HP dv6258se laptop shurdown and restart automatically

Similar Questions

• When I open my external hard drive via laptop, windows Explorer restarts automatically.

  When I open my external hard drive via my laptop, windows Explorer restarts automatically. Why is it so? It opens perfectly well in other major tours. I use windows vista.

  Hello

  ·         You receive an error message when you restart the Explorer?

  Method 1:

  You can run a scan on the hard drive to check for errors and repair if there is no performance problem.

  Reference:

  Check a drive for errors

  Method 2:

  Attempts to start in the State of clean boot and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  You can also perform a check and scan SFC if it helps resolve the issue.

  Refer

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• Upgrade of RAM and windows stops and restarts automatically when it tries to load.

  I recently updated my computer running:

  Motherborard: ASUS Crosshair V Formula

  Graphics card: MSI R6970 lightning (2 GB dedicated DDR5)

  RAM: 2 x 4 GB Corsair vengeance 1600 Mhz

  I have another 2 x 4 GB of ram and have tried loading windows vista ultimate 64-bit with installed, the configuration of the bios recognizes that the ram is present, however, windows crashes and restarts automatically when it tries to load.  Any suggestions on how to get this extra memory working out to change my Linux operating system?

  Thank you

  Chris

  Hi Chris,

  You can try to connect a single stick of RAM at a time and see what happens.

  If you are not facing problems, then try to swap the RAM sticks and check for the issue.

• Unexpected shutdown and restart automatically

  Hello

  Is the issue that I'm face using windows vista business.when I use it stop and restart unexpectedly.it will ask me to reboot into different options, I chose normally identify in blue system.i get on-screen and there will be some memory test and suddenly it restarts.

  original title: about the United Nations expect stop and restarting my computer

  I seem to have soe kind of hardware problem.  Look on the computer to see if it's so hot anywhere you can't hold your hand on it without removing it from the heat.  If so, the problem is most likely overheating.  Check that the fan is running and clean the admission and eshaust winds as the best you can (if it of a PC and not a laptop, remove the clover and give it a good glean all the dust, lint, paper or another anthing like this that may block the ventilation openings or interfere with the movement of fan).  Furthermore, it provides the different options when it restarts because that it is not stopped correctly - that's normal when this happens.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (do this for as many devices as you have time for - this can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html (and/or the manufacturer, if they have one available for download on their website).  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  You can also test your RAM to http://www.memtest.org/.  If it fails, test each piece individually to find those who are bad and replace.  If it passes, the RAM is probably OK.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista cannot stop and restarts automatically?

  After you click stop, the system reboots automatically.

  I ran 3 different scans and found nothing.
  System Restore has tried at least 2 months ago, but nothing has changed.
  I recently install anything and it just randomly started to happen.
  Thank you!

  Here are some relevant links:

  Windows vista restarts when I choose "shut down" or "sleep".
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-Vista-restarts-when-i-choose-shut-down-or/4d2b1437-8e62-4c5a-9fce-1251d3f8ccc5

  http://www.Vistax64.com/Vista-General/73246-Vista-restarts-after-shut-down.html

  http://www.Vistax64.com/general-discussion/188274-Vista-reboots-shutdown.html

• How to start, stop, and restart automatically

  Hello

  I'm Pramod.S, I PCI - 5154 digitizer, I'm acquirng data now my question is I want to acquire the data for say 1 min to stop, after the gap of 2: I want to start acquirng again automatically for 1 min. can you please guide me in this way. I'll be gratefull if you send examples to demonstrate this feature.

  Pramod Hello,

  Regarding your question on the acquisition of a min, wait 2 minutes and acquires again for a minute, you'll need to create a program to control the acquisition and away. Is there a programming language you will use to control the acquisition?

  A simple control may use the function time in LabVIEW feature to see how long the acquisition has run before deciding to interrupt the acquisition and become inactive for 2 minutes. A simple implementation to start is attached.

  Hope this helps

• Laptop overheats and stops automatically.

  Original title: My laptop turns off suddenly without any warning

  I usually use my laptop or internet application, browsing through any social networking site and watch videos, while I watch videos or whatever it is, I realize that my laptop heats up a little, the videos don't load smoothly and the next thing you know suddenly stops. It is due to overheating? In addition, there are little space in drive C and f. could it be overheating to cause as many files in drives overheated to treat them? My operating system is Windows 7. Please help me with this

  Yes. The closure is due to overheating and is named as thermal shutdown. Possible causes are a fan failure and dust clogging in the fins.

  Heat is generated when the processor/graphics processor works. It is normal and low free space will not increase the amount of heat produced. Low free space will lag to the normal operation of Windows. You can go to the properties of each partition (C and F), click Disk Cleanup. This will remove all the unwanted and temporary files. It is a good practice to maintain 10% free space or at least 20 GB of free space (depending on which is higher) in the C drive.

• Hibernation and restarts automatically in Hibernate mode

  While my computer is in hibernation, he decided to start up on its own. What are the options I can choose to avoid this? What is Windows Update?

  Hello

  Follow these methods and check if that helps.

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-power-troubleshooter

  Method 2.

  Make sure that you are logged on as an administrator. You can create a new power plan and make sure your new plan as a default to check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows/change-create-delete-power-plan-scheme#1TC=windows-7

  Keep us in the loop to help you further.

• automatic DHCP client, stop and restart

  Please help me

  in my network:

  DNS: 192.168.0.4

  DHCP:192.168.0.3

  each client problems: ""stop and restart automatic dhcp client.

  computer restart all of a sudden and when windows clent dhcp service stop

  Thank you

  Hi Shayan,

  For additional verification on that, we will ask for information. Your computer is connected to a domain network or home network? Please try the steps on this link: DHCP restarts.

  Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.

  Kind regards

  Gilles Ova

• Oracle Forms and reports OPMN OC4J_BI_Forms start, restart automatically.

  Hello

  We run Oracle Forms and reports 10g (10.1.2) virtual server Linux 5 in the test environment, using 5.5 ESXi.

  We have above question (Oracle Forms and reports OPMN OC4J_BI_Forms start and restart automatically) with this server, OPMN logs (ipm.log)

  below please help us solve this problem permanently.

  IPM. JOURNAL:

  15/07/24 11:23:06 [4] ask complete 2. Command: start

  15/07/24 11:23:55 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:23:55 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:23:55 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:23:55 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:24:45 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:24:45 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:24:45 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:24:45 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [3] [libopmnoc4j] attempt to ping OC4J has expired

  15/07/24 11:25:35 [2] [libopmnoc4j] AJP13: error reading response AJP13

  15/07/24 11:25:35 [2] [libopmnoc4j] URL to Ping for proc: 1506214241 a failed ping url: / reports/rwservlet/pingserver? start = auto

  15/07/24 11:25:35 [4] [libopmnoc4j] process Ping failed: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [4] [libopmnoc4j] inaccessible process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:25:35 [4] restart process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:35 [4] process shutdown: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:35 [4] [libopmnoc4j] with strength of the termination process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:9643)

  15/07/24 11:27:37 [4] from process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:0)

  15/07/24 11:27:40 [4] living process: OC4J ~ OC4J_BI_Forms ~ default_island ~ 1 (1506214241:10657)

  OC4J Log:

  ========

  --------

  15/07/24 11:38:29 stop processes

  --------

  15/07/24 11:38:29 closing...

  15/07/24 11:38:30 using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 11:38:30 REP-56040: rep_abc_oracleas1 server already exists in the network

  --------

  15/07/24 12:14:55 start

  --------

  15/07/24-12:15 FormsServlet init():

  configFileName: /d01/oracle/OraHome_1/forms/server/formsweb.cfg

  testMode: false

  15/07/24 12:15 oracle Application Server containers for J2EE 10 g (10.1.2.0.2) initialized

  15/07/24-12:15:20 by using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 12:15:27 ListenerServlet init()

  15/07/24-12:19:29 by using the oracle.reports.util.EnvironmentGlobal class

  java.lang.NullPointerException 15/07/24-12:19:32

  15/07/24-12:19:45 by using the oracle.reports.util.EnvironmentGlobal class

  15/07/24 14:03:19 session of shapes < 42 > abandoned: unable to communicate with the execution process.

  Kind regards

  Hello

  To resolve the error java you need to change ressemelable and java cache settings report error see the link already discuss

  https://community.Oracle.com/thread/847864?start=0&TSTART=0

  I hope it will be useful.

  Thank you.

• Satellite A500 - crashes and restarts when I play games

  Help, please

  For these last months, I had a problem with my laptop crashing and restarting in 10-20 minutes from a game.

  Please help, give me ideas or tell me how to find out what the problem is, I have read a few other discussions to talk about questions of heat but no real answer on how to solve the problem.

  Help, please
  Thank you
  D

  Hi Dale.Johnston,

  Overheating would be a typical pattern of this behavior. I mean, that's if the laptop has a higher internal temperature and it will immediately fit to protect the equipment. Then it the normal behavior of s from overheating.

  Overheating may have different reasons. In most cases it's dust that blocks the fan. This would mean that you have to clean the cooling system of your laptop using the jet of compressed air to blow the dust from the cooling fans.

  Generally, it should help. If this isn't the case, I would check the display driver. What display driver and operating system you are using?
  If you install the display driver Toshiba not they can also cause overheating if it recommendable s using Toshiba pretested drivers only. ;)

• Want to m6: 10 Windows my laptop restarts automatically when I click on shut down

  Initially, I had the common problem of my computer stops do not after upgrading windows 10. None of the solutions worked for me, I had no MEI version 11, I got the 9.5 version that does not apply to me. My computer always has a black screen while the power light and fan were still on. After that I followed the suggestsed improvements in the HP support, my computer was blocked is no longer about the closure, but won a new. Whenever I click on the windows, then the power then my laptop stop will be closed for a few seconds and then restarts automatically. I don't want to always hold the power button to turn off my computer. I tried also what does the power of sleep button to stop switching and the problem always arises. I also disabled automatic restart if the computer breaks down. I also tried things release so that they won't wake up the computer. I am very confused and that you can find the older forms of windows 7 and 8 only. I can't find anyone with my problem or a solution. Please help me.

  I tried to find aspecific sollution to your problem, but I could not. However, I found a forum of Windows poston with something similar, only on Windows 8. Maybe you can try and check if the sollution they gave this user works for you

  Here is the link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/Windows-will-not-shut-down-but-restarts-instead/56b2d6f6-5236-4b06-a386-3452506f549d

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?