HP Deskjet 3051 a model J611H: printer is in an error state

Similar Questions

• HP Officejet 5740: Msg 'printer is in an error state.

  Hello

  I have a 5740 which is defined as a remote wireless printer by itself in my home network.

  Recently, I received the message 'printer is in an error state' when I press print and found out the print job will be lance automatically, only after I turned the printer off and restarted. What happened several times. I tried to use HP & Doc Scan printing, but this did not help.

  Appreciate your advice on the following points: -.

  1. What is the cause for this?

  2. connecting the printer via the USB port on my HP All in one PC would help eliminate this recurring issue?

  3. If Yes, should I uninstall the printer software first?

  4. always print wireless from my laptop or mobile devices when the printer is connected via a cable to my PC?

  What do I have to uninstall and reinstall the software for printing these devices as well?

  5. when I reinstalled the software, it come a last step where it will ask me to register so far HP ink. As I have already registered for the program, what should I do to allow me to complete the installation of the software without duplicating a new series of HP ink instant registration?

  Thank you.

  Hi @Chrissy_61,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a HP Officejet 5740 e-all-in-one printer with a Windows 10 computer and you need to restart the printer to clear a State of 'error', so the printer will print. I would like to help with that.

  There are also a few different reasons why something like this can happen. It could possibly be network or firewall related, or maybe even related software.

  I would like to begin by downloading and running the tool HP Print and Scan Doctor to check the installed printer software. This tool can diagnose and solve many problems of printing software and printer.

  You can also check to make sure that the printer firmware is up-to-date. On the Control Panel Home screen controle control printer, drag your finger from right to left on the screen and select Setup. In the menu select Maintenance of the printerconfiguration, and then select update of the printer, and then look for the updates of the printer.

  If the printer doesn't have the printing problem with PC and not with cell phones and mobile devices, you can try following the steps described in this document of support - printer is offline (Windows).

  If you plan to use a USB between PC and the printer connection, you do not need to uninstall the software, you just remove the printer devices and printers on the computer and connect the USB cable.

  You can always the printer wirelessly with other devices if you have a computer with a USB cable.

  Finally, you need not re-register with the HP Instant ink. You can close the windows when they open after you have installed the software.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP photosmart all-in-one - printer is in an error state

  When I try to print a pop up says that your printer is in an error state

  printer will copy and scan.

  fhopper wrote:

  When I try to print a pop up says that your printer is in an error state

  printer will copy and scan.

• Printer will not print, error indicates - printer is in an error state

  Original title - printer Epson cx 600 with windows problems 8

  My new computer is windows 8. I plugged my printer Epson cx6000 to him and he will not be printed. Whenever I try to print something I get an error message that says that the printer is in an error state. Any ideas?

  HI Eddie,.

  I understand that the CX600 Epson does not work with Windows 8.

  You can follow the below link to check the compatibility of the printer with Windows8.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=epson%2BCX6000&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Method 1:

  I suggest you to install it latest for the printer manufacturer's Web site form driver and check if that helps. You can follow the below mentioned link to download the latest driver for the device.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=72303&infoType=downloads

  Method 2:

  
  If the problem persists I suggest you follow the article mentioned below.

  To solve printer problems:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: If the problem persists, you can contact Epson for more information

  I hope this helps. If you have additional questions, please get back to us and we would be happy to help you.

• The computer reports: printer is in an error state

  Windows 8 operating system

  Printer is Photosmart A646

  Freshly downloaded drivers

  Tried Hard Reset, nothing helps.

  Ran HP print and Scan Doctor with no result

  Printer tells me that it is connected to the computer, the computer says no.

  Printer tells me to install the printer software, look for the HP_A640_Series icon and double-click it to start the installation. I can't locate this icon.

  Any help would be appreciated.

  Try disabling your firewall and anti-virus. Sometimes, it might be something blocking the communication.

• HP deskjet 1010 series: printer error state

  My printer is in an error state, but after doing the thing does unplug, I can now print the test print. Everything is beautiful nut when I tried to print some documents in my email, it says printer is in an error state. I just nothing can not print from my email, it's paper or the size setting? Can you giveme an idea what it takes then please.

  Hi felicity1,

  Can you tell me what the specific error or an error message is so I can help you?

  Thank you

• HP Envy 7645 All in One Printe: HP envy 7645printer in an error state

  Do not print, error message saying printer is in an error state.  My wireless network Test results came back all good.  How to fix the error state and what it means?

  Welcome to the HP Forums @cijbj,

  I saw your post on your desire 7645 being in a "State of the error" and not printing on Windows 10 and wanted to tender hand to try to help you. I have a few suggestions to start with and would try you them and let me know the results when you're done.

  1 be able to reset the printer:

  • Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.
  • Tip: make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. try to make copies of the printer, If the copies are working properly, proceed to step 3.

  3. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me these results.

  4. try printing and scanning.

  If the copies do not work, please consider contacting HP to see them order a replacement for you printer printers warranty.

  Details of HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  I hope this helps you and guide you in the right direction!

  Testify of my answer today by clicking on the thumbs to the top of the icon at the bottom of this post!

• HP Officejet Pro 6830: Get the printer and the message "the printer into an error state" will not be printed

  Just received this printer refurbished HP 2 weeks ago to replace the one who had a problem with printhead.  Printing worked initially, but now I get the message "the printer into an error state" when I try to print.  The screen at the front of the printer automatically turns off as well, as he is extinguished.

  Hi @M45,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print because the printer is in an error state. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).

  If there's an error message displayed in the menu on the front panel, before the display of the printer turns off?

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Click here to update the firmware of the printer with a USB connection.

  If you have completed all the above steps and your product still has a problem, service the product.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this helps. Please respond if you have any questions. I wish you a nice day!

• Why is my printer in an error state

  Why my printer is in an error state

  Run this.

  http://support.Microsoft.com/GP/printing_problems

  mohanad

• Black HP 802 ink cartridge is not compatible with the printer HP Deskjet 1050 - J410a [model: CH346A].

  I'm Sharjil Ahmed of Kolkata, in India and had bought theHP Deskjet 1050 All - in - One Printer - J410a [product model: CH346A] an online shopping website www.crazeal.com on December 18, 2011, where product information included that I will be provided 62 small HP black cartridge HP 62 small tri-color ink with the product. However, the box consisted of HP 61 small black ink cartridge HP 61 small tricolor ink cartridge.

  Also, I've registered my product on January 3, 2012 and found that ink cartridges that are are compatible with my printer 802 HP ink cartridge black (CH563ZZ) and bought the same, but when I tried to take a print, a message appeared that the HP 802 black ink cartridge is not compatible. That is why I contacted the service center HP of our region where I was informed that compatible with my printer cartridge is HP 61 only and the material of my printer is not compatible HP 802.

  Please help because I was not able to find HP 61 anywhere in my community.

  [Personal information]

  Hi sharjilahmed,

  802 cartridges are right for your region. If you bought the printer from one region other than the India, you will need to contact technical support, so they can help the region getting changed on the printer. Contact for the India numbers supports below.

  DeskJet, inkjet all-in-one, LaserJet, LaserJet all-in-one entry level:

  0047 200 1800, 1800 425 7737.
  0124 387 7300, 0124 234 0917

  

• DeskJet 3051 a direct print from device compatible pictbridge.

  The specifications for the printer online all-in-one deskjet 3051 has said that direct printing is supported for pictbridge compatible devices, which is the reason why I bought it.  I tried to print directly from my Canon camera, which is also pictbridge compatible.  The problem is that there is nothing in the manual of the printer that processes the connection to the camera and the USB cable provided with the camera does not have the USB plug on the back of the printer.  Does anyone know how to do this?

  Hello

  3051 a Deskjet printer does not support the devices memory or Picbridge of entry.

  If you were misinformed by any erroneous information on the HP, contact HP Support site and I believe that you will be provided with any solution besides.

  You can locate the phone number below:

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  My curiosity, could you please let me know where you saw this information?

  Best regards and happy new year!

  Shlomi

• HP Deskjet 3051 a J611: help with Windows 10 drivers? Incompatibility problem?

  Hello, I had to get help with a problem with my printer HP Deskjet 3051 a J611.

  I was always able to properly scan using my printer until I installed the update for Windows 10.

  I use a Sony VAIO computer Fit portable (may 2013 model) originally shipped with Windows installed Pro 8.1.

  After I installed Windows 10 and I tried to use my scanner two weeks later (it prints very well), I can't seem to use the same program I was using before 10 Windows to use my scanner. I tried to use printing HP and doctor Scan to fix my problem, and he told me that my printer had an unknown driver error that it could not solve. I also tried to reset my laptop (and power cycling the printer) and to uninstall and reinstall the driver for my printer.

  One thing to note: I use my printer using the wireless and wired (via USB), Wi - Fi for the scanner and the printer.

  I usually use the printer function when I want things quickly, using an app on my Android phone, or otherwise, using my laptop (wireless, of course). But when it comes to use the scanner, I find it works much more quickly to use it via USB on my laptop via the Wi - Fi.

  Thank you for your help (for that).

  Sincerely,

  ~ Miguel G

  Hello
  
  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Please download and install the software FULL of printing to HP for your operating system (Win 10) features:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050a-e-all-in-one-printer-series-j611/4311836/model/5096936#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Scan with a Deskjet 3051 has

  Hello

  I'm new to this forum so forgive me if I'm been negligent.  I am operating Windows XP. Yes, I'm an old lady on an old computer. In January, I bought a Deskjet 3051 a because my old Scanner HP, finally the waived.  I have been using for several months, but impatient whenever I analysis.

  Is there a place where I can say the 3051 where I want the scan go.  One might think that the Office was a logical place, but mine sends it in a records office where I put the photos.  I read the book and instructions from "the printer scan" and it just says: "locate the image on your computer" is there a way to tell him where to go - politely of course.

  Michaines

  Hello Michaines

  When you load the scan software, you will notice a button Advanced settings... . By pressing will open another window that has 3 tabs: Scan, fileand Destination. The Destination tab has options to change the Base file name ofthe save locationand what to do After the Scan. If Windows Explorer launch is checked that once the scan is done with the scan file will open automatically for you.

  Please refer to the screenshot below.

  

• DeskJet 3051 has Multiple Page Document Scan Question

  I have a printer HP Deskjet 3051 a, scanner, copier.  I run Windows 7 Home Premium.  Is it possible to scan a document that is several pages long and save them in a file?  I have to lift the cover for each other, or I can load them into the paper tray and I have them automatically drawn by?  Thanks in advance for your help.

  Hello

  His maunal from the link shows you have lift the cover to scan.

  (a) you have a high-end printer that has an ADF or able papers power automatically.

  (b) what are the exit?  They are pdf files? If so, you can try a product called PDFsam. You can download from the following link:

  http://www.PDFSam.org/?page_id=32

  This free product allows you to split a large file to many small files (such as the extraction of the chapters of a thick book) and also to Merge multiple PDFs into a pdf file.

  Kind regards.

• DeskJet HP 1510 alignment page print does not correctly

  Ive recently bought a series all-in-one printer Deskjet of HP 1510 and Ive got to the stage where I need to align my printhead. However, the alignment page that is being printed is not print entirely - there are no words on the page at all - so I cannot complete the installation of the printer and cannot print anything. How could I solve this problem?

  Hi shansha1,

  First I press the Cancel - button red X (see image below)

  

  I found this document of support which may help. Please click on the link below:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03800862/

  Scroll down to Solution 6 and follow the steps to print a diagnostic page.

  I hope this helps.