HP Envy 17-J005tx

Similar Questions

• HP ENVY 17-j005tx Notebook PC, AccelerometerSt.exe - open pop - start up of the system error

  Hello

  I use a HP ENVY 17-j005tx Notebook PC with the latest installed Windows 8.1.

  Whenever I start my computer, I get the following pop-up message:

  "AccelerometerSt.exe - system error - cannot start the program becaue mfc110u.dll is missing on your computer. Try reinstalling the program to fix this problem. »

  I don't know how to fix this? There are a lot of questionable research sites that offer downloads for these "missing files" but I'm sure that's not the solution.

  Could someone possibly offer me some advice of bette?

  Thank you in advance.

  Hello

  The missing dll is part of HP 3D DriveGuard - you can download and reinstall this software from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards

  DP - K

• Replace drive HARD system with Samsung EVO SSD 1 TB of HP ENVY 17 - j005tx laptop computer

  Hi all

  Wanting just a few tips on how to migrate and replace the system drive without having to reinstall everything again.

  The Migration of Samsung tool work?  When I check my HDD in the laptop there 5 partitions...

  The HARD drive, I would like to replace a the following Partitions:

  400 MB (Recover Parition)

  260MO (EFI Partition)

  904 GB (drive c :) - NTFS)

  350 MB (recover Partition)

  25.5 GB (drive D: Recover - NTFS drive)

  According to the Samsung User Guide data Migration tool, he mentions the following:

  http://www.Samsung.com/us/support/owners/product/MZ-7TE1T0BW

  6 recovery OEM partitions, at the plant by computer makers, cannot be replicated. However, if the PC is manufactured by Samsung and SRS (Samsung Recovery Solution) 5 or 6 is installed, the recovery partition is automatically cloned. (Not supported in versions prior to SRS 5)

  How can I migrate all recovery OEM as well as partitions C: and D: partitions?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  If you burn the recovery DVD, you don't need the recovery partition... they hold the same data. I try the clone on the new drive and see if it works. If it isn't then you still have the original drive and nothing has been lost. Reported problems with the migration of Samsung software. Personally, I use Acronis True Image Home for cloning, and it is not.

• ENVY 17-j005tx BIOS CORRUPTION - URGENT

  Hello

  I have HP ENVY 17-j005tx and it showed the HP updates and let it install automatically. He invites restart me my laptop for the bios upgrade. The laptop was on the current and it restarts and I confirmed to install bios when it restarts to the UEFI bios update page. After all the blocks have been written he restarted, it self and gave me a blank screen. Then all of a sudden it turned off it self. I waited, but nothing happened. So I decided to turn on. And nothing appears on the screen (the screen is not turning on at all) and the WiFi led is on (orange). I realized the Caps Lock led flashes twices during startup. I read on the HP site and defines it as a corruption of BIOS. I also read in one of the HP help pages by pressing Win Key + B while turning on the laptop, it should bring up the BIOS recovery page, but it does not work.

  It would be great if someone can help me with this problem. I have not guaranteed + insurance but I do not know there is a way to fix this problem before going to the store for a replacement. Also, if someone could please send me a partition of their Envy 17-j005tx HP_TOOLS (to get the bios such as 0xxxx.fd files, 0xxxx.) BIN, 0xxxx. BIN. DEC and 0xxxx. (GIS). This will help me to include these files in my HP Flash DRIVE recovery. (I install a HP UEFI environment [HP_TOOLS] on a USB key from another HP laptop I have - I need the files mentioned in order to Flash the bios)

  Download the softpaq diagnosis on another PC. Connect a USB to the computer even. quevous use and double-click the softpaq. Choose to install the PC_Tools to the USB STICK. You can also download the versions earlierer of the BIOS the drivers download support web document and extract the softpaq to use as source for BIOS files you requested.

  

  

• HP ENVY 17-j005tx Notebook Finger print reader questions

  Hi all

  Already a few weeks or so, my fingerprint reading begins to play up - when I start the laptop, it seems do us somehing to the connection and logon fails permanently - when I try to open a session keyboard always fingerprint reader sends something and can not connect - it just cause connection to fail over and over in a loop.  I can just manage to turn off the laptop by clicking on the button turn off and select the off option.

  I found a reason if I hit F10 to enter the BIOS setup, e and exit, reboot all goes well.  Then I can use the fingerprint reader to log in again. Then a few weeks can go and the same thing!

  What gives?  Someone at - it suggestions? Is this a bug of material or something - it is possible to disable the fingerprint reader so that if in the future he sticks completely upward, I would at least have the ability to disable.

  Jim

  8.1 Windows x 64

  Validity Sensors, Inc. - 4.5.122.0 - 19/03/2013

  HP Simplepass 6.0.100.276

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Hey JimT.

  For the fingerprint reader not working not properly, I've included the document ' a (Windows 8) fingerprint reader troubleshooting'.» Please follow the steps in order for best results.

  So, there is a fingerprint sensor driver update digital validity. I got it here for you. This pilot has a version of the 4.5.228.0 Version and was released on 09-30-2013.

  Please let me know if these steps solved the problem, thanks.

• HP ENVY 17-j005tx Notebook PC: network card wireless Intel N 2230 sporadic but recurrent connection Wi Fi problems. Which driver to use?

  I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.

  In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.

  When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.

  Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1

  • Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
  • Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB

  If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.

  The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)

  It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.

  If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?

  Which driver should be used?

  Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?

  HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.

  Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.

• HP Envy 17 and Raid-0

  Hello

  I have an Envy 17-j005tx (Australian model) and hoped to Exchange internal 1 TB 5400 RPM HDD to the SSD and it places in a Bay Raid-0. I understand the pro/cons on different Raid configurations.

  I do all my work in virtual machines, with instant regular backed up over the network. So if they are not lacking, in theory downtime is limited to the time it takes to get new readers and the time to copy the snapshot in return.

  Q:  It is possible to configure the 17 want to start the Raid array-0? and wouldn't be a hardware or software raid?

  Manual stipulates that cell has 'Accelerometer (HP Mobile Data Protection System 3D) RAID 0/1 Support' - I'm looking for more information/confirmation before buying the hardware.

  Hello

  Your laptop supports the RAID, you follow the links of Intel and HP that is mentioned below.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-015988.htm

  http://WWW8.HP.com/us/en/HP-search/search-results.html?ajaxpage=1#/page=1&/cat=support%20%26%20Drivers&/cc=us&/lang=en&/Qt=RAID%200

• HP ENVY 120 drivers e-all-in-one for Windows Home Server 2011?

  Hi all

  I tried to install Windows 7 x 64 driver HP ENVY 120 version and also the same Vista and both fail with an error related to the incompatible driver.

  Can someone please help tell me what driver can be used for this printer on Windows Home Server 2011 - I'm surprised there is no driver 2008 too?

  JIm

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  No, there is no driver for the Windows Home Server 2011.

• Why HP Touchsmart weather does not save my location?

  I click settings and enter my playing position, and then select the city.  Then change to Celsius - I click OK and everything seems fine.  But after the next restart these settings are lost and go back to Cupertino, which is thousands of miles away, infact in all across the globe.

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Oh, I think I found a workaround for this problem...

  http://www.geektieguy.com/2008/12/17/HP-TouchSmart-software-update-weather-always-reverts-to-the-location-set-before-the-update/

• How is it possible to reset the game Burble Place from beginner, intermediate or advanced?

  Hello

  My son likes to play instead of Burble games and has fairly well mastered the beginner... There are other levels (intermediate and advanced).  I tried to reset the level, but when he enters one of the Burble games after resetting the scores, it is always configured for beginner - I would have thought I could choose a new level as intermediate or advanced... but no option to be able to do this...

  any ideas?

  Thanks in advance...

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer
  You must open the game first. Then you can select the game in the menu at the top, then press Options. Make sure you click OK.

• Problem with Windows Media Player Audio sync DivX playback in full screen

  Hello

  I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

  I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

  While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

  in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

  BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

• How to load Microsoft Media Center TV from inside the Touchsmart request

  Hello

  I would like to be able to run Microsoft Windows Media Center of the Touchsmart software, however I don't seem to be able to add the Windows Media Center application to the list of "Targets" Touchsmart, in fact I thought that this would be already listed as target - but is not...

  In the case, I tried to add it manually in my target field but I get an error in pink bounce foolishly saying

  "The target entry is not valid. If please check spelling and re-enter the target. »

  Here's what I did and would expect it to work, but don't - mind if I get this you right from the start-> execute command or in a shortcut, the command works, it loads and runs the TV without going through the Media Center Start menu...

  In Touchsmart app,...

  1. click on customize

  2. click on add a tile...

  3. click on the type of program, and then click Next button

  4. in the type of field target in:

  C:\Windows\EHOME\EHSHELL. EXE /HOMEPAGE:VideoFullscreen.XML /PUSHSTARTPAGE:TRUE

  5. in name, enter "TV".

  6. choose an icon in the icon list

  7. click on OK

  (Here is where I get the mentioned error)

  Thanks in advance...

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  In fact, I think I solved the problem!

  I created a link shortcut on my desktop with the command line and then instead to enter the command line for the target to step 4, I entered the link shortcut instead, for example I created the shortcut first and placed it on my desktop with the following command line:

  C:\Windows\EHOME\EHSHELL. EXE /HOMEPAGE:VideoFullscreen.XML /PUSHSTARTPAGE:TRUE

  I named the abbreviation "TV".

  In step 4, I entered the target manually as:

  C:\Users\Jim\Desktop\TV.lnk

  And then the rest of the steps, now I see the tile in Touchsmart and I am able to run the TV in Media Center live!

  But I still don't understand why Microsoft Media Center is not listed in the default target list...

  Cheers... (Yay for me lol)

• Is there a way to adjust the feet on the iq500 if monitor sit on the best angle

  I read on the documentation and the best possible angle is 10 degrees, I was wondering if the feet are angled roughly 10 degrees or less in the direction of oppisite to the monitor the monitor can sit safely at an angle better than it does currently...  Has anyone tried a readjustment of feet on iq500?

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  CarolinaPhotogu wrote:
  

  You need the VESA mount option. This way your minimum angle would be completely vertical and you could open it up to a negative 10 degrees.

  I hope this helps.

  Pete

  Thanks Pete,

  Just did a search on google for VESA + IQ500 + TOUCHSMART + MOUNT and found this...

  http://EzineArticles.com/?HP-TouchSmart-wall-mounting-VESA-mount-adapter-for-HP-Dx9000-and-IQ500-series-TouchSmart-PC & ID = 886040

  The VMAHP-22 VESA Mount Adapter to iVERSAL fit correctly to commercial HP dx9000 TouchSmart PC Business and office of consumer from the IQ500 series;

  So go check it out! Woiuld be good to mount to the back of the office with an adjustable mount...

  

  Message edited by JimT on 31/01/2009 23:25

• How can I configure surround 5.1 on s3480a?

  Hello

  I'm unable to configure audio options 5.1 on my s3480a - I have the spdif digital (COAXIAL) connected the PC to the audio receiver 5.1 surround, but all I can get is 2 stereo channels only.  I need to install a driver or some 3rd party software plug-ins for Windows Media Player in order to use the 5.1? What is the problem?

  Thanks in advance...

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  oooohhhh mmmmaaaaannnnnn...  I can't believe my ears!

  I left out of Windows Media Center and then loaded by Windows Media Player, charged the high van halens "I don't want to hear" and all played in 5.1...

  now I'm really confused, that nevertheless I'm too wrapped

  So I think that the solution is primarily run Windows Media Center, load and play music.  Then, this should do the trick, or was it the r2.17 of the realtek driver?

• Anyone know the actual weight from the iq500?

  OK - I just got my kit VESA adapter for my iq508a, (photo below - more information http://www.iversal.com/ ) seems very solid, sturdy and neat, but do not have as yet, I need to buy a desktop stand for it - now I have my eye on an office of the couple is at this moment but you need to know the approximate weight of the iq508a.

  I searched through the specification sheet where these sorts of data items are usually found, but don't see anything about the weight.

  I tried my home scale, but they are designed for the feet and not something that is flat and does not weight.

  If anyone knows if the iq500 are anywhere near 10 Kg of weight?  No one knows the exact weight give or prendre.5 kilo?

  

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  There is a very easy way to get the exact weight of your IQ500.

  Just hold it while you stand on your scales.

  Then re weigh you and subtract the higher to the lower part.

  I hope this helps.

  Pete