HP deskjet 2515: on the printer
first time after purchasing printer hp good job recently of 3-4 months it does not work... Nothing illustrates conputer connection to printer... can I must go to the service center. Pls suggest me...
HP has no carry in service since deskjets, you communicate with them online.
Tags: HP Printers
Similar Questions
-
PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem
My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem. The blue light just continuously flashes. This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front. I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings. I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem. I think that's what the cable company told me to do.
My printer is mod. # SNPRB - 1204 - 02. If you need made more information let me know. It seems that this should be a quick fix, but I'm not a computer geek.
Hi @first100years,
I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.
I found the following steps in this document: connect the printer after change of your wireless network.
The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network. -
HP DeskJet 3050 a"the printer and the computer are connected to different routers"
I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400). My operating system is Windows 7. What I am doing wrong?
Yes, you have a router, but there two (technically three) networks. I guess that is your printer or your computer is connected to the Guest network. Check that your PC is not on the network of comments.
-
DeskJet 5500: When the printer uses the 57 cartridge?
I thank very you much for your reply to my last post. Makes perfect sense.
I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.
My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.
I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.
If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?
If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.
Thanlk in advance for your help. I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.
Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink. Essentially, it is a primer for the paper. The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page. If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting. That's why, when the same printing black text, the printer uses a color ink.
This printer is able to print reserve mode, which means it can print with 1 single cartridge installed. The printing speed may be slower, but it's an easy way to make sure you are not using any color. For reserve mode, remove the cartridge you want to use. (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!) To leave the reserve mode, put a good cart in the empty slot.
-
HP Deskjet D1320 align the print cartridges fail
Hello
So I recently broke my printer to work on a couple projects. The old cartridges is dead, so I bought brand new and installed today. When installing the latest software of HP printer, the alignment will fail. Step by step:
(1) Center of Solutions HP Open
(2) open Toolbox
(3) device Services tab
(4) align the ink cartridges
(5) align the
However, after click on align, * nothing *. It's as if the part of the alignment of the software was not installed. I * can print * very well, but alignment doesn't matter. I can also print a page of test very well.
I also did the standard troubleshooting: remove and reinstall the cartridges, restart the printer, unplug the printer, reinstall the software. * Nothing works.* again, it is as if the part of the alignment of the software was not installed.
So what can I do to solve the problem of alignment?
Thank you
Drogan
PS OS: Windows 7 Ultimate 64 bit SP1. Connection: USB
You are right. It's a good general practice to align the printer when new cartridges are installed, but it is not mandatory. Alignment is made for purposes of printing quality. On this printer, the print head is part of the ink cartridge. When a new cartridge is seated, it may or may not be in alignment. It looks like your cartridges are in alignment.
You could try to shut down your computer (not a reset) and do a Hard Reset of the printer as described in the following link. Click here After you restart the computer, is there a difference?
If not, and the print quality is good, I recommend you skip the alignment. If you want to be able to make an adjustment, you could try to do a complete uninstall of the printer software and download and install the drivers from hp.com. Click here
-
HP Deskjet 1513: Cancel the print job
Hello
Just as I started a print job, I discovered that I had to cancel it. Why is there not a button easy to find to cancel the job. There is a 'Pause' button, which took me a while to find, but nearby there should be a button "Cancel Print Job". I finally found the queue and remove the work here, but I should not have to go through so much trouble. Designers can send a software update which will be a button "Cancel"?Thank you!
The 'X' button beneath the power button on the front panel of the Deskjet 1513 is a Cancel button. Pressing it will stop printing of a work in progress.
-
DeskJet 3520: Unable to print the map of wedding stationery
I have a card that appears to be too thick - it sticks in early printing, then moves along and print the rest of sheet well. The card is sold as 'wedding stationery' and is thicker than the card I normally use. Should which option I use to print on this map?
Thank you
Printer:
E-all-in-one printers HP Deskjet 3520
The printer specificationsincludes a list of the weight allowed for various documents:
Status bar
Type
Weight
Capacity (depending on the weight of the paper)
Feeder
Paper
64 to 90 g/m² (16 to 24 lb)
Up to 80 sheets
Envelopes
75 to 90 g/m² (20 to 24 lb)
Up to 5
Index cards
Up to 200 g/m² (110 lb index maximum)
Up to 20 or 40
Photo paper
Up to 280 g/m² (75 lb)
Up to 30
Output tray
Paper
n/a
Up to 15
Envelopes
Up to 5
Index cards
Up to 10
Photo paper
Up to 10
"Medium stock paper / card.
Look for a setting in the printing preferences for the type of media "brochure", thick, or similar paper.
"Very heavy weight paper / card stock.
You might be able to fool the parameter defining the type of support to some kind of Photo paper - this media (paper kind) allows a weight up to 75 lbs/280 g/m.
Reference:
Comment
In my opinion, unless you want to print the notice yourself for some reason, this might be the time to look for a local printing Service company that can help by printing the invitations for you with your special message / staff.
You can provide the staff of print service with a sample of your message that is printed on plain paper. This way you are not tempted and then perhaps overwhelmed with choices that may be other than what you have already decided.
Why use a printing Service?
- This printer also beautiful be, isn't able to print invitations from the way you expect.
- The invitations are likely to be expensive and perhaps not easily replaceable.
- The test phase may exceed the number of invitations you want to risk.
If you do, you could remove this in your list of items "I do" and entrusts the care professionals.
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
My answer-click accept as Solution to help others find answers.
-
all-in-one Deskjet 1515: do not print from MS word
My printer prints not MS word.it prints from all other programs except for ms word. Ive tried everything I could think, suggestions
Hey @mangee,
Welcome to the Forums of HP Support!
I would like to help you today to solve the printing problem of Microsoft Word that you encounter when you try to print from your computer Windows 8.1 for the printer all-in-one HP Deskjet Ink Advantage 1515. Because you are able to print from all programs except one, I don't think that what you feel is a conflict driver on your computer Windows 8.1. To resolve this conflict, can I please have you perform the following steps.
How to add another driver:
- Open your screen to Start by clicking the windows button in the lower left corner of your computer screen or by selecting the "Windows" button in the bottom left of your keyboard to the left of the Ctrl key
- In the screen type start "devices and printers
- If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
- In the devices and printers folder right click on your HP Deskjet Ink Advantage 1515 and left click on printer properties
- Left click on the Advanced tab
- Left-click on new driver
- When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
- Select HP as the manufacturer on the left
- DeskJet 9800 select the printer on the right. If Deskjet 9800 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 9800.
- After selecting Deskjet 9800 hit Next to complete the wizard driver new
- Under the printer properties window, select "Apply", but don't hit not OK
- Select the general tab
- Rename your printer HP Deskjet Ink Advantage 1515 at
- Click OK
- Finally, right click on your HP Deskjet Ink Advantage 1515 one more time and click on Printing Preferences
- Left click on the paper/quality tab
- Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
- Press apply and OK
Now that the other pilot is successfully added to, please try to print the new Word.
Please reply to this message with the result of your troubleshooting. I look forward to hear from you!
-
HP Deskjet 2540: Does not print correctly
Hello!
I was wondering if everything can perhaps help me?
I'm in Uni and so have to print several etc test and for all these front page - but every time I try to print this cover on the printer page or amends the provision does not print. Why is this?
The cover page looks essentially like a chart with several boxes.And even if there is enough paper in the printer it says exactly the opposite, I want this problem is easy to fix (remove the film and put it again), but it's starting to annoy me
Is there something I can do?
Thank you in advance!
Hello @alinah,
Welcome to the Forums of HP Support!
I understand that you are printing problems when printing a cover sheet with your tests to your computer Windows 8.1 for the all-in-one printer HP Deskjet 2540. In addition, you have met your printer issues as well with intermittent 'in paper'. I want to help you solve these issues today.
To be honest, the paper intermittent power issue and the cover page number can down to a problem of programming with your printer. If your "brains" of printers is corrupt in any way that the printer is not responding correctly. To make your printers programming up to date, please click here. When the site opens, select the download button at the top left. Allow the download to run. Please follow the instructions on the screen to complete the Firmware update of the programming.
Once the update is complete test please print again. If the number of cover persists, please continue to the next step.
Add another driver:
It is likely that the driver for Deskjet you use is in conflict with your Windows 8.1 operating system, even if your printer is compatible with the Windows 8.1. To ensure that a driver conflict provokes questions, please follow the steps below.
- Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
- In the start screen, type "devices and printers".
- If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
- In the devices and printers folder right click on your HP Deskjet 2540 and left-click on properties of the printer
- Left click on the Advanced tab
- Left-click on new driver
- When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
- Select HP as the manufacturer on the left
- DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
- After selecting Deskjet 9800 hit Next to complete the wizard driver new
- Under the printer properties window, select "Apply", but don't hit not OK
- Select the general tab
- Rename your printer in HP Deskjet 2540
- Click OK
- Finally, right click on your HP Deskjet 2540 one more time and left-click on Printing Preferences
- Left click on the paper/quality tab
- Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
- Press apply and OK
Once the new driver is added, please test print to see if your problem is resolved.
Please reply to this message with the result of your troubleshooting. I look forward to hear from you!
-
power light flashing hp deskjet 3940, &; do not print anything
I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam. I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue. I have tried using different USB ports but no success. I have ensured that 'use printer offline" is unchecked. I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
Hi HPuserSJ,
I just wanted to check to see if the documents of resolution of problems you have been useful.
-
HP Deskjet 2515: Printer has ink but printing does not correctly
When printing it prints only "BOLD" colors, but it comes out of light. The words light out even at all. The ink cartridges is half full and even put in new ink cartridges. I Redid the test of ink and a number of other things, but nothing helped. Please help.
Welcome to the HP community @MaineF,
I wanted to reach out and try to help you with the problem you are having with your Deskjet 2515 printing with print quality problems. I understand the ink cartridges have sufficient ink levels, and that you have already tried a few troubleshooting.
Here's the guide I recommend for you: HP Deskjet 2510, 2520 printers - solve print quality problems
If the quality does not improve, I then and finally suggests contacting HP directly. They can discuss your next printer options, as a replacement or a trade in if they are available.
Click on the thumb to below testify my help!
Click on the "accept as Solution" if I'm you guide to a solution!Have a great day!
Contact HP:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter the product number or select Auto detection
Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
Step 4. Scroll down and click on: contact HP options - click Get phone number
File number and phone number appear -
HP deskjet 2515 print mirror image
How can I print image mirror on a deskjet 2515 when there is no option to mirror image found on the properties of the printer
Hello
You can use the flip option when sending print flip GOLD image before printing:
http://support.HP.com/us-en/document/bpu02032
Kind regards.
-
Mr President, I have HP DESKJET INK ADVANTAGE 1515 PRINTER I want to connect to my two computers with all FIRST Windows XP and the second having Windows 7 operating systems. Kindly help me to do this in detail... THANKS IN ADVANCE
What's your plan for the connection? It is a USB printer only, no network connection. You can connect to a computer and then enable Microsoft File and print sharing on both computers. Or if your router has a USB port that supports printers CAN operate when connected there.
Those are your options.
-
I had my HP Deskjet 3052 a work from PC, MAC, iphone / ipad on my Airlink wifi after a reset on the printer - router - modem.
It fails when I try to use it later in the day - unless I'm resting again.
Do I have to reset each time I print?
New modem/router solved my disconnect problem - but I still cannot connect my imac running Mac OS X 10.5.8.
I am connected to the wireless - i.e. - accesses the internet, I cannot connect deskjet - is told by the way now I hace a 3520e model - instead of the 3052.
-
Reconfiguring a printer wireless deskjet 3520 on the new network.
Hello... I bought and installed my deskjet 3520 on my wireless network and 2 laptops about 1 week ago.
Everything was fine but then a PC started refusing to connect to the network.
Technical support to the Belkin unhooked all the network and uninstalled everything... then reconfigured a new wireless network. Call Net2.
Access both the web very well on Net2 PC but the printer connects is no longer makes sense if he still thinks I'm on Net1.
So... the question is... What is the best way to get the 3520 to be accessible on Net2 on BOTH computers.
I didn't want to screw up whatever it either so have not tried whatever it is me again!
I'm reasonably notified have the installation disc. Win7 operation on both computers. Wired ethernet connection available and can connect each PC with a USB stick if necessary... but really want to use both wireless. I also have original HP print and scan doctor installed from the installation process!
Hope that helps and thanks in advance!
No problem!
When you post again, I'll check in. I wish you the best in getting the printer is connected to the new configuration of the network.
If you need assistance I am more than happy to help. Have a wonderful and safe trip!
Jason
Maybe you are looking for
-
How to uninstall and reinstall norton security
I have Norton Security for 5 devices and put one on my new iMac, but when I click on advanced customize it does not open. Nothing happens. I was hoping that if I uninstalled norton and reinstalled then it would work. I tried to uninstall norton, b
-
I'm not able to easily determine the current version of FireFox, I'm running.
-
Can you please not allowed all computers associated with my iTunes account for *. I am currently 5 out of 5. Thank you
-
10109 with THORLAB DDS220/M and BBD202 error
I am designing a xy-stage. I met the 10109 error that says that 'control Communications disabled HW'. I have attached my code below. There are 2 serial numbers because I have 2 steps. I would appreciate any help on this matter. Thank you!
-
Error code: 0x8024401B (could not install Windows Defender Update)
This is the error of update defernder for Windows (Windows vista Business).