HP Deskjet All In One 2540: problems scanning

Similar Questions

• HP deskjet all-in-one 2540: recording of the scan

  The number of regulatory product is SNPRB-1204-02

  This problem has developed since yesterday.  When I scan a whole page, although the entire page shows, a part of the page shows this option is selected, but I've made the selection.  If I deselect the part or not, only the selected portion is recorded.   I used Dr. printer-scanner, that is no problem.  I couldn't find anything in the FAQ or the forum to address this issue.  I don't remember the exact date of purchase but I think it's less than a year.  Software help?

  Hello

  Before you uninstall the software I highly suggest to check the scan settings in the HP software.

  If you select this option to scan an image Auto-cropping function is likely to be shortlisted and so the analysis may get cropped.

  Please try, follow these steps and tell em that rather those who can solve the problem or not:

  http://support.HP.com/us-en/product/HP-DeskJet-2540-all-in-one-printer/5295960/model/5295961/document/c03941429

  Shlomi

• DESKJET ALL-IN-ONE 2540: HP DESKJET ALL-IN-ONE 2540

  Just installed HP DESKJET 2540 ALL-IN-ONE.  Wireless printing for iPad works great, but PC Dell, print quality a part of the printed text only demi-imprime throughout all documents.  I tried to clean the cartridges, printer, align the cartridges and go through all these steps.  Even the printed sheet of alignment has the lines of half-print on the page.

  Hello @Oregon_Peeps,

  Welcome to the Forums of HP Support!

  I understand that you have a print quality problem when you print your Windows 7 computer to the all-in-one printer HP Deskjet 2540 and autonomous. I would like to help you to solve this problem today. What is unusual is that the autonomous alignment report shows failure to print quality with half-print lines, but when you print from your iPad everything looks great. Because the default occurs on the report of alignment that the problem you encounter is hardware related. Thank you for all the troubleshooting steps you have already finished before joining the Forums of HP's Support. At this point, I'll make go you through some additional troubleshooting steps.

  Please click here to access the print quality troubleshooting procedure. When the support document opens do execute Solution a, Solution three, and five, and six and seven. This includes all sub-steps under the listed Solutions. Pay close attention to manually clean the ink nozzles. In addition, yor need to run up to 3 clean your print head. If you have already run several cleaning please do not operate everything cleans more than ink is used to clean the printing system and we do not want to waste the ink more.

  Once the troubleshooting completed, test please print again.

  • If the problem persists, the alignment success or failure on your machine?

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• DeskJet All in One 2540 series. How can I find the name and address of the fax server?

  I'm working on my Windows 7 64 bit computer laptop and I try to send a fax with Microsoft Fax and Scan and HP Deskjet 2542 all-in - one network.

  When it comes to the name and the address of the fax server, I can't find it.

  Can someone tell me please know how to find it please?

  Thank you very much for this information.

  You use a server on your network, and that is why you do not connect to a fax modem? If so, then please follow this entire document to Microsoft Fax Server Guide for step by stepwhich explains how to find the name of Sever.

  Please post your results again!

• HP Photosmart Wireless e-All-in-one printer - problem scanning B110a

  Using windows 7 Edition family, my scanner everything just stopped scanning and stuck at halfway through the last picture of around 200 photos I've been analyze to create a PDF file, it took me forever and I don't want to rescan all these again, nobody knows how to convince the scanner to create my pdf without a new analysis all these images again , I took the backup of all temporary files it creates during the preliminary scan and the creation of the PDF, such as MaglevExpressTemp (1.4 GB), etc... any help is very appreciated

  Okay, so what I thought you meant originally was not that far from reality. Unfortunately, there is not a way that would be easy to convert these files. I would recommend performing the analysis again, into segments of 30-50 and then you can use PDF SAM program to combine those into a single unit.

  http://www.PDFSam.org/

  In its current form is not a way for you to do what you ask in a simple way. It would be less time-consuming and easier to run it again.

  I would like to know if this is the information that you need!

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• HP deskjet all-in-one 2540: installation manual hp 2540

  I am trying to add an IP address manually, and the default gateway and the subnet mask. When I enter the details below I get an error: invalid input. I changed everything I can but don't know what entry is not valid.

  Manual IP: 192.168.1.249

  Manual Subnet Mask: 255.255.255.0

  Manual default gateway: 192.168.1.1

  Preferred manual DNS server: 8.8.8.8

  Manual of the auxiliary DNS server: 8.8.4.4

  The IP address on my routers range is 192.168.1.100 to 192.168.1.149

  I use Windows 8.1 with a Linksys Dual-Band Wireless-N Gigabit router. My printer is connected to my wireless network.

  Thank you!!

  I finally got the IP address in the manual fields. I followed all the instructions that you have provided, including uninstalling the software and put it back, however, I still received the error 'invalid input '.

  I used IE to make these changes and decided to try to use Google Chrome to see if I have the same question. I don't have. Google Chrome allowed me to make the changes that I wanted to without any problem whatsoever. Thank you for your help on this issue.

  Mike

• HP deskjet all-in-one 2540: error code 5 downloading smartprint

  As other users when you try to download Smartprint, I get as far as "Parameter of Configuration" but then told me "has an unexpected error has occurred-error code 5".»  I can't find any information about the error 5 in the HP support pages. that would correct the problem. If anyone can help, I'll be very grateful

  Hi @xwebfoot,

  Actually, I meant the Internet Explorer browser.

  Please check if you have a compatible version of Microsoft Internet Explorer on your computer.

  What Version of Internet Explorer do I?

  If you use a newer version, you will need to download and install an older version of Internet Explorer to be able to use the smart printing.

  Thank you.

• HP deskjet all-in-one 2540: printer saying phone we not available - it is not

  Phone says printer is not available, but it is

  Thanks wil give that a try. Tried turning off printer but not the phone. Thanks for your advice

• Software for 2540 all-in-one installation problem

  Try to install the s/w for the all in one 2540 on an asus laptop running windows 8.1 64 bit. I get the error message c:\program 5 HP HP desk jet 2540 series\driverstore\yeti\hpvyt11.tnf install a driver package caller must be a member of the management group to install a driver package. As I am the only user on the laptop the full administrator rights so I do not understand what is happening

  Hi @Fish66,

  Welcome to the HP Forums!

  I see that you have a problem installing the software for your HP Deskjet 2540 on your Windows 8.1. I'm happy to help with this installation problem!

  To get help, I'll have to know the following:

  • If the printer is connected, wireless, or USB.
  • If the printer is able to make copies. Copy the text or mixed Documents.

  In the meantime, try the following:

  • Uninstall the software. Uninstalling the printer software. (In case it has been partially installed).
  • Clean boot the computer. How to perform a boot in Windows.
  • Re-install with the HP printer install wizard for Windows.

  Hope this helps, and hope to hear from you soon!

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Help me buy a new all-in-one which will scan to pdf with preview multipage

  I need a new all-in-one, like the OfficeJet HP 6700 Premium e-all-in-one printer, which I watched in a store.  The box was not clear about the capabilities.

  What I do with old HP all-in-one on an old XP, (11-12 years) old machine is scanning documents to preview multipage PDF, so I can adjust the margins and other things, and if I did not have many PDF files for a multi-page document.  I do this a LOT, I need, it is not a such PITB.    I have not found a way to do this with the printers I have, my new computer so I have to go do it on a slow XP machine in another room.  I can only print at the old printer to my new computer.

  I'm used to using the HP, but those I have is old, my old XP machine (6 years) so it is more reliable and my new computer Windows 7 Professional 64 - bit, and Windows 7 drivers for my old all-in-one are not full function, if they still exist, plus we have several computers and tablets on our network now.   None of the older all-in-one I will do what I need for my new computer, if they'll even install (you look, Dell).

  What I need to know, it's done with Windows 7 on HP OfficeJet 6700 Premium e-all-in-one printer?  (Scan multipage PDF with the HP software preview.) The info on the box was not clear.  If not, is there a model preferably wireless all-in-one that will work for me?  I can plug it into a USB port on my new computer, there are several USB 2.0 and 3.0 ports.  I would like to be able to print wireless from other devices, but this isn't a deal breaker.  I don't want to have to download a few fragmentary shareware or buy a high price to accomplish what I was able to do with the software before HP, on old all-in-one.

  That's what I needed.  Why hell isn't in the ^ & *) & ^ % manual?

  http://support.HP.com/us-en/document/c03584750

• 2540 HP all-in-one series - cannot scan

  I recently bought a series of all-in-one HP Deskjet 2540 and the booklet of instructions with it contains NO information on how to scan a document. Anyone can shed some light?

  Hello draffel,

  Welcome to the HP Forums.

  I see that you have a problem with the attempt to scan to your computer.

  I'll give you instructions for all supported computer operating systems that provide detailed instructions on how to scan with HP software or without.

  Please click the following link to view theDocument, then once in the document, select the operating system that is located on your computer and follow the instructions.

  Please do not hesitate to write me with any other questions or concerns.

  See you soon,.