HP G62 fan not working not not :/

Similar Questions

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!

• My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

  Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

  When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

  I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you
  Also, either by the way, if this is in the wrong forum topic, please let me know.

  If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.

  • 1

    Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."

  • 2

    Double-click "Network adapters", then right-click on your network device. Click 'properties '.

  • Sponsored links

    • Analysis software of CAN

      Economic and powerful CAN bus analysis and diagnostic software.

  www.CANCapture.com

• 3

  Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.

• 4

  Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

• 5

  Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.

• 6

  Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

• HP pavilion 7-3060us: Dv7-3060us fans of work but does not come

  There is nothing else than the fans of work! To top it off, NOW the adapter is very hot! I have had this since 2010 and it is still aesthetically beautiful shaped. Wish that the bowels were!

  Thank you

  SherriBeans

  ACK! I can't find the SOLUTION of AS TAKE PLACE!

• Computer laptop 15-f039wm: not fan not turn only at starup seconds, laptop is NEW

  I recently got a laptop Hp 15-f039wm. I saw on the updates of the site of support for the many more advanced BIOS, which brings the plant and downloaded and upgraded. Now the microphone fan runs only a few moments to turn on and no more runs to reach room temperature and with success just before the update of the BIOS. It is a bug in the BIOS or head surprising fan was less than 72 hours of total use. Could someone help me?

  Cool meanings applies not for this product

  Speed of the fan (not the HP software) detect the sensor into the motherboard for laptop

  I can't go back in time and stay away from the Bios Update and downgrade impossible (al at least for me)

  Using the maintenance and maintenance guide you gave me, opened my laptop and remove the internal reset cmos battery and short circuit between the poles of the socket. I don't know that it could be, but I can say that the cooling fan is working normally now.

• Fans not correctly detect when you present to the RPM

  Why my 13 "2015 MB Pro fan not totally crank when the cpu temperature is like 100ᴼ? For example my CPU Core 1 is 80ᴼC and my Core 2 CPU is 100ᴼC, my GPU Core even 78ᴼC yet the rest fan 1300 rpm, whereas at this stage at 4000-6000 RPM.

  Is it because I have iStat Menus active? I put rules fan on this OFF application preference so he shouldn't meddle with the fan in addition to giving my sound status.

  I also wonder, Google Chrome would heat my laptop for the h

  Check your MacBook Pro with Apple Hardware Test if thermal sensor is something wrong.

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• C.P.U fan not detected at boot

  When I turn on my desktop, it says cpu fan not detected & the bottom 'F1 boot' button appears after pressing on which I can log on, I had windows xp on my computer.

  Please tell me how to fix this error...

  Hello.

  Open your computer case and check the fan I have well connected to the motherboard, and it is infact turns when you turn on the computer.

• fan not detected

  HP Z800 workstation

  Windows 7 Professional

  error 511 and before error 512 chassis and CPU fan not detected

  It is still in warranty?

  This error message is usually an indicator of a fan or vent. I recommend that you do not use the PC, unless you have checked that the fan is indeed running. If it runs and you still have this error message fan needs to be replaced with a new one.

  If you use your PC with a fan that is not operational, then the CPU will become non-operational for still some time.

• Problem: The computer is too slow, that I just replaced battery & fan always working like crazy!

  I just replaced battery & fan always working like crazy

  

  
  

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-07-02 14:25:40

  Download EtreCheck from https://etrecheck.com

  Time 03:08

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 5

  1 CPU 2.53 GHz Intel Core 2 Duo: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 14

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Stuff (disk0s2) / Volumes/stuff: 50,00 (GB 49,84 free)

  computoras (disk0s3) /: 199,07 (Go 135,23 free)

  Recovery HD (disk0s4) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Configuration files: ⓘ

  / etc/hosts - number: 20

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 164 tasks Apple

  [operation] 66 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 164 tasks Apple

  [operation] 79 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-30) [Support]

  User launch officers: ⓘ

  [loading] com.google.keystone.agent.plist (2016-06-30) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.103392

  [ongoing] com.google.Chrome.83552

  [loading] 407 tasks Apple

  [operation] 171 tasks Apple

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-05-05)

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-06-30) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-05)

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  0% kernel_task

  0% fontd

  0% systemstatsd

  0% Google Chrome Helper (9)

  0% askpermissiond

  Top of page process of memory: ⓘ

  1.14 GB Google Chrome Helper (9)

  582 MB mdworker (15)

  525 MB kernel_task

  213 MB Google Chrome

  Finder 147 MB

  Virtual memory information: ⓘ

  1.40 GB of free RAM

  6.85 GB RAM (1.45 GB being cached) used

  Used Swap 0 B

  Diagnostic information: ⓘ

  2 July 2016, 14:16:17 test - passed

  July 2, 2016, 02:12:33 /Library/Logs/DiagnosticReports/rpcsvchost_2016-07-02-021233_[redacted].cpu_res ource.diag [details]

  / usr/libexec/rpcsvchost

  July 1, 2016, 20:11:19 /Library/Logs/DiagnosticReports/rpcsvchost_2016-07-01-201119_[redacted].cpu_res ource.diag [details]

  June 30, 2016, 22:06:05 ~/Library/Logs/DiagnosticReports/Adobe Photoshop CC_2016-06-30-220605_ [redacted] .crash

  com.adobe.Photoshop - Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC

  June 30, 2016, 22:05:04 / Library/Logs/DiagnosticReports/Adobe Photoshop CC_2016-06-30-220504_ [redacted] .hang

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Tecra S3-130: why fan still working

  Hello

  The fan is too loud on my laptop Tecra S3-130, because it doesn't always work, never stops. I tried the settings in the properties "Toshiba Power Saver", but after changing anything that the fan starts working again in a few seconds, despite the ACPI temperature is 46 degrees Celsius only, not much higher. This fan of work is always very disturbing.

  Thanks for any advice in advance.

  Kazi

  Hello

  The temperature is 46 degrees Celsius, only because the fan works properly. If the fan doesn't run the temperature climbs. I put t know how you use your device, but if you are working with programs of high performance fans should run because of high utilization of the processor and overheating problems. In addition if cooling method is set for maximum Performance the cooling fans work up.

• 13 yoga fans stopped working

  Today in my Yoga fans stopped working. Anyone know what could be the problem and how to make them work again. My Yoga is now warm enough. Some bios settings? Something is reset in Windows? I tried reset bios and windows several times, but the fans never start. They are completely dead.

  Problem solved. Restarting windows, the default settings in the bios, the bios options for managing thermal, flashing the bios did not help. But dry battery and restarting of yoga has helped

• HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

  Basics:

  HP Pavilion dv5237cl

  Windows XP SP3 32 bit

  PCMCIA SATA card

  1 TB WD Scorpio blue HARD drive

  Computer laptop with 200mm fan cooling pad

  Some USB devices

  Latest drivers and BIOS

  Note: This problem also occurs with Windows 8.

  For the last year my HP Pavilion dv5237cl turned off because of the fan does not work.  I have never seen the term "Thermal event" displayed prior to or on restart.  Usually just abruptly, he died.   I also saw a few BSOD that are not very descriptive to pointing to what the cause was and may be not related.  The laptop usually just stops working and goes out, maybe once every couple of days if it is caught in time.  I HAV been using a Defragmenter memory to help as appropriate the BSOD were due to low memory resources.  I am tracking the temperature of the CPU and have noticed that it is high, when the fan is not working.  I saw up to 85 C and I'm not sure but think that the laptop stops at 100 ° C.  The fan is usually always go at least to a low hum.  Usually, on startup, I get a strong burst of activity fan and if this isn't the case I'm clued in to a fan, not to exploit the condition.

  If I take a PIN regularly and carefully stitch it through the opening in the fan and cause rotate the blades of the fan, the fan will usually start working.  It sometimes takes a few tries.  I noticed the fan poll as it is sometimes wobbling and resembling a noise of ball bearing, but I think it is also maybe a hinged fan.  Some hopping may be due to the time that I used the pin code.  Fan usually settled in a low purr and lately with some ball light bering sound, maybe just wobble.  If I'm not there when the fan stops working or do not notice to try to remedy with a PIN, then the laptop stops due to excessive heat.

  Things I've tried or thought of trying:

  -J' I used canned and out air / blow accumulated debri from inside the vacuum cleaner to suck up and cleaned the vents.

  -J' I add the cooler that keeps time less around 5 c.  The laptop temperature was 55 to 62 C this winter.

  -Install the latest drivers and BIOS.

  -Tried to use Windows 8.

  -J' bought a replacement fan but did not want to disassemble the laptop to install it and also not be

  not know if it is really a material fan or a control sensor or other hardware problem or software problem.

  Thanks in advance.  Help to solve this problem would be appreciated.

  I understand that your laptop stops due to overheating.

  Given the behavior and how the fan no longer works and must be "started" once again, this does not sound like a fan failure.  Page 5-60 of this guide details the process of replacing the fan and the heatsink in Notepad.  If this is something you'd rather not do it yourself, you could contact a local PC shop for the fan and the heat sink replaced.

• Can I force my fans to work faster?

  I have HP d530 and 2 ordinary fans attached to my motherboard. Is it possible to make my fans to work at full speed or at least 80% of it? There is no option in the BIOS and my motherboard does not support the fan speed.

  Thank you!

  On HP computers, it is impossible to make the fan runs faster because you do not have the ability to control the