I am not able to connect on my Satellite A10

I left my Toshiba Satellite A10 at home and a vacation for about a month and a half, but when I came back and switch on my laptop I can't spent the ctrl + Alt + Delete at startup. If anyone has the delicacy to this, could you please let me know.

Concerning

Advertisement

HI Kepueli,

Please could you giove us a little more information about your problem? What OS do you have? What happens exactly when you will start and try to connect?

Kind regards

Tags: Toshiba

Similar Questions

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

    Hello

    I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

    When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

    My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

    Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

    the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

    In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

    I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

    My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

    Thanks in advance for your help,

    Lorenzo

    Hi Lorenzo,.

    To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

    You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

    Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

    http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

    If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

    Kind regards

    Shlomi

  • I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    only title bar opens and nothing else... Please help

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Also check the cookie exceptions.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network

    Hello

    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • Satellite L650-11R - not able to connect to public networks

    Hello.

    Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

    I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

    Any suggestions?

    It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

    Try to compare the LAN settings with others who use the same operating system.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,

    Theo

    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • my ipod nano is not able to connect to itunes.

    my ipod nano is not able to connect to itunes.

    What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?

  • I am not able to connect to the main wifi network but can connect to the network of comments.

    Hello

    This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

    The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

    Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

    Wait a minute

    Turn on the modem first and leave a few minutes, he managed by itself

    Turn on the next device that is connected to a modem and leaves turn a good minute

    Keep turn on devices one by one at a time, one minute apart, until the entire network is back

    Recheck the network and report on your results

  • not able to connect to the game of google on mobile data store

    I bought gold x 2 lenovo 32 GB vibe.

    in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.

    Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.

    and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.

    Please give the solution.


  • Not able to connect to Wifi, USB ports, bluetooth

    Hello team

    I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.

    Product number: G8D85PA #ACJ

    Thank you

    Sunil

    Hi Sunil_motukuri,

    Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.

    Hope this helps you.

    Thank you.

  • I am not able to connect a remote desktop from my laptop computer.

    Remote Desktop connection problm

    I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank you

    Hello

    Is there an error code or the message that displayed when you try to establish the remote desktop connection?
    Try it out below mentioned methods and check if this may help solve the problem.
    Method 1:
    Check out the link and follow the steps.

    Installation Windows XP Remote Desktop Web connection
    http://support.Microsoft.com/kb/284931
    Method 2:
    You can also visit the link below and try the methods in the article.
    How to use the Windows XP Professional Remote Desktop feature
    http://support.Microsoft.com/kb/315328
  • Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

    Original title: Win32/Sirefef.DAtrojan

    Recently, I got the following virus. Win32/Sirefef.DAtrojan

    I was not able to connect to the internet since then.
    Y at - there someone who can help me with the connection to the internet?
    I have a Dell XPS600
    Microsoft XP Professional

    Hello

     
    1. what happens when you try to connect to the internet?
    2 - is confined to the browser Internet Explorer problem?
     
     
    I suggest you perform a full scan of the system.
    Here is a link that will give you know how
     
     
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  • I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

    I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

    original title: Reinstalling windows xp

    Hi Lynn B,.

    ·         What is the exact error message?

    ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

    ·         What service pack is installed on your computer?

    ·         You have the Windows installation disc?

    You can consult the following Microsoft articles:

    Install, reinstall, or uninstall Windows

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

     

    How to perform an upgrade on the spot (reinstallation) of Windows XP

    http://support.Microsoft.com/kb/978788

    Hope this information helps.

  • not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    Hello

    1. don't you make changes on the computer before this problem?
    2. What is the brand and model of the printer?
    3. What is the full and exact error message?
    4. have you set a password to the shared printer?

    Please answer these questions and provide us with more information. This could help us help you better.

    See the articles that may be useful.
    "Access denied" error message when you print to a network printer, or view the properties of the printer
    http://support.Microsoft.com/kb/307053
    Cannot use network printer if your password is not saved
    http://support.Microsoft.com/kb/312055

  • Im not able to connect to the internet?

    Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

    Hello

    1. don't you make changes to your computer before the problem?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network.

    Step 2:

    If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

    Note: Don't forget to restart your computer as usual.

Maybe you are looking for