HP ENVY M6 - 1188CA: updated HP ENVY M6 APU?

Similar Questions

• HP ENVY m6 - 1188ca Notebook PC: HP ENVY m6 - Hard Drive short DST check FAILED

  Hi there, I get the following start-up error message.

  HP ENVY m6 - 1188ca Notebook PC

  Short hard drive DST Check: FAILURE

  FAILURE ID: GU71BT-6AA892-XD7X1F-60RK03

  Restoration of the system, cooling system, auto repair, no recovery option seems to work. I get to the screen only and cannot get into Windows.

  Is this a problem of material strictly for some? What are my options and next steps? Laptop went from warranty.

  Thanks in advance for any answers.

  

  Last UPDATED October 19, 2016 - I now get this screen when the laptop is turned on.

  

  New laptops are much more fast and pleasant. If your budget by all means, treat yourself. You could fix your old for around $ 100 may - $50 - $60 for a hard drive and about $40 for a recovery media.

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated

  Computer model: HP Envy Phoenix h9 - 1420t

  OS: Win 8.1 Pro 64-bit

  HP Support Assistant

  Version: 8.3.27.17

  Framework: 12.5.26.37

  Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has successfully completed phase "connect to HP servers", but then fails (x-watch gray instead of green check mark) to complete the remaining steps:

  • Download messages and updates of definition
  • Gathering configuration information
  • Scan your system
  • Preparation of the list of actions

  Any suggestions on arises at work?

  The steps I've tried: uninstallation with Revouninstaller, resettlement, reset

  @troubleshoot411, welcome to the forum.

  I agree with using Revo.  This is my go to app for malware.  When you used Revo, you use the advanced option?  This will not only remove the program from the HARD disk, but it removes remnants of the BIOS.  If this is not the case, this could be the problem.  I suggest to try the advanced option to remove HPSA and shut down the computer.  Then, start and reinstall HPSA here.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP envy 20: someone had problems updating their envy of hp with Windows Windows 8 to 10?

  Someone had hurt update to Windows 10 of Windows 8? I bought my hp envy 20 while pc ome in 2013 and hp said that it is fairly new to encourage the transition I've heard that some of the older ones are not. But I keep if with errors when my computor wants to make updates and he finally gave me the unfortunate blue screen, then finally black screen and would not start. I'm trying to understand why he did it so that I can avoid or help the situation, I am the future when I get it back of fixed neimg. Any thoughts??

  Greetings,

  Someone is probably going to stomp on my answer.

  Stick with the HP operating system factory if you can deal with that.

  HP Envy 20 is not good product number. So I can't review the instructions of your PC.

  I'm guessing that HP does not Win 10 driver support.

  Microsoft is, of course, drop the ball on the provision of the correct drivers for your PC.

  So spend you to Win 10 successfully but a lousy update your PC?

  It might be a bad driver update or a cumulative update.

  You can stop to win 10of the driver updates, but you cannot stop the other updates.

  The grass is not always greener on the other side.

  See you soon!

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• Envy 17 t-j100: ENVY 17 t-j100 games for 5-10 seconds all lag a few minutes/Bios Update issues

  I just bought this laptop rarely used a few days ago.  He had a clean recovery of Windows when I picked it up and I spent a few days in day and to learn to play well together (Leap movement, fingerprint sensor, etc.)  I've updated absolutely everything I could to the latest drivers and finally sat down to play games.

  Here's where my problems began.  I installed Skyrim and Portal 1.  Initially, I put the properties graphic high heat, since that is the recommended setting and tried to play.  The game started quickly and the graphics are superb.  I played for about 10 minutes and the video started trolling and I could hear the shift in the audio as well.  I stop, rebooted and the same thing.  I put the graphic quality for low on both games and still the same problem.

  I read that it is often caused by overheating, so I checked the cooling fans and vents and both are clean.  I also confirmed that all the fans are working.  I also read that this can be resolved by updating the bios.  I tried several times via HP Support Assistant and have so far failed.  It downloads, installs, flashes, restart, picking them up at the old version.  Very frustrating.

  I bought this camera as a desktop replacement that I am hoping to use for the moderate game.  I really hope someone can help me.

  System information:

  HP ENVY 17 Leap Motion SE NB PC

  F1J39AV

  8.1 Windows 64-bit

  Intel Core i7-4702MQ @ 2.20 Ghz

  16 GB of Ram

  NVIDIA GeForce GT 750M 2 GB

  2 TB HARD DRIVE

  I'm running it on current alternative, using the NVIDIA card exclusively and have every setting I can find High Performance value.

  Nope.  Off CoolSense, crank all the settings to ultra, even downloaded the HD texture pack and it works very well.  CoolSense was my problem.  I don't usually use it on a flat surface and I guess CoolSense wobbly.  HWMonitor to verify time and there was a NET improvement of cooling without CoolSense.  Thanks for your time, but this laptop is now shouting through games at high resolution.

• HP ENVY laptop - 15-k112tx: Bios Update HP support assistant takes too long to install. !!!

  I have a Hp Envy-15-k-112tx.
  System SKU-K2N90PA #ACJ

  BIOS Version/Date-Insyde F.34, 19/12/2014
  Name of operating system Microsoft Windows 10 single Home Language
  My Hp support assistant hangs during installation of the UPDATE of the BIOS from HP (Intel processors). I have run several times now, but every time it crashes on installation. How can I update my BIOS?

  Go to your Support and download page & save the BIOS. Then click Run.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-K100-notebook-PC/7234894/model/7407332#Z7_3054ICK0K8UDA0AQC11TA930O2

• HP Envy: Updated, now Fan always on top

  It used to be that if the fan was running upstairs, I closed just a few apps and it would immediately slow down and be almost inaudible.

  Now the fan is always on (and the air coming out is hot enough) even when no apps are open, and the room is 62 degrees.

  I did all the standard things:

  • Updated the BIOS
  • Cleaned all vents
  • Disabled indexing
  • Off many other features
  • Turned Coolsense works

  I have to just live with the extra noise?

  Al
  
  TouchSmart HP Envy 17
  Windows 10 worm 1607

  I went to this page:

  https://www.wintips.org/how-to-fix-Svchost-exe-netsvcs-memory-leak-or-high-CPU-usage-problems

  Finished and disabled the windows update and a few other things, and now the CPU usage dropped by 20 percent to about 2 percent.

  I don't know exactly which thing solved, but now the fan is nice and quiet.

• HP Envy 17 j015eo: fingerprint reader not working after update

  So after I updateded Windows 10 in the last update, my fingerprint no longer works. I tried to download the original driver, it won't work. When I slide my finger over it just keep blinking but if I hold a finger on the flashing stops. But when I try to save a finger in Windows Hello or HP Simplepass, it does not recognize slide me my finger over it.

  @Nicolaj123dk

  System:

  HP ENVY 17-j015eo notebook PC

  Eagle Driver validity sensor:

  File name: sp63418.exe

  (26.2 MB)

  Program HP SimplePass current (up-to-date):

  sp76923 HP SimplePass V8.01.62has 32/64 bit W7 - W10

  Nicolaj123dk wrote:
  

  So after I updateded Windows 10 in the last update, my fingerprint no longer works. I tried to download the original driver, it won't work. When I slide my finger over it just keep blinking but if I hold a finger on the flashing stops. But when I try to save a finger in Windows Hello or HP Simplepass, it does not recognize slide me my finger over it.

  Comment

  • The Eagle sensor recommended is actually suitable for Windows 8.1 (and 8); the driver works in Windows 10.
  • The program supported the series 8 HP SimplePass is evaluated from Windows 7 to Windows 10.

  

  IF you were using previously series 6 HP SimplePass (any version of HP SimplePass 6.x):

  • It is time to move as a result of program series 8 HP SimplePass supported.
  • Even if you have an export of your webcards (Web sites / passwords) of this older version of SimplePass, you can use file .tsd (import) series 6 in series 8 HP SimplePass.  The two sets of program are NOT compatible.  There is no program of conversion of encryption between the two programs.
  • When you switch to the supported HP SimplePass version, you must create a new database of your Web sites / passwords.   This means you must create all new connections to fingerprints.
  • The new export file "webcard" is called the vault to series 8 HP SimplePass program.  The suffix of the file is ".opi".  The export process is similar to the old SimplePass program; you export your vault entries from within the SimplePass program to the file .opi.  The file is encrypted - keep - the in a safe place.

  

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Before performing any advice given here (or unfortunately), verify that you can connect to your computer using your password.

  

  Optional:

  Create a style admin with a password for the local account that you can use to connect to your computer if the need arise (everything happens on the side).

  See the Section:

  • Shelter account -Solutions for access, account administrative secondary

  

  In the document...

  Procedure - updated / (install HP SimplePass Re)

  Start by creating a Restore Point

  See Section

  1. Create Restore Point

  

  If you have installed any version 6 HP SimplePass

  • Uninstall the program from HP SimplePass version 6.x of programs and features >
  • Restart the computer and log in

  

  If the installed validity sensor driver is courses (as recommended):

  1. Uninstall your driver Validity Sensor in the Device Manager (do not remove) >
  2. Restart the computer to enable the driver to reinstall

  See Section

  1. Reinstall the existing fingerprint driver
     • Option 3 is to install the driver in Device Manager
       • Method 1: Reinstall the existing driver

  --------------   OR ----------------

  If the installed validity sensor driver is exceeded (old):

  1. Download driver validity Eagle
  2. Uninstall the existing driver from the Device Manager AND check the box to delete the driver >
  3. Close all programs >
  4. Shut down the computer > seconds >
  5. Start the computer and log on >
  6. Install the downloaded driver

  See Section

  1. Reinstall the fingerprint driver
     • Option 3D remove the driver from the Device Manager and install

  

  Then, check / adjust the settings to logon Windows 10 (fingerprints).

  See Section

  • Order of events is important
    • Logon Windows 10- Connection options

  

  If you have not already done after the Windows logon is (still) works, it's time to install HP SimplePass.

  See Section

  1. (Re) Install HP SimplePass software
     • Install the software Series 8 HP SimplePass

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• HP ENVY 700-029eb desktop PC. Update to Windows not sure 8.1?

  Hello world

  HP ENVY 700-029eb-computer for office
  Model: E3H39EA

  Windows 8

  A question related to the following message on my HP computer:
  -----------------------------
  HP has not tested this PC with Windows 8.1
  For this reason, HP is unable to update providence instructions or Windows 8.1 drivers.
  You can now lose stability and basic functionality if you try to update your system.
  -----------------------------

  A Windows 8.1 update could make the System unstable, so the message of HP.

  But my computer is always busy preparing the update and guard asks me to do the 8.1 update.

  So can I install Windows 8.1 safely on this computer? Or how to turn off the update?

  We appreciate your comments and advice.

  GuyterB1964, welcome to the forum.

  I do not understand these messages.  Here is the download page for software and driver for the computer.  As you can see, all the drivers for win 8.1 are listed.  They would not list them as much as they have not been tested.  I see no reason not to do the update.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY notebook: Support assistant - unable to check updates

  HP Support Assistant does not work correctly. Try looking for updates/messages, it connects to the HP Server but then goes no further. I find myself with the following:

  

  I've deleted and reinstalled, but it makes no difference.

  (Interestingly, the HP support site is not recognizing my phone either on the option "identify now".)

  Laptop HP ENVY - 15-ah150na (ENERGY STAR)

  SN - [personal information]

  PN - N7H24EA #ABU

  Windows 10, 64-bit.

  Since there are about 3 hours, the laptop in question crashed and is now stuck in a loop of startup repair. It seems that HP Support Assistant is currently the least of my worries.

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.