copy or print a test page.

  Hi SW99.

  The cartridge seems to have a problem. What you can do is to call our technical support at the 800-474-6836 and the agent can determine if the cartridge is defective, and if it is still covered by the warranty date on the cartridge. If defective, and still in warranty, they can then send you a replacement cartridge. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

• New HP 2132 printer does not print anything in or created by the Works word processor.

  For two weeks now, I tried to get my new HP 2132 printer to print.  I have a Windows 7 running and used a HP printer before without any problem.  I get the message that the computer and the printer are not communicating.  I tried all kinds of help and programs of difficulty but nothing works.  Does anyone have any suggestions.  Thank you.

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on the printer.

  I will definitely help you with this.

  Please provide the information below.

  1. What is the exact error message you are getting?

  2. don't you make changes to the pc before that?

  3. which document you want to print?

  4. have you tried any other document to print?

  5 are you facing the question on any specific document?

  I suggest you go through the below methods:

  Method 1: Try to run the printer Troubleshooter:

  1. Press WINDOWS + R.

  2. Type of Panel, and press ENTER.

  3. Click on troubleshooting.

  4. Click hardware and sound.

  5. Click printer.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• B209-a will not print black, but all other colors, including gray work very well

  When I try to print, all the colors, including gray, print very well, but black does not print.  I tried two new cartridges which do not solve the problem.  Also, I rebooted the computer and the printer and clean the print head.  Printer has two years.  Any ideas for troubleshooting?  I'm on Mac OS X Lion (10.7.5) thank you.

  He has not worked for me, but I thank you for your response.  Looks like it's maybe time for a new printer

• Not able to run scripts openscript in prod/staging env siebel works very well in QA

  Hi all

  I designed some scripts to execute on env prod and he ran in QA with all the features enabled automation Server Set up for call center activated auto andSiebel.

  As described in this discussion

  https://forums.Oracle.com/thread/970136

  Did all the steps... But the automation component is not download for the staging of enviroenmnt. Even after the same set up as QA.

  Have no solution for this?

  It would be really useful?

  Thank you

  Radhika

  His works now. Siebel admin for got to add the license key

• HP OfficeJet 4500: OfficeJet 4500 not print or copy of black ink

  My printer acts normal in every way, but all of a sudden, no black ink.  A new cartridge is not

  Fix it.  No sense to me.  Help please.

  Hello

  Please try the steps below...

  On the printer control panel.
  1 > tap Settings, then
  2 > touch tools, then
  3 > touch clean printhead.

  Repeat the steps above for at least 2 times.

  If the problem persists, please call HP Tech Support for further assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Photosmart HP 6520: MY HP Photosmart 6520 not print or copy in black

  I went on this forum and tried EVERYTHING. New cartridges (always use HP) cleaning printhead two online and with warm water and papertowels/qtips.  Re loaded drivers.  Nothing... and I don't even know why...

  Well if you have tried everything on HP website and checked out all the Youtube videos and removed and cleaned the printhead without result.

  Your printer is toast.

• HP deskjet 1000 do not print using windows 7 How to the printer driver

  My hp deskjet 1000 printer do not print using windows 7 How to the printer driver

  It worked before on this PC?

  Full features drivers are here, select the bit version correct victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4066377#n187

• 2540 DeskJet is not printing with windows xp

  Printer works fine with windows 8.1 lap top. When it is connected to the desktop with windows XP Professional 32-bit does not print.

  Solved the problem by changing the 990c driver and the printer now prints. But the scanner does not work. Fortunately the lap top scan so can work around it. But y at - it another driver for the scanner.

  Find printing solution of:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/DeskJet-2540-not-printing/TD-p/3526101

  and to find out how to do it:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

• Firefox Web pages will not print, pdf comes out blurry but fine with browser Safari for MAC OSX

  Firefox won't print Web pages correctly. The pdf comes out blurry but rather using the Safari browser. Apple store could not understand what is the problem. All plugin and java are up-to-date. Has happened since switching to Mac from the PC.

  Screenshots:

  https://www.dropbox.com/sh/m7t35vuo3f1t3mp/6DLjWZmquu

  I found the problem. In very simple terms, it's because I changed the default font to Century Gothic. Change back to the default font of windows, I did a test print to pdf preview and it is not blurry. Now, I'm playing with different fonts to see what will work best. So far I have Arial and Times New Roman both work very well.

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!

• Print CD work is not on C309A Photosmart all-in-one on Mac OS x Lion, but the works of PC.

  HP Photosmart Premioum all-in-one C309A works very well - is wired to the Mac with USB, works PC wirelessl.  Tried to print from Mac CDs and had no drop down menu for the CD option.  Fingered and finally did print from the PC.  Everything, including the 26 April 2012 updates HP for Mac users have reinstalled and could go down drop with CD option - looking, but then print a live project and no longer displayed option.  In fact, he goes out to tell me that the CD print option is not available from the printer, but it works of course easily to PC wireless connection.  I'll keep fiddling with, but someone has experienced this problem and found what is the solution?

  Ok.  I think that we are in business.  I tried the second links you sent.  I make sure to choose the right printer in the list 'Create' and although he expressly told me that "the currently selected printer does not support a direct printing on a CD or DVD", I continue, select a picture or an image, she puts in on paper, but in the form of a CD.  Here, I have to go to the "Page layout" and make sure that I chose the right printer (IE, not the installed fax C309A machine somehow namesake) and I can select CD on the menu drop down and it prints correctly when I send to print.  All the good sport that I guess.   You don't have a lot of different versions to follow and adapt and software updates.  I am pleased to have been able to solve this problem with your help.  Thank you.  If I have other problems, I'll post them on this forum.

• F4135 print on screen, but will not print a copy of the glass

  I can not print a copy of a copy, but it can print from the screen image. How can I fix it? He started just after working well for a while.

  I'm glad that you were able to get your printer to start to make a copy once again, Muzzik.  If this proposal does not work, first check all your ink levels.  Black test consists of all colors that come together to make black.  It is a process that occurs when you print from your PC.  The letter 'e' indicates error with your photo in black and.  It could also mean your ink cartridge door is open according to the document below, but then it would print at all if that was the case.

  -Flashing lights-

  Let me know if you have problems with your ink cartridge.  I hope this helps!

• Epson Stylus dx5000 printer/copier/scanner does not print or copy, scan only.

  Original title: epson stylus dx5000 printer/copier/scanner

  This device is not printing or copying.

  This device is only scanning.
  I continue to be told that the spooler does not work, then stop and restart.
  Did it many times.
  Still no results.
  Epson genuine ink in the printer.

  Hi Carolina,.

  1. What is the operating system installed on your computer?

  2. you get any error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Please follow the methods and check if it works very well.

  Method 1
  Follow the steps from the link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  Clear printer spooler files and select the spooler service.

  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• My MG6320 will not print a copy.

  My MG6320 will not print a copy.  It will print from my PC and it will scan.  But when I try to print I get an error message telling me that I'm in the paper, but I'm not.  Someone at - it experience something like that or know a solution?

  Thank you

  Hi Rich69427,

  You want to make sure that the size of the page and the type selected in the printer matches the size and type of paper you are trying to copy to try and solve the problem.  To change the size of the page and the type selected when copying, please follow the steps located here.

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.