HP Envy 5530: Switch the remote printer

Similar Questions

• 5530 multifunction printe envy: want to set up the remote printer 5530

  Hello

  I have a printer Envy 5530 (new, never used or put in place) and I would like to use it to print remotely from my tablet. My tablet is running Android 4.2.2.

  I DO NOT have a computer and would like to know if there is a way to set up this printer to print remotely from my Tablet without needing to use a computer in the configuration.

  My tablet is currently connected wireless to my router which is not vacant ports Ethernet open if they needed to be able to print (although do if completely wireless would be preferred.)

  Thanks for any help anyone can give me.

  Hello

  You can attach your printer HP Envy 5530 to your existing wireless network, and then

  (a) use Google Play/store to install HP ePrint app on your Android device to print when the TWO are on the same network.

  (b) that your printer is also an ePrint printer. You can send an email to the email address that you want to print (supported file formats) when you are away from home

  Copy the following information to connect to your wireless network

  www.YouTube.com/watch?v=kOUA2t7lJlk

  Kind regards.

• HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

  Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

  Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

  Hello @azvlr,

  Welcome to the Forums of HP Support!

  I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

  Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

  The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

• HP ENVY 5530: reduce the original size when copying

  Hello:

  I use a HP ENVY 5530 EPRINTER, printing, scanning, web copy and want to copy something. Its original size, I would like to narrow it down a bit. I went through the settings and made it very well. HOWEVER, where should I go from there in order to print.  When I go to RESIZE and hit done, the small screen displays 1 of 3, and if I come back at the beginning, I'm right where I started from; THE BEGINNING!

  NEED YOUR HELP.

  Thank you

  Hello

  You can try to scan the document/image rather than copy it.

  Once you have scanned, use the printing software to print the scanned document/image to what size you want. Printing options should be much broader than the copy options.

• HP Envy 5530 leaving streaks when printing

  Wen the use HP desk top it with Win 7 and HP Envy 5530 printer all-in-one sound suddenly started leaving small streaks on my printed pages.  How can I fix it?

  Are the dark streaks WISPs in the areas which should be light, or light streaks in areas that should be dark?  The document here can help solve the problem.

• HP Envy 5530 (5534) is not printing special products

  I'm unable to print documents from an Office such as Microsoft Word or LibreOffice Writer product.
  If I print from Adobe Acrobat reader, a browser, or notepad it works fine.

  Scenario:
  -J' use the print dialog box in Word or Writer and select the correct printer (and have a default limit) and click on 'print '.
  -Action is correctly managed (seems treatment and the printer icon appears in the windows taskbar)
  - Is the thing: no print job is added to the queue of the printer (East remains empty) jobs are in the queue, but are removed directly without being print

  When I print from 'all' another application is the same, but a real print job is then added to the queue of the printer.

  Info:
  -J' have the latest printer drivers installed
  -J' tried to disable the firewall and virus scanner
  -printer is HP Envy 5534 (material is the same as 5530)

  What I tried:

  -When I use 'HP print and scan doctor' and follow the steps are all "fine" and the "test print" button leads to a successful impression.

  -reinstalled / printer driver

  -J' tried both local WiFi and via USB printing

  -When I try to manually add a printer by selecting the port 'HP discovery Port Monitor' I get the error 0x0000007b. Is this related?

  Does anyone have a solution?

  I contacted HP Support and they put a lot of effort to resolve this problem. Together, we spend about three of us and we finally found the cause: my computer has been infected by a virus (led).

  Viruses seem to Nestle between you and your printer even collect printed...

  This virus was not found by Microsoft Security Essentials.

  Because I was running as a user administrator, the faster (and better) way to get rid of the virus was to reinstall my PC.

  You can also try a decent anti-virus.

  After that everything works well again.

  I hope this helps others with the same printing problem.

• HP ENVY 5530: HP ENVY 5530 spits the same judgment of repeatedly w/no 2 prints.

  All in receiving error messages, printer printed sheets releases, but never stops deliver the same 2 leaves.  Lasts for four days. Need to keep in 'off '. between sloppy 'print jobs.  Have plugged and unplugged the two cords, not effective.  Have dusted inside with canned for stuck pieces of paper air, no results.  Old printer for three years.  I suspect the software problem?  Please notify.

  @happynavigator

  Assuming that "printed sheets" are not some sort of mistake / test page to the printer...

  Try:

  Restart the services

  Cancel print jobs in the print queue

  • Stop the Print Spooler Service
  • Delete the files in the folder: C:\Windows\System32\spool\PRINTERS
  • Start the Print Spooler Service

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• ENVY 5530 adjust the clarity/darkness of copy

  I could adjust the lightness/darkness of copies on my old printer PSC 1310, but I can't find how to do this on my 5530 ENVY.

  Tap the 'Copy', then tap 'Settings' (the left most button, at the bottom)

  Lightness/darkness is the third on the first screen of settings

• Want 5530: Printing individual self-adhesive labels using Envy 5530 all-in-one printer

  How to print logo, custom, size self-adhesive labels - with the support on the 5530 LIKE?

  What are the steps? Never printed other than letter size docs.

  Thank you very much.

  Raphael

  Thank you 1 million.

  In fact, simply create a new preset in the new size, adjust the guides on the printer to fit the label and... run away!

  Just in case someone else asks.

• HP Envy 7640: Receives the message "print status interface is not responding" after upgrade to windows 10

  After the upgrade to windows 10 I have to manually delete each message in the queue.  I can print one message and then I have to go into devices and printers and delete this message before I can print another.  I have a wireless internet connection.  I checked the print spooler and it is set to automatic.

  It is an addition to this post:

  Later, after downloading the latest version of the software and reinstall the printer, the problem has been corrected.

  Hi, uninstall the printer software and download the installation software for free using this linkHP.

• HP ENVY 5530 all-in-one: print of Google Drive on a chromebook

  I can print from my emails, but cannot print items in my google reader. On my chromebook, he says it is printing, but does not work.

  Thanks for any help.

  Hello

  Try to follow these instructions to print the contents of your account Google Drive using Google Cloud Print.

  Best.

  1. Open the Chrome browser , then sign in to your Google account.

• HP Envy 5530: Yellow ink not print

  Yellow Ink stopped printing with the Tricolor cartridge; replaced by the new HP cartridge and not yet. Also tricolour ink not detected.

  Tried all the steps HP support, including the persistent page terminals on the cartridge and to the holder. Also reinstalled driver. No change.

  Is this a hardware problem? The printer is only 6 months old and so under warranty, but I buy an Epson if it is!

  All ideas welcome

  Thank you

  6 months and under warranty. Call HP for replacement.

• HP Chomebook 14: Scan HP Envy 5530 to the computer?

  I used to be able to scan to the computer, and then about 4 months ago it does not connect to the printers web address.  I am able to scan to email with no problems.  A little pain the but do for making each page its own document.  I have reset the printer to its default settings and rebuild the network.  It is connected to my google account.  I use a HP 14 Chromebook.

  Here are the details of my printer:

  [Personal information]

  Hello @lhosey,

  Thank you for coming back to us!

  If you are unable to access the built-in Web server (EWS of the printer) by entering the IP address, it seems that there is some kind of firewall or security on your router that is blocking the communication between the devices. Are you using your own personal network at home, or working on a business network?

  I would suggest trying a Reset of network power. We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Try to access the IP address using the browser of Google Chrome on your Chromebook. If he is still unable to see the printer, you may need to contact your Internet service provider.

  You talked to @DocCottle, that you were trying to scan to the computer, do not email. You were using a kind of app for this? (Because Chrome OS isn't a complete operating system, there no drivers available, just curious, if you use a kind of third-party application that is what allows you to scan).

  I look forward to hear from you and work at a resolution of this problem.

  

• HP Envy 5530: Printing stops halfway through on the impressions of page multiple.

  We have two machines Windows 8.1 print wirelessly to a printer Envy 5530 and if we try to print a document of several pages, many applications, the printer stops printing half way a page, not the first, eject this page and does no more than the print job print, but will continue the work next in the queue. I made sure we use the latest version of the HP software and Windows is up to the updates.

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!