HP deskjet all-in-one 2540: installation manual hp 2540

Similar Questions

• DESKJET ALL-IN-ONE 2540: HP DESKJET ALL-IN-ONE 2540

  Just installed HP DESKJET 2540 ALL-IN-ONE.  Wireless printing for iPad works great, but PC Dell, print quality a part of the printed text only demi-imprime throughout all documents.  I tried to clean the cartridges, printer, align the cartridges and go through all these steps.  Even the printed sheet of alignment has the lines of half-print on the page.

  Hello @Oregon_Peeps,

  Welcome to the Forums of HP Support!

  I understand that you have a print quality problem when you print your Windows 7 computer to the all-in-one printer HP Deskjet 2540 and autonomous. I would like to help you to solve this problem today. What is unusual is that the autonomous alignment report shows failure to print quality with half-print lines, but when you print from your iPad everything looks great. Because the default occurs on the report of alignment that the problem you encounter is hardware related. Thank you for all the troubleshooting steps you have already finished before joining the Forums of HP's Support. At this point, I'll make go you through some additional troubleshooting steps.

  Please click here to access the print quality troubleshooting procedure. When the support document opens do execute Solution a, Solution three, and five, and six and seven. This includes all sub-steps under the listed Solutions. Pay close attention to manually clean the ink nozzles. In addition, yor need to run up to 3 clean your print head. If you have already run several cleaning please do not operate everything cleans more than ink is used to clean the printing system and we do not want to waste the ink more.

  Once the troubleshooting completed, test please print again.

  • If the problem persists, the alignment success or failure on your machine?

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP deskjet all-in-one 2540: recording of the scan

  The number of regulatory product is SNPRB-1204-02

  This problem has developed since yesterday.  When I scan a whole page, although the entire page shows, a part of the page shows this option is selected, but I've made the selection.  If I deselect the part or not, only the selected portion is recorded.   I used Dr. printer-scanner, that is no problem.  I couldn't find anything in the FAQ or the forum to address this issue.  I don't remember the exact date of purchase but I think it's less than a year.  Software help?

  Hello

  Before you uninstall the software I highly suggest to check the scan settings in the HP software.

  If you select this option to scan an image Auto-cropping function is likely to be shortlisted and so the analysis may get cropped.

  Please try, follow these steps and tell em that rather those who can solve the problem or not:

  http://support.HP.com/us-en/product/HP-DeskJet-2540-all-in-one-printer/5295960/model/5295961/document/c03941429

  Shlomi

• DeskJet All in One 2540 series. How can I find the name and address of the fax server?

  I'm working on my Windows 7 64 bit computer laptop and I try to send a fax with Microsoft Fax and Scan and HP Deskjet 2542 all-in - one network.

  When it comes to the name and the address of the fax server, I can't find it.

  Can someone tell me please know how to find it please?

  Thank you very much for this information.

  You use a server on your network, and that is why you do not connect to a fax modem? If so, then please follow this entire document to Microsoft Fax Server Guide for step by stepwhich explains how to find the name of Sever.

  Please post your results again!

• HP deskjet all-in-one 2540: printer saying phone we not available - it is not

  Phone says printer is not available, but it is

  Thanks wil give that a try. Tried turning off printer but not the phone. Thanks for your advice

• HP Deskjet All In One 2540: problems scanning

  When I on my printer each time it prints a test page. I think normally it's supposed to only do when I change the ink. How can I stop this?   thnx

  drakster, after the validation, I used the software to scan my printer for questions, hp ttrobleshooting did not any.today when I turned on the printer, everything was fine. go figure.

• HP deskjet all-in-one 2540: error code 5 downloading smartprint

  As other users when you try to download Smartprint, I get as far as "Parameter of Configuration" but then told me "has an unexpected error has occurred-error code 5".»  I can't find any information about the error 5 in the HP support pages. that would correct the problem. If anyone can help, I'll be very grateful

  Hi @xwebfoot,

  Actually, I meant the Internet Explorer browser.

  Please check if you have a compatible version of Microsoft Internet Explorer on your computer.

  What Version of Internet Explorer do I?

  If you use a newer version, you will need to download and install an older version of Internet Explorer to be able to use the smart printing.

  Thank you.

• HP Deskjet All in one printer model F4280

  I am running VISTA 32 bit OS, and I have a HP Deskjet all in one printer model F4280. After having updated the software and the drivers from the HP website. Printer is on and I connected all the cables ensuring that all are in good working condition.

  I plug the printer by USB connection in my laptop and everytime I try to print anything from any program, including internet explorer 9, he brings just a notice saying ' Explorer crashed and stops.

  Can someone help me?

   

  Hello

  1. What is the exact error message?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Deskjet 3050 a: HP all-in - one Printer Installation remotely

  How can I download and install the remote HP all-in-One Printer software without going through the MS Store?  He wants to put me in place and MS Account and put all my files, etc. on a site not on my computer.  I don't want to do that.

  @Johanned

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  REO

• The HP Deskjet all in one printer/scanner has no control on the printer, then how to scan?

  I can print wireless from my iPad to my printer/scanner HP Deskjet 2540, but cannot see how to scan from the email on my iPad unit. Is it possible to download the control panel scanner/copier on my iPad?

  Hello

  You can scan using the HP all-in-One Remote app, available for the App Store.

  You can find a step by step instructions below:

  http://support.HP.com/us-en/document/c02486319/

  Shlomi

• HP deskjet all-in-one 3632: problems to make eprint to work

  OK, I'm having a problem making the printer to connect to the internet.

  I have a static IP address on my ISP.   I have 1 n600 Router 2 broadcasting networks.  1 5 g and 2 1. 4 g.   I used void net default 192.168.1.1 and 255.255.255.0.   This router I have a win 7 64 home computer hard wired. I also have a hard wired my Office Access point. the access point also broadcast a GIS of different 2.4 g.  all the sig.s wireless use wap2 Protocol and b/g catch up mode. and the names of all different but same network total network, if that makes sense.  OK, I have a total of 4 more also attached computer too either or network win7 32 ultimate win 7 64 and win vista 32. 2 tablets and 3 IH smrt 5.01 lolipop android running.  I have 2 security cams that have a static for IP and port forwarding on them.  everything works fine.  all computers are part of the same private network hmegroup.  I assigned a static ip address for printer dhcp table.  I can print from any device at any time via wifi.  NOW HERE'S THE PROBLEM.  whenever I go to the WEB form, he is saying that its not active all the check boxes and I don't know what a proxy server is but I know that I have not installed on this network so I click No proxy server.  The PRINTER SAYS UNABLE to CONNECT to the INTERNET.  every time that I tried about 20 this weekend.  It says to check the dns, gateway, blah blah blah.  so the DNS are correct and it shows not 192.168.1.1 as the gateway.  He also btw autodetected it correctly.  so when it fails to connect, I click on web print report. I get the page "get the most out of your printer.  and then a white page. and that's all.  at the top of the page to "get the most out of your printer" it says in "BOLD", "your printer is not connected to a network" which is BS do see on every device and every computer wireless or hard-wire. and I open it a new browser window using 192.168.1.143 which is the static ip address for this printer and bam. It opens right.

  When have I forgotten?  can I configure the gateway as the ip of the real gateway side the ISP of my router.   Im a little aggravated because the only reason why I got this printer from walmart that the PHN android already had the makings of plugin hp on them and I don't like HP is cause of all the fluff sofware that comes with them.  I almost had a gun, but they seem fragile and plasticy more than this one does.  so as I said work is expected for printing on the web.  I tried to press the eprint button and it flashes a little and nothing. I pressed it and the 'i' button and nothing ever prints other than the above page.  I have reset to the default values and done everything as configuration 2 x.

  If anyone can help, I would be very happy.

  facorbin

  Hey @Facorbin,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the webservices in the all-in-one printer HP Deskjet 3632. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Enter the IP address in a web browser , and press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  If this goes through successfully, try to activate the web services () again. If you're still coming up short after this point, I recommend you enable DMZ mode in EWS your router, manually add the IP address of your printer. (Based on the level of detail, I suppose you're a statement you know what that means). After completing this step try to enable Web services one last time. Success?

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• 3636 Deskjet all-in-One: ink cartridge is Deskjet 3636 configuration necessary?

  The black cartridge for installation provided with my printer all-in-one Deskjet 3636 recently bought is defective. My printer does not recognize the cartridge. I followed all the troubleshooting steps, including turning on/off the printer and the cleaning cartridge, however, nothing works. What the configuration required to install cartridge? The color cartridge is recognized and the printer is connected wireless. The only issue I'm having is the black cartridge. Could I buy a regular black ink cartridge and use it for the first impression?

  Yes, you must use cartridges for initial Setup configuration and operation of the printer. The best way to solve this problem is to put the printer in return for Exchange.