HP Envy to current continuous?

Similar Questions

• need suggestions on the way to a position on a motor control with current continuous

  Hi, I'm a newbie with labview

  I'm doing a position on current motor control continuous. I use a USB 6259 to generate an output voltage and acquire the angular position of a coder.

  I enclose my system of proaction

  How can I transform into a feedback system, with a given reference signal?

  Thank you

  The "cascade dc motor speed regulator" example uses the Control Design and Simulation Module, and it is thought to control a motor which is simulated. Since you have to acquire data from a real system the standard while loop is correct.

  With respect to the operation of PID control, you can take a look at the following examples:

  Control input PID Counter

  PID Control-single channel

  PID Control-Advanced

• Closed the motor current continuous Brushless PM and the loop speed control of Induction motor

  I need to implement the speed control of motors, asynchronous Motors PM Brushless DC and several other algorithms of cardiac control using LabView. It will take me 6-channel PWM and 6-channel 12 bit ADC, and a control movement of VI. Ideally a DSP would do the trick, but I would like to take advantage of the user-friendly interface of the LabView program to reduce development time. Please suggest the best hardware solution.

  Vaszzy,

  the SCB-68 is just a connection for the 7842R block and it does not provide a conditioning of signals. You can use digital IO of the RIO card to generate PWM signals. The 7842R provides converters a/d for voltage measurements. To measure the current you will need high precision resistors to convert current into voltage.

  Kind regards

  Jochen

• 23 - c010xt envy: internal speakers continue to work after plugging in the speakers external or headphones

  I got this computer for years with no problems. I use external speakers connected to the audio jack on the back. Once you plug in external speakers (or headphones), the internal speakers are disabled as expected.

  Last night my PC automatically installed the anniversary of Windows Update (update feature Windows 10, 1607 version). After this update, now my two internal speakers and external speakers are working at the same time! I can't turn off the internal speakers without also turning off my external speakers. The volume affects both sets of speakers as well. I tried to disable audio and re-clearance but that did not help.

  How can I go back to my original audio behavior where connect speakers external (or headphones) to the rear Socket 3.5 mm would automatically turn off the internal speakers? Thank you.

  Diameter of thank you!

  I couldn't select no other devices in reading or recording tab becuse it is said that they are "not connected". Update drivers, said that later I have already.

  But when I checked the other post, he fixed it! Now I get only audio speakers again... just like before and how it was supposed to be. Thanks again.

  Windows 10. So I did some research on a Microsoft support forum and I found this solution:

  • Access the device driver software manager - right click on IDT high definition audio CODEC - updated.
  • Choose "Browse my computer for driver software" - choose "Let Me pick from a list of drivers for devices on my computer.
  • Select "High Definition Audio Device" (not IDT high def...)  This is important) and click Next. You get a warning message but answer 'yes '.
  • Once windows have updated driver software, try to play the audio again and check.

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• Saving data during monitoring continues to supply

  Hello

  I started to learn the LabView recently and I worked on this small code. The idea is to monitor the power supply voltage and data current and Records in a spreadsheet when there is a change in voltage/current continuous playback or change voltage by the user.

  I used a structure of the event to add the worksheet if there is a change in the value of voltage/current. But through execution to highlight, I noticed that the code continues to monitor the voltage/current and therefore does not re-iterate until the voltage is changed manually by the user. I tried to use the case out of the while loop structure, but this leads to other errors.

  Any information on this would be appreciated.

  Thank you for your time.

  Put the writing to the file inside the structure of the event.  You will also want to put a value of timeout for your structure of the event.

  DataFlow 101: A loop cannot iterate until all the code inside it is complete.  This structure of the event is sitting there and you wait to change the frequency, or press the stop button.  In the meantime, nothing else in this loop can run again.

• HP ENVY M6 - 1188CA: updated HP ENVY M6 APU?

  Hi guys,.

  I am new to the Forum and I was wondering if someone could help me.

  What would be the highest spec APU I could upgrade my laptop for?

  model: M6 - 1188CA ENVY

  Current APU: AMD A10 4600 M

  Socket: FP2 (827)

  I can provide more information if necessary.

  Thank you

  There is a single motherboard offered for all having the same socket.

  http://www.Amazon.com/HP-713548-001-quad-core-accelerated-processing/DP/B00GBCOQXS

  http://www.TomsHardware.com/reviews/A10-4600m-Trinity-Piledriver, 3202 - 5.html

  The A10 - 4600M uses the same socket as the A10 - 5750M FS1r2 so if you have the A10 - 4600M, you can install the A10 - 5750M

• Laptop computer with two hard disk slots

  One of the portable series Envy 17 current have two hard disk slots?  I currently have a Pavilion DV8 that has this and I really like it.

  Yes, they do the end superior versions have a disk in it and basic editions have the empty Bay
  The new 2015 envy 17 t

• CanOPEN OR 8472

  Hello

  I'm trying to implement a communication between a motor current continuous (not OR) and LabVIEW.
  PC (LabVIEW)-> NOR-8472 (USB - CAN)-> DC MOTOR (CanOPEN)
  This is my setup
  I tried this example, the example of CanOPEN SDO for USB CAN

  https://decibel.NI.com/content/docs/doc-

  But I am not able to write anything... You guys have advice for beginners?

  My second question, when I have a functional communication between LabVIEW and motor continuous.
  How can I control using LAbVIEW?
  I just need you to order:
  -Start
  -Stop
  -Reverse

  Thank you
  andechr

  andechr wrote:

  I'm not able to save this example, every time that his end he down and restart I have to change the interface, index, etc...

  When I tried to build my own I cannot find pallets for SDO READ, WRITE SDO etc.

  You set the default control values and save the VI?  Do you have to set the values of control at startup?

  This example looks like it uses a modified version of this library.

  http://www.NI.com/example/30873/en/

  I've never used this library and have no idea how it may have changed.  If you have any questions on this example, you'll probably want to contact the developer, they don't have give a lot of information there.

• Auto boot PXI DMM

  I use NI PXI DMM 4065/4071/4072 with MXI controller to measure the current continuous on my device.

  I am very sure that PXI DMM are not initialized because the device could not be activated at PC startup

  unless I opened the DMM front panel and cofigure software current continuous.

  Is it possible to auto initialize PXI DMM when I start computer, as do the autonomous way instruments?

  Thanks in advance.

  Adam

  Hi Adam,.

  I think you could do this by building
  a VI to set up your DMM and then placing the VI (selected to run
  When opened or configured as an executable) in the startup directory
  (C:\Documents and Settings\All Users\Menu Menu\Programs\Startup). Hope
  This is useful!

• Water spilled

  A few hours ago I unplugged spilled some water on my desktop computer. He fell, and some of them got on the device on my computer. I charge my iPod when it is loaded, so the flap thing that opens has been exposed to water. I quickly removed all the wires ect. and I tried to put my computer to empty the water droplets, with what he could have come into contact. It would be not much, except that I could have sworn I heard a current continuous clicking noise. That's what worries me, and why I need help as soon as POSSIBLE. HP Pavilion a6720f is my model of computer for more details. Will you please help and give me advice and thank you!

  Open upward and see if she looks like any water obtained in the case (how he leans, exactly?  On, above, to the side?).  And can you tell if the clicking sound comes from the front USB ports?  How are you computer savy?  Can you disconnect the front USB ports of the motherboard and see if it goes away?

• ACER ASPIRE E15 E5 - 571G does not charge when you play.

  Acer aspire e15 e5 - 571 g. When I play games with the plugin from HQ. It suddenly stopped charging. Power and charge LED flashing LIGHT. and when I try to play without battery only HQ of the laptop is suddenly shutsdown. but when normal im use fees normally. Please, someone knows how to solve this problem.

  It is not do immediately, but after you've played for a while right?

  You use a lot of battery power and charger heat when it loads at full power

  For a long time. As it is too hot it starts decrease amount of current continuous puts it.

  What you see is the default of shipper. You must find a way of cooling of the device when you play for a long time. You can also get a new charger. It wouldn't surprise me if that one has already suffered some damage. Not getting does not load can also damage the laptop.

• Control of heating/cooling (Peltier) in DC (not PWM)

  I am trying to set up a system to control heater / cooler Peltier element like this:

  +/-5V @ 1. 25A

  With the help of current continuous (through a PID controller), not a PWM.

  I am considering using CRIO or PXI platforms.

  -The CRIO, I found the motion controller 9505, but I'm not sure I can drive to DC.

  -On PXI system, I found this 4110 food, but it seems to be a (crazy) overkill solution for the problem.

  I could even include a small amplifier in the output of an AO module, but I wanted to avoid adding external elements to my solution of NOR.

  Can anyone advice me on the ebest way to do using CRIO?

  I'm sorry for the confusion. What you need for a stand-alone cRIO-system:

  1 cRIO chassis

  2 cRIO controller

  3. analog or a NOR-9505

  You can control the NI 9505 - by a PWM signal, you can't drive to a domain controller. If I look at your needs posted, I wouldn't use CompactRIO.

  You can use the PXI system. Then you will have an industrial pc with again a output analog credits in combination with an amplifier. If you want a clean system, it will be possible to use the programmable power supply. With the PXI-4110, you have the possibility to combine channels for voltage/current higher (up to 2 MPa). A problem can be speed, please consult the manual if the speed is applicable:

  http://www.NI.com/PDF/manuals/371635e.PDF

  If a system is not a problem, I will go for a compactDAQ, USB or PCI-solution.

  Kind regards Casper

• Venue 11 Pro system freeze when AC is unplugged

  I understand that this is a troubled unit and is since the liberation. I decided to take the risk anyway because the updates were frequent for this device. I got a unit i5-4300y I received yesterday. The following occur in the order:

  Starting for the first time the charger (batt was dead).

  Ran Windows updates and went to work.

  Returned to the House. Charger unplugged for awhile. Played around with the installation of Office on current continuous.

  Plugged AC and decided to update the recommended drivers and BIOS to the latest version A12 (unit come with A11).

  Finish all updates of driver/firmware and unplugged the charger. System froze. Tried twice and probably 6 times more with constant reboots. Frost occurs within 3 seconds after power is disconnected.

  Go into CS mode and hit the power button to get back to connect to the screen are responsive. Once my account user loads, about 2-3 seconds later system crashes. Repeat with the AC, runs almost perfect.

  Awesome, I had a hybrid/portable tablet that runs on a charger only.

  I guess I overfeed prematurely into the hype of the horror stories and finally stumbled upon the solution.

  Intel HD Graphics display update being disabled on battery seems to have resolved.

• UP2414Q, stuck at 30 Hz, HDMI double 1920 x 2160 tiles unspecified

  Any version/revision of this monitor has an OHS meter that does not rely on daisy chaining for the operation of 4k60Hz DP? I was lucky to suffer A00 of Nov13 for over a year and is about to put it where it belongs - in the tip. The geniuses at Dell support offer to replace it with the same model where I told them don't not worry because even if he solved the curriculum vitae of sleep problems. Questions of support and compatibility 3D app is quite different from Pandora's box. My disappointment with the guarantee 5 years in option is that they refuse to replace the monitor with something else in the range and I am faced with a return/refund now. My other question from a marketing point of view is that he has been never announced to be detected as two 1920 x 2160 for 60 Hz operation screens and the resultant capacity of use which offered this limited mode. I am almost tempted to insert the history of my case here I have on email, but will not go there immediately.

  The Land Down Under, the battle and crab @ 30 Hz continues

  Each single 4 k/UHD monitor that I know at this moment there doing UHD 60 Hz by DP STD at this time. As far as I know, there were no UHD / 4 k 60 Hz scalers so everything had to be driven by the MST.

  As far as I know, all revisions of UP2414Q are basically the same monitor and not with any new 1.3 HDMI 2.0 RFP Measurer or or anything so I'm sure it's STD for 60 Hz only.

  From what I've seen on my Windows 7 + box GeoForce STD UHD 60 Hz seems to work pretty well. I also have the UP2414Q A00. And here I get the weird screen split thing or something else (60 Hz UHD is VERY sensitive to the display port cable, Accell cables better seem to work and if you must use an adapter or extension, you must be very careful because far most combinations will fail or be erratic at best), but 95% of the time just say things to try a different connector and then say things back to the good a set and it takes just a few seconds.

  I ran all my games fine on it.
  And it was beyond awesome to see/change photos or anything web or text.

  Actually, the uP2414Q uses a method of current continuous of high-end to brighten and darken the backlight LED Go - r and does not use PWM at low prices, as do most of the monitors backlit LED.

  Windows Vista seems a little longer at times and is a little more likely to throw himself into a weird state of monitor.