HP Deskjet 3630: Remove the annoying automatic alignment of the printer

Similar Questions

• Printer does not print and I am unable to remove the printer and reinstall

  I have a printer HP1400.  It would not print all of a sudden.  Could not delete the point, that it would not print.  Could not remove the printer either.  Tried to delete as an administrator.  Disconnected everything, rebooted etc but no joy.  Is someone able to help me with this.  I run Vista and have never had any problems before.  Thanks in advance

  Hi Dee31,

  Thank you for your message.

  I suggest clicking on this link and read the article to understand the clean boot method:

  http://support.Microsoft.com/kb/331796/en-us

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DeskJet 5500: When the printer uses the 57 cartridge?

  I thank very you much for your reply to my last post. Makes perfect sense.

  I'm doing a huge amount of B & W / grey scale printing; I use 56 about two cartridges a week and I reload them successfully for a few tens of cycles each.

  My 57 cartridges also mpty very frequently while I print almost any color - the only color is perhaps a small logo on the page.

  I tried to use the gray filter in Macintosh 10.4.11 system to send a grayscale image to the printer, but the 57 cartridge still empty quickly, even if the printed color is negligible.

  If the page still contains the least amount of color, 57 cartridge automatically prints the whole page, or the cartridge 56 prints black and the 57 print the little bit of color?

  If the 57 prints the whole page if it contains ANY color, is there anything I can do in the impression of New York to get the printer to use the cartridge 56 instead? I took to remove the cartridge 57, but when I put again, the printer goes through the cycle of test page, I want to avoid if I can.

  Thanlk in advance for your help.  I can't tell you how much it means for a user that a knowledgeable HP employee has actually answered questions through this forum. Other companies to let users themselves, often to hang in the wind without usable responses.

  Many use printers, not only HP, so-called 'underprinting' this is the pose of an ink of color on the page before the black ink.  Essentially, it is a primer for the paper.  The color dries quickly and is a base for black ink, allowing it to dry and cure without spreading out on the page.  If you have already printed with the cartridges out of alignment and saw a blue or magenta shadow to your text, you see the underprinting.  That's why, when the same printing black text, the printer uses a color ink.

  This printer is able to print reserve mode, which means it can print with 1 single cartridge installed.  The printing speed may be slower, but it's an easy way to make sure you are not using any color.  For reserve mode, remove the cartridge you want to use.  (Find a hermetic place to store this vertical cartridge with the nozzles pointing down as it is when it is installed in the printer, or it will dry out and become useless!)  To leave the reserve mode, put a good cart in the empty slot.

• PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem

  My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem.  The blue light just continuously flashes.  This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front.  I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings.  I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem.  I think that's what the cable company told me to do.

  My printer is mod. # SNPRB - 1204 - 02.  If you need made more information let me know.  It seems that this should be a quick fix, but I'm not a computer geek.

  Hi @first100years,

  I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.

  I found the following steps in this document: connect the printer after change of your wireless network.

  The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.

• HP Deskjet 1513: Cancel the print job

  Hello
  Just as I started a print job, I discovered that I had to cancel it. Why is there not a button easy to find to cancel the job. There is a 'Pause' button, which took me a while to find, but nearby there should be a button "Cancel Print Job". I finally found the queue and remove the work here, but I should not have to go through so much trouble. Designers can send a software update which will be a button "Cancel"?

  Thank you!

  The 'X' button beneath the power button on the front panel of the Deskjet 1513 is a Cancel button.  Pressing it will stop printing of a work in progress.

• remove the printer in "subject: config.

  I uninstalled my printer and then ran ccleaner. When I open "topic: config ' there are about 12 entries listed for the printer I uninstalled. Remove these entries?

  Are these entries also always present if you close and restart Firefox without having to restart the computer?

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• Office Jet 6100: Remove the printer tray

  How did the paper tray removed for transport?

  Hey @Merlot856,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are looking to remove the tray paper from your printer Officejet 6100. The tray is not removable on this printer. I suggest a larger box or be extremely careful when moving the printer so that the tray is not broken.

  I hope this helps and I hope you have a great week!

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Photosmart C4795: remove the printer to computer

  I have a HP Photosmart C4795 who stopped working so I bought another one same model c4795 and my question is that I have to remove the old printer to my computer before I plug in the new? Also I don't have a cd for the new so I can use the old cd? Thanks for any help.

  Hello

  As it is the same model, just go to devices and printers, the existing printer right click and select remove device.

  Onece the device removed, click Start > programs > HP > your printer model and select Add a device.

  Follow the steps on the screen by selecting the link required to set up the new printer.

  Please let me know any questions,

  Shlomi

• HP DeskJet 3050 a"the printer and the computer are connected to different routers"

  I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400).  My operating system is Windows 7.  What I am doing wrong?

  Yes, you have a router, but there two (technically three) networks.  I guess that is your printer or your computer is connected to the Guest network.  Check that your PC is not on the network of comments.

• HP 4635 stuck to remove the print mode and custom print job new shipments in Quebec City

  I just installed the HP 4635 printer to my network.  All devices were wireless print yesterday.  Today, the device of the laptop has a print job that I asked to be removed.  He said "deletion" for two days and I can't get it 'take off '.  whenever I have send a new print job to the goes in the line 'behind' the print job that is stuck in the "suppression" of fashion.  I tried to turn it back on.  re-booting, ctrl, alt, delete.  do anything to get this print job 'take off' and deleted.  Suggestions?

  Hello

  On your computer, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Reboot the laptop and you should find that the print job has been deleted.

  Kind regards

  DP - K

• Can I remove the printer in duplicate at ePrintCenter tab without deleting the original?

  There is a duplicated for my B210a in ePrintCenter tab.

  If I delete one, it will delete the other, or safely remove double?

  Neil

  Neilj99,

  If you go to the duplicate tab and hit the Red 'X' that says 'delete the printer', you should have no problem with the other tab.

• Remove the printer?

  I manage a laboratory of only about 20-30 computers. One of our printers went down then I made new printer profiles so we could double all impressions, to a single machine. I have since deleted on our server and the computer does not display the printers as being there more but Photoshop and Adobe programs are still showing them in the drop-down list. It is causing a lot of unnecessary confusion. Is there anywhere that adobe is looking for a list of printers that I can go and remove them?

  You could try to go to the Page of Administration of CUPS on your Mac and see if you can delete queues additional print in there. You need go to the "Printers" tab on the right, then click on each printer, and under the popup 'Administration', there are 'delete the printer '.

  Don't do this if the printer still appears in system preferences, since that will screw things, but for those who are already deleted it, but always on display upward, the CUPS admin might be what it takes to get rid of the last vestiges of these printers.

• I can't remove the print picturesfrom queue...

  I have a Photosmart C5180 all in one and a HP laptop on a wireless network.  I've had no problems so far. I can't delete two images of the print queue, so I can not print anything else, until they are deleted...  I tried all the solutions to this day in the forum, but cannot find the files listed in Windows 8.  I downloaded the file "HPPSdr", but it does not work even when I say 'yes' when it asks me. I have unplugged the printer and the laptop to power and reconnected... I looked in the Administrative Tools Control Panel and can not find... I typed in the unsuccessful print spooler... I typed Run and Net Stop Spooler nothing helps... I looked for a program and files Services.msc - nothing.  I think that Windows 8 is renamed everything and hidden it away, so we can find.  Any help anyone can give me wil greatly appreciated. Thank you.

  I'll give you a link to a specific document on your printer, but you almost everything he does.  The only step you did not uninstall the printer and reinstall it.  Still I recommend you read through this entire document "printer is in offline mode" since every step inside is exactly the same for the other printers that have stuck in the queue of print jobs.  I never want to do a uninstall myself thus before you make sure that your printer is always connected to the same network as your computer or you will have a hard time to re - install.

  I included a video on How to uninstall a printer in Windows 8 , but it looks like you know your computer very well so you need to may not be it.  And to make sure you have everything you need, here is a link to full feature software and drivers for Photosmart c5180 on a 64-bit Windows 8 computer.  I am interested to know what is happening.