HP Envy 5530 leaving streaks when printing

Similar Questions

• HP Envy 5530: HP ENVY 5530 "cannot find the printer"... impossible to see where I am going wrong!

  Hello

  We just put a HP Envy 5530, set up was fine, I tried installing but get the message "cannot find printer" over and over again.

  I tried to download printing HP and Scan doctor but also, it does not find the printer.

  I ran two reports of diagnoses on the printer, everything looks ok, I have an IP address with an IP address that suggest that it has connected wirelessely, the network report said no problems were discovered.

  I tried disabling my firewall, all made once again, still nothing.

  I put the IP address in the address bar, but it does not open!

  I don't seem to have a printer/USB cable witht the printer so I can't tey wireless - I one of them, it was a new purchase?

  I don't really have an idea what to do next, it seems I have a printer connected to the network, your laptop to talk to the network but nothing to talk with each other. I also tried to find the printer with my IPad, but he also could not find a printer.

  Any ideas, im really frustrated

  Thanks in advance

  Hello

  They are on the same Beach, they should be. Now please reset it and try again

  1 reset the printer

  b press settings (wrench),

  (b) press tools then use the arrorw down to access page 2/3,

  (c) touch Restore Factory Defaults - wait a few minutes

  2 reinstall the printer

  (a) you can use the CD, but it will download the file and may take ages to download. Please download the software and the following drivers

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

  (b) turn on the printer,

  (c) right click on the downloaded file and select run as administrator.

  d select Wireless and then follow the instructions on the screen.

  Kind regards.

• HP Envy 5530: Switch the remote printer

  I have a HP Envy 5530 and I was wondering if it was possible to pass on/remote via my iPad/iPhone?  Advice would be greatly appreciated.  Thank you guys.

  Hello

  It is not possible.

  You must power the printer on the power button to be accessible through your network, then only it will appear in your iOS devices.

  Shlomi

• HP Envy 5530 (5534) is not printing special products

  I'm unable to print documents from an Office such as Microsoft Word or LibreOffice Writer product.
  If I print from Adobe Acrobat reader, a browser, or notepad it works fine.

  Scenario:
  -J' use the print dialog box in Word or Writer and select the correct printer (and have a default limit) and click on 'print '.
  -Action is correctly managed (seems treatment and the printer icon appears in the windows taskbar)
  - Is the thing: no print job is added to the queue of the printer (East remains empty) jobs are in the queue, but are removed directly without being print

  When I print from 'all' another application is the same, but a real print job is then added to the queue of the printer.

  Info:
  -J' have the latest printer drivers installed
  -J' tried to disable the firewall and virus scanner
  -printer is HP Envy 5534 (material is the same as 5530)

  What I tried:

  -When I use 'HP print and scan doctor' and follow the steps are all "fine" and the "test print" button leads to a successful impression.

  -reinstalled / printer driver

  -J' tried both local WiFi and via USB printing

  -When I try to manually add a printer by selecting the port 'HP discovery Port Monitor' I get the error 0x0000007b. Is this related?

  Does anyone have a solution?

  I contacted HP Support and they put a lot of effort to resolve this problem. Together, we spend about three of us and we finally found the cause: my computer has been infected by a virus (led).

  Viruses seem to Nestle between you and your printer even collect printed...

  This virus was not found by Microsoft Security Essentials.

  Because I was running as a user administrator, the faster (and better) way to get rid of the virus was to reinstall my PC.

  You can also try a decent anti-virus.

  After that everything works well again.

  I hope this helps others with the same printing problem.

• Want 5530: Printing individual self-adhesive labels using Envy 5530 all-in-one printer

  How to print logo, custom, size self-adhesive labels - with the support on the 5530 LIKE?

  What are the steps? Never printed other than letter size docs.

  Thank you very much.

  Raphael

  Thank you 1 million.

  In fact, simply create a new preset in the new size, adjust the guides on the printer to fit the label and... run away!

  Just in case someone else asks.

• HP ENVY 5530 all-in-one: print of Google Drive on a chromebook

  I can print from my emails, but cannot print items in my google reader. On my chromebook, he says it is printing, but does not work.

  Thanks for any help.

  Hello

  Try to follow these instructions to print the contents of your account Google Drive using Google Cloud Print.

  Best.

  1. Open the Chrome browser , then sign in to your Google account.

• HP Envy 5530: Yellow ink not print

  Yellow Ink stopped printing with the Tricolor cartridge; replaced by the new HP cartridge and not yet. Also tricolour ink not detected.

  Tried all the steps HP support, including the persistent page terminals on the cartridge and to the holder. Also reinstalled driver. No change.

  Is this a hardware problem? The printer is only 6 months old and so under warranty, but I buy an Epson if it is!

  All ideas welcome

  Thank you

  6 months and under warranty. Call HP for replacement.

• HP Envy 5530: Printing stops halfway through on the impressions of page multiple.

  We have two machines Windows 8.1 print wirelessly to a printer Envy 5530 and if we try to print a document of several pages, many applications, the printer stops printing half way a page, not the first, eject this page and does no more than the print job print, but will continue the work next in the queue. I made sure we use the latest version of the HP software and Windows is up to the updates.

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• HP Envy 5530 scans more wireless network home but does not print

  Love my 5530 desire!

  Through our wireless network, it will scan at anything, but it only prints my smartphone and iMac. It will not print laptop Packard Bell with Windows 8 (although it will scan to it).

  Tried to re-install the drivers on the computer laptop etc etc, but, although printer printed initially - it has stopped after a month or two. Are there problems of network with Windows 8?

  Any ideas?

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the icon of 5530 desire within the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• my HP envy 5330 takes forever to print, or not at all

  Hello

  I have a HP Envy 5530, which do not print most of the time. Sometimes it will print but often it will say: it is printing then leave after 10 minutes. Sometimes it will print a half page.

  I set up to connect to the router but have also tried a usb cable, but there is no difference

  Any ideas?

  Thank you

  Jono2

  Please provide the following information if anyone can help including:

  The printer model - done

  Complete and detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Say, download and run printing HP and Scan doctor, what - what?

  http://support.HP.com/us-en/document/c03286146

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!

• HP Envy 5530: connection ipad

  How can I connect my ipad to my HP Envy 5530

  You can print to the printer using the Apple AirPrint solution if want 5530 is set up wireless on your WiFi network and your iPad is also connected to the same WiFi network. See link below to print from devices mobile iOS using AirPrint.
  http://support.HP.com/us-en/document/c02623193#N1175

• Lines every 1/8 inch when printing photo collage.

  Horizontal lines on my photo collage pprints.  The lines are 1/8 inch and appear on the top of page 1/3 of the page. I just bought my HP Envy 5530 all-in-one printer.   I had the same problem with the Photosmart 6510 except the lines were 1/2 inch apart & continues to the bottom of the full page.  both printers work fine for print ordinary & copy. If this problem cannot be solved, I'll have to return the 5530 still under warranty.  I tried all the troubleshooting suggested on the site and as suggested by the representatives via telephone, who do not understand the problem!

  Hello

  Each generation of printers requires a different software. New printers to print HP Photo Creations software. This software should be on the CD that came with the printer or you can download it from the following link:

  http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

  Kind regards.

• How to choose the dpi specific when you scan pictures on printer Envy 5530/5535

  Printer using HP Envy 5530/35 on Mac, using HP Scan software app. When you scan pictures I want as much detail as possible. The only option I have to increase the resolution is to use the 'best '. That scans only at about 200 dpi I think. How can I scan at 300 or 600 dpi?

  Mac, Mavericks, entirely software update HP. Purchase printer less than 3 months ago.

  try to go to Preferences system then printers and scanners.

  on the scan tab, click Open scanner

  with this scanning application, you can select the DPI

  If its does not try to click Preview or view details

• HP student laptop: how to print 6 x 4 & 7 x 5 photos on HP Envy 5530 e printer

  My daughter wants to print 6 x 4, 7 x 5 & A4 photos on photo glossy paper through its 5530 mobile & HP Envy HP student e-all-in-one printer series. Is could someone please advise me how my daughter can do this. Thank you.

  @Garry21

  • Install the full feature software to take advantage of features and options of the printer software.
  • Use a favorite program to open / view the photo > in print preview > Printing Preferences (Options) > adjust the size of the paper, type of media (paper type), selection of the status bar and other options

  Sounds too simple - and it can be as simple as that.

  The printer will be probably best to use HP paper - meet other quality brands can work perfectly, too.  In my case, HP Advanced Photo paper always gave good results.

  One caveat: a lot of printers that provide the photo tray bit limit paper size cannot be used in this sandbox to the size of 4 X 6 inches.  It is not always obvious that it is the case; the tray will sometimes adjust large sizes regardless of this restriction.

  For example, if you want to print on paper, 5 X 7,.

  • Remove the paper usually the main tray >
  • Place the 5 X 7 paper in the main tray - the print down side >
  • Adjust the sliding bar (s) to embrace the paper >
  • Use program > print preview / print preferences to tell the printer on the parameters of work >
  • and printing

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  References and help:

  Printer:

  Printer e-all-in-one HP ENVY 5530

  Full software features - 8.x Windows - Windows 10:

  File name: EN5530_198.exe

  Communicate details

  Exit the: 12 November 2015

  Version 32.3

  Reference:

  Install the full features software - printer

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Restart all
  • Download and Installation
  • Remove the printer software
  • See who and what is on your network

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  The user guide for the 5530 LIKE

  Print Photos - Chapter 3, Page 10

  In the Section How to > Print > Instructions and parameters:

  Creating custom paper sizes

  Print photos (Windows)

  Book - example:

  Photo paper glossy 100-Advanced-HP leaves/4 x 6-in. borderless

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Notes:

  If you can't find the paper size you want in the print preferences paper size list, you can create a custom form (custom size) for your special paper.  The number of parameters available for a custom form is somewhat limited; You can designate at least the size.  Start with such a type of paper (from the list of the available standard types) and the custom form should serve as sufficient results.

  Still available in 8.x Windows, you should find the program in the Windows Photo Viewer.  This is a simple photo montage and a print program that can help to put in place a photo impression basis.  The first time, you can print the picture on plain paper to make sure you get what you expect.

  More help - other programs and print options:

  Print - Programs_and_Methods

  Sections of interest include >

  • Photo Creations for Windows and Mac
  • Printing with the paint - modify Photo shape to fit the paper size
  • Photo printing with Windows for Windows Photo Viewer
  • Whereas the report l / h
  • Printing with paint
  • Printing Documents and Photos 5 X 7

  and

  Printing options

  Article (s):

  Custom paper sizes

  Model custom print preferences

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.