HP Envy 17 j021nr... not 5 GHz supported...?

Similar Questions

• HP ENVY 7640: new HP Envy 7640 will not feed documents in scan mode

  New HP ENVY 7640 will not feed for scanning documents.  It transmit documents in copy mode but not when you try to scan several pages.

  Hello

  Thank you for using the HP Forums.

  Have you installed the software features FULL?

  If this isn't the case, please download and install the FULL features software:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have done this, launch the Scan software (via the HP printer Assistant) and make sure that the source is "heavy use document feeder.  (Example shown)

  

  For more tips scan, please reder to this resource:

  Scanning for Dummies

  Your printer uses the NEW interface of scanning.

  Hope that helps!

• HP ENVY 17-j021nr upgrade less than NEED of DRIVERS in Windows 7

  Hello

  I had a devil of a time without downgrading my envy 17-j021nr. Any assistance in finding the right drivers for my system would be much appreciated. The hardware id is the following:

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101 & REV_1000

  USB\VID_138A & PID_0050 & REV_0060

  PCI\VEN_8086 & DEV_8C22 & SUBSYS_1966103C & REV_05

  PCI\VEN_8086 & DEV_8C22 & CC_0C0500

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C & REV_01

  PCI\VEN_10EC & DEV_5227 & CC_FF0000

  Currently, the beats audio does not work. It does not seem that Nvidia graphics are available. As I said, I was really banging my head against the wall with this company and I would be grateful help greatly. Thanks in advance!

  Hi Jpalmer01,

  It is one of the most common problems when decommissioning is looking for drivers. If you managed to find the drivers it still can not work properly. Your particular model is switchable graphics and can not work properly because the drivers are specially configured to work with your model. That being said, I will do my best to try to find the drivers for you.

  This is an audio driver for Windows 7. I can't guarantee that your Beats Audio will work.

  PCI\VEN_8086 & DEV_8C22 & SUBSYS_1966103C & REV_05

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1966103C & REV_01

  IDT high-definition driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-113849-1

  I was unable to find the USB hardware ID, but I made a few that might have with your question NVIDIA.

  Thank you

• HP dv6 Envy: battery, do not charge, the light goes blue/red then off

  Slowly, the battery started not charging, the day before he arrived he was in charge, but that once plugged waiting a bit with it, or I have to turn it off and keep the adapter to plug again. In its sequel, the light is not on to signify the load and it does not charge. When the laptop is turned off and I plug in the power adapter, it goes to a blue light, red light, then in the same model, do not at all support. I wonder if there is a problem with the battery, solder or simply the motherboard itself. I tried a new power supply and took out the battery, when its plugged in without the battery, pressing the button power turn on turn on for a second, but it used entirely and the charging light will also turn off when it turns off, but immediately return to solid when its completely off with battery blue.

  Hi @ActingDemicky,

  Do you have completely replaced the power adapter, power cord and I tried to plug different?

  Try the procedure described in this document to see if they solve the problem:

  Win 8 and 10: http://support.hp.com/us-en/document/c03513214

  Thank you

• HP Envy 5644: My hp envy 5644 does not install drivers for my laptop

  my HP envy 5644 some drivers will not install and cannot use the eprint button. tried to click on the set up button and accept the terms of use, but he said: "the printer cannot connect to the server...". "I printed the report and the diagnostic results: PASS all except the DNS: confirmed in case of FAILURE. I followed the instructions for the solution indicated on the report but nothing happened.still the same. I have not the scan doctor on my desk since I can not install.part of the software is installed, the portable computer recognizes the printer. I can't turn on the printer web services. tried pressing the eprint icon, turned again, and the fact the educated solution but nothing happened. * use the Wi - Fi

  Hi @CuriousMind,

  Welcome to the HP Forums!

  I see that your HP Envy 5644 will not install the drivers for your Windows 7 laptop. I'm happy to help you!

  To download the scan doctor, see this website, HP print and Scan Doctor.

  Otherwise, I recommend you to go through this guide, a "cannot find the printer ' display the error to the HP ENVY 5640 and DESIRE 5660 e - all - in - one printer series."

  Hope this helps and have a great day!

• I can not open HP support assistant.

  I can not open HP support assistant. Get a message that says hpsf.exe has stopped working.  How can I fix it.

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Adding an SSD on the 2nd Bay in a HP Envy 17-j021nr

  Hello world

  I know there are already a few questions similar to this one, but I just wanted to ask to be completely safe.

  From what I understand, I'm suppose to use the spare part kit 605415-001, but after watching carefully the kit I don't think it comes with the appropriate cable.

  My current HARD drive is connected via an AWM 20624 80 60V tablecloth, just like this picture:

  

  On the circuit where the cable is connected, there are two marked hubs HDD1 and HDD2, the former is used by the current HARD drive.

  Cable 605415-001 kit spare parts looks nothing like the cable that uses the current HARD drive.

  Do I need a different Kit for the HP Envy 17-j021nr? Or I do something wrong?

  Thank you all for your time!

  Christopher

  First of all, let me say very nice post with photos and everything. Very clear question. I am also a model of Envy 17-j0xx with a second empty Bay. I did an image search on google with the part number of the kit that you have published and there indeed a cable that comes out of the SATA adapter and goes to the motherboard which is different from a cable layer right like in your photo, but if you look at the end of this I think that the trick is inserted into HDD2 little marked zif connector. I intend actually get the second kit car here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

• HP Envy 4500: URGENT - HP Envy 4500 does not print with only a black cartridge

  Hello

  My HP Envy 4500 will not be black and white print with just the black cartridge. I want to use the color cartridge, which is almost empty. Result: my pages get printed in a greenish color. I can't select the option "only use black cartridge" in the print option either (it is disabled). I tried to delete the printer and re - install again but it doesn't change anything. I use a Mac with os x 10.6.

  I need to print important documents quickly, so any quick help is more than welcome!

  Thank you

  Gunther

  Use single-cartridge use the HP ENVY 4500 series with only one cartridge.

  Mode single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.

• HP Envy 120 do not print

  My printer HP Envy 120 is not printed correctly.

  The printer accepts the job, pages come out of the printer, but the only thing that appears on the page's hyperlinks. I tried printing from three different computers and printed various documents Microsoft word but its all the same impression.

  Is there something you would suggest that I should try?

  Thank you

  I would try the doctor print and scan to see if it will detect and fix the problem automatically

  Try printing HP and Scan Doctor for Windows

• Some programs do not recognize Windows Media Player on my computer error ' g windows media player is not installed or supported on my computer. "

  I have windows 7 home. I have 12.0.7601.181.50 windows Media Player. Some web sites do not recognize that it is installed on my computer. It does not show on the page add to the abduction as a program that is installed on my computer.  All attributes are turned on. I am currently taking a class and he repeats my windows media player is not installed or supported on my computer.

  A test and don't run like that for long JUST as a quick test, IF this compass program is the only one who can or not 'see' WMP, try turning off your firewall on your PC (not router) just to see if it works OK then.  See - http://technet.microsoft.com/en-us/library/cc766337%28v=WS.10%29.aspx - for instructions via the user interface.

  After testing, you can reactivate the firewall.

  PS - can give you a link to the site so that we can a better idea of the program? or is it internal to your company?

• CD DVD burn CDROM DVDROM BD Blu - ray - disc disc in drive [E:] is not detected or supported

  the disk in drive [E:] is not detected, or supported... running Windows 7. I'm lost, so that everything has been updated. Need pc - 101

  ALL disks are recognized?  Try several from different sources, for example those that you yourself, burned movies DVD commercial and retail of CD of software.  If nothing is found, it is probably time to replace the disc, the laser could be dead.  You can try a CD/DVD cleaning kit before changing the disk if you wish, it can be useful.

• I recently bought 13 elements for Mac OS and can not download N - OS and can not download files NEF RAW taken on my Nikon d5500 has been added. The model is not among those supported by the elements, but the D5300 is, which is almost identical. Is there a

  I recently bought 13 elements for Mac OS and can not download N - OS and can not download files NEF RAW taken on my Nikon d5500 has been added. The model is not among those supported by the elements, but the D5300 is, which is almost identical. Is there a quick fix?

  What is N - OS?

  For the problem of camera raw, every new device has its own raw format, and ACR must be updated to include the latter. Happened yet for the d5500 has been added, so you'll just have to use the Nikon software until Adobe gets the info and releases an updated version of ACR. It is not uncommon to be in your situation, if you buy a camera model that was only a month. You just wait a bit.

• The virtual disk is either corrupt or not a format supported.

  We have a 2008 R2 SP1 VM Datacenter we cannot snapshot.

  A manual snapshot of in the Client vSphere indicates the following in the tasks and events:

  The virtual disk is either corrupt or not a format supported.

  Our NetBackup software is automatic snapshots for VM backups and generates these three errors in the tasks and events:

  Cannot run a snapshot operation
  

  Operation timed out
  

  A general error occurred: VMX protocol error.

  The virtual machine has two virtual disks:

  [vmds-standard: (1) default] outhostname/ourhostname - 000001.vmdk

  [vmds-standard: (1) default] outhostname/outhostname_1 - 000001.vmdk

  Virtual disk files seem to be the usual file names. Instead, they resemble snapshot files or something similar.

  I don't know what is happening. Can anyone help?

  The file names are correct, since there is an active snapshot on the virtual computer. I found a few entries in the log file that we/you can see:

  08:01:25.543 Mar 23: vmx | DICT scsi0:2.deviceType = scsi-disk hard
  08:01:25.543 Mar 23: vmx | DICT scsi0:3.deviceType = scsi-disk hard

  There are some entries of old/orphaned for already deleted virtual disks! However, it should ask the question.

  21:13:06.212 25 March: vmx | In SUMMARY: SnapshotBranch failed: changes, followed by target file already exists (5).

  That's what I think is related to the question. For me, it looks like a problem once with block change tracking, which may have left orphans. What I would do, is first of all to delete all the .ctk files in the folder of the virtual machine on the data store (they will be recreated, only the next incremental/differential backup will take more time). If this is not enough, you can try to disable - at least temporarily - CBT for the virtual machine or remove the virtual machine to inventory, delete the .ctk files and then add it to the inventory...

  André

• cannot save modified photos. receive messages - "Nothing has been imported" "the file or folders selected to import did not contain the supported file type.

  If anyone can help. I use Photoshop elements 13. I can save is no longer modified pictures. receive messages - "Nothing has been imported" "the file or folders selected to import did not contain the supported file type. It began a few weeks ago and I had a friend come fix it only 2 days ago. It took several hours and I lost all the tags I had on more than 10,000 images. Now he has done it again. I'm so angry. I lost a lot of things. I don't want to keep bothering him with that. Help, please.

  Yes, open with editor.

• an' th' is not a language supported on AIR 15

  We have an iOS application that supported multiple languages (en, ko, zh, th) but "th" is not a language supported on AIR 15

  How can we support "th"?

  Bug in the Air - some languages are supported: #3710257 - [new required feature] Add Danish support Feature. It's just 10 seconds sample with patched adt.jar attached