HP envy 15-j186na: use my second slot mini 40.Picie for one ssd?

Similar Questions

• Hiding HP ENVY 15 t-j000 Quad Edition w/SSD and hybrid propulsion system. Swap disk for one SSD Question.

  Hi all!

  I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?

  I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.

  So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?

  Any help with this is appreciated!

  Purgingomen wrote:

  Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.

  I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.

  But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.

  -Rob

  Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:

  http://en.Wikipedia.org/wiki/DD _ (Unix)

• HP Pavilion 17-e019dx have a second hd for one SSD slot?

  I was wondering if anyone could tell me if there are in any case to keep the 750 GB HD-5400 RPM notebook is came up with, while adding / upgrading to an SSD of 256. It is not profitable to buy one of the WD Black HD (1 TB + 128 GB SSD) when I could just use the extra I spend on the WED to get a bigger "badder,' SSD drive and get an eclosure for the current 750 GB HD)

  I already have a corresponding 4 GB Chip to bring the total RAM 8 GB, and it's only another development that will make a significant improvement on performance... unless he has other suggestions?

  (I know, I know, I should have looked when I installed memory, but this Panel back don't NOT only 'pop' off easy, and I don't want to take the risk of braking it when there are these well informed and helpful people here!)

  Thank you in advance!

  Your laptop is a type of single player. There is no current empty HDD Bay.

  

• How can I migrate JUST a BONE from a HARD for one SSD drive, by the way, the HARD drive is a laptop and I use the SSD on a new office, I just built.

  I tried to start with my computer desktop laptop HARD drive, which of course, did not work.

  and I can't connect several hard drives or SSD for my laptop, how do I migrate JUST windows 7 and not the rest of my hard drive to my new SSD?

  Install Windows 7 on an SSD will require a "clean install", using your original Windows 7 installation DVD.  Please review: Windows 7 and SSDS: secrets and tweaks of the development of installation

• How to use the second HARD drive of Satellite A210 - BP1 for mirroring

  Satellite A210-BP1 came with 2 HDD (160 GB).
  Now, I want to use the second hard drive mirrored the first, one that has Vista installed.
  This should be done without supervision and in real time - as a RAID 1.

  How can I do this?
  I also have Vista professional available and I would be willing to use 3rd party software as well.

  Thanks in advance for your answers.

  Hi Jan

  I doubt that this is possible
  Why? The point is that you need to use two hard drives in mirroring, RAID striping, mode etc technology
  Satellite A210 can't RAID. It s only a SATA controller without RAID capacity!

  Therefore, the final answer is; NO, it is not possible to use mirroring

  Concerning

• Satellite Pro T130 - 14L: 100% CPU use of acpi.sys after changing the HDD to SSD

  Hello

  because I changed my for one SSD HARD drive and reinstalled Windows 7 with 64 bit on this subject, my system works frequently in 100% CPU utilization caused by kernel module acpi.sys, I discovered with process Explorer and confirmed by recording an ETL file.

  This problem occurs once an hour on average, sometimes after 10 minutes of functioning of the system and sometimes after two hours, no matter which programs are running and whether or not I is actively using the computer. When I noticed a hanging and see this 100% cpu core in the process Explorer window are currently in use, I always need to save my work (which may take a few minutes) and restart the computer.

  I could live with that, but it's pretty nasty. My bios is up to date (version 2.70), as well as my other drivers (no error and no virus found). In other forums I've read, these problems could be avoided by changing the energy registers something Windows settings as never go to sleep of the SSD, but it works in my case as I disabled all energy saving options in Windows and I still have this problem.

  Is there maybe an update of the unofficial bios that could solve this problem?
  I read in another forum, that an unofficial bios update Dell fixed a similar problem on a Dell computer.

  Can someone help me solve this problem please?

  Details of process Explorer:
  The wire with TID 160 and the start address:

  ACPI. SYS + 0X1AF7C

  suddenly starts using 100% CPU and does not stop until you restart.
  Similar problem as in this forum for a Dell PC:
  https://social.technet.Microsoft.com...UM=w7itproperf

  Unlike the Dell problem, there is no appropriate-updated bios for me, could you help me if you could tell me how to stop the kernel module (if it starts hanging or even before). Then I could at least avoid frequent restarts.

• Satellite P70 - how to use the second HARD drive?

  I have recently bought a satellite P70 - A - 10 d.

  I see that there is no second location on hard disk, so I can install a second disk.
  You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

  But I can't understand how screed the disc.
  Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

  Hello

  If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

  Welcome them

• HP pavilion 15-p153nm: I can't find the second slot of memory RAM... pls help

  So I bought the new laptop (hp pavilion 15-p153nm), in the shop where I bought it says that this laptop have two memory slots, so I buy the new 4 gb ddr3 ram card and wanted to put in the free memory slot, but when I opened the laptop that I couldn't find free one slot... so my question is where is this second slot... I use other products (printers and laptop computers HP etc.) for 10y and if this is an hp error and they didn't put the second slot in this notebook, I'll be very disappointed.
  And yes I find manual for this laptop, I opened this laptop from this manual and he drew two memory cards but its all is said about memory cards. I have pictures of the laptop and everything and I will put them here.

  

  

  Configuration software Specy

  

  It says that I have a free slot? but I still don't see.

  Now I'll put pictures of the laptop inside

  

  under the keyboard

  

  Other side of the main card

  

  Under the motherboard

  So pls help me to solve this mystery of the second memory slot.

  And sry for my English isn't my main language.

  TNX for helping me. Good bye

  There is no second slot of memory in this model specification.

  You need to replace the module installed with a capaity module above uppgrade the memory capacity.

  On the three t pageit the manual describes two locations only on some models. It does not describe what models they are.

  

• The HP Envy 700-327C there a second CD player?

  HP Envy 700-327C has a second CD drive or is this a slot to install a?  It shows a picture of a screwdriver; This could mean one is necessary to unlock the drive or is necessary to install a drive?

  Hello

  I have not seen a pre-built machine that has 2 ODD. This machine has an ODD, but there slot to spare for a second ODD (or CD/DVD drive).

  http://support.HP.com/us-en/document/c04291966

  Kind regards.

• The amount of additional memory can be placed in the second slot. Best battery?

  The details of my laptop are: system manufacturer Hewlett-Packard model system Presario V6000 (GG228PA #ACJ) Type of system based on X 86 PC processor x 86 Family 6 Model 14 Stepping 12 GenuineIntel ~ 1862 Mhz BIOS Version/Date Hewlett-Packard F.25, 12/05/2007 SMBIOS Version 2.4

  Total physical memory 512,00 MB DDR II. (2 Rx16PC2-53005)

  1. how much additional memory can be placed in the second slot.

  2. If I use only one slot, the total amount of memory can be placed?

  3. What battery Ah maximum can be changed to the existing farm CT: 6301501BB UNFRJ and its cost?

  Maximum total memory is 2 GB and the unique maximum is a 1 GB module. It uses of the SO-DIMM DDR2-533

  This is a new battery 12 cells on eBay:

  http://www.eBay.com/ITM/95W-genuine-rechargeable-12cell-battery-fit-HP-DV2000-dv6000-V3000-V6000-EV089AA-/390317484515?PT=Laptop_Batteries&hash=item5ae0bc29e3

  It will be a bit curved on the bottom but the most long-life battery, that you can buy for him.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to factory reset an imac using the second screen

  How to factory reset or restore my system using a second screen

  
  

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Is possible to use the second HDD in PPM81E Portege M800-105

  Hello!

  Does anyone know, if it is possible to extend a Portege M800 - 105 model No. PPM81E with a second HDD?
  Is there a MediaBay for the DVD player to install a second hard drive?

  My goal is to use a Solid State Disk (64GByte) as the first disc (System only) and store all user data on the second drive.

  Best regards
  Sven

  Hello

  To my knowledge it is not possible to use a second HDD Portege M800.

  The laptop supports eSATA connection so you can connect an external HARD drive.

  Welcome them

• Satellite Pro P300-26U - can I use a second HDD?

  Satellite P300 obligations food raid0 and double HARD drive. All models? Manual of 26U don't say a word on the subject. Model as P300-1BP has double HARD drive.
  Can someone help me? I want to buy a P300-26U in Italy.

  Thank you.
  Guido

  Hi mate,

  Who said that the Satellite Pro P300 takes supported RAID? AFAIK P300 series don't have RAID controller and in the specifications detailed on the Web from Toshiba site I can't find anything about this

  Satellite P300 it of only possible to use a second HDD if it has a second HARD drive connector. You can check it if you remove the second HARD drive. If you can see a second HARD drive connector, you can use a second HDD.

• Satellite A200-1 s 5 - can I use a second HARD drive and RAID?

  Hi all

  Toshiba Satellite A200-1 s 5 is eligible to add a second hard drive? It has RAID controller as much I know - it might help?

  Thank you
  Denis

  If you have a SATA connector in the second HARD drive Bay, you can use a second HDD. Check it!
  Then you can buy each disc HARD what you want with SATA port.

  The Satellite A200 doesn't have a RAID controller.