HP Jet 7 with Battery Charge indicator 10 Win cannot be depended on

My 7 renovated itself stream upgrade with Windows 10 success and (thanks to the assistance of others in this community), I updated some drivers and resolved a problem with a screen 'reversed '. There is a significant problem however sound persist and it is that the Windows 10 battery State of Charge indicator does not seem to be reliable.

For example, I plugged the (from the box with the Tablet), charger and cable in when tablets charge has been showing that 80% and at first the icon has changed to show a plug is attached to the battery, but the expression to the right of the battery said it wasn't loading. Then I unplugged the charger and re plugged in there, that changed things to as they should be, but after a while, the prosecution has built up to 98% and 99% where it remained for some time saying there was 2 hours and 6 minutes until this that fully charged - really? It takes 2 hours and 6 minutes to charge this battery its final 1%?

Anyone know what is happening here? I unplugged the charger at this stage, as I had finished it with the Tablet and I stopped it from within Windows. I was worried about possible damage to the battery of overload it.

Yes, I have installed the NVA HP Support Assistant 8.0.29.6 on my 7 stream but a couple of days, that it has not detected any drivers that are in need of an update. My data flow model is 5701ng and offers for this model may have differed from just the 5701 (especially in regards to Windows 10 where only the driver Support Assistant and Accellerometer has been offered at that time here). I see now that all the drivers are available for both models.

Therefore, I took a bet a couple of days and installed all the other drivers Windows 8.1 with no difference to this problem. This morning I checked the version of BIOS on this tablet to find it as F06. The most recent version being F0E I've updated the BIOS and THIS seems to have fixed things--or the less made things much better in this regard. This time, when he got 99% of fees, 10 Windows said there was about 6 minutes of charge left go - much more accurate than more than 2 hours! I now view THIS issue to be closed thanks to the update of the BIOS. Thanks for the 'index' it would have been just a few hours after I made the upgrade.

Tags: HP Tablets

Similar Questions

  • RX100 battery charge indicator

    New battery for camera (RX100) charge indicator light does not illuminate. I don't think that the battery is charging.

    Does anyone else have this problem.

    Please, check the following:

    1. Check if the battery is properly inserted in the device.
    2. Verify that the AC adapter and USB cable is correctly plugged into their respective ports.
    3. Check to see if the charging light is illuminating. The charge indicator turns orange if it is supported; If the battery is fully charged, the charge indicator does not illuminate.
    4. Try to turn on the camera.
    5. If the camera does not light, try to reload the camera using a USB port on your computer. If so, there may be a problem with the power adapter supplied.
    6. Try again with another USB charge cable. A similar cable is used by other devices (e.g. smartphones) if the cost of the camera, there may be a problem with the supplied USB cable.
    7. If possible, try another battery. If the second battery charge, then it may be a problem with the supplied battery.

    If my post answered your question, please mark it as "accept as a Solution.

  • Satellite L40 - strange problem with battery LED indicator

    Hello

    I have Satellite L40 - 18w and I have a problem. When the battery is low or that he is in charge of the led is orange, but when it is fully charged there is no led indicator. Even if I turn it on, there is no light and if I check the power connection options AC adapter is recognized. Operating system is Windows XP PRO SP2. I tried to find the Toshiba Power Saver, but it seems that he can't stand L40.

    Would it be a hardware or a software problem?
    Thank you in advance for your help!

    I had the same problem.
    Remove and install back the battery.

  • BlackBerry Smartphones battery charge indicator - torch

    Hi, is there an indicator that shows when the torch is in charge and full charge.

    Thank you

    The only indicator is the small battery on the top icon on the left.  When loading, it will show a lightning bolt through it and the charge level will be Visual, that is to say very little, half, three quarters, etc.

    You can also download free apps in AppWorld that will show you exactly how the battery is either 42%, 98%, etc..

  • Second battery charge no more than 29% on Portege R200

    Hello

    I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

    I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

    Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

    Thank you much in advance.

    Hello

    Looks like a malfunction of the battery to the battery performance and life is limited
    After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

    I think that you should simply replace the battery with a new and check if it helps to solve your problem!

    See you soon

  • I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

  • Help with Apple battery charger?

    Because of my Apple Magic mouse, which need spare batteries, at least once every 25 days and my Belkin YourType keyboard requiring spare batteries every day, I bought the Apple Best Buy battery charger as it offers is more the Apple store online. How will I know when the device is finished loading? Best Buy reviewers talk about a sense of light orange blinking battery is defective. I can't say when the charger is finished loading. No it fires? He flashes? It emits beep? Best shopping site only mentions that it reduces the amount of energy it draws when it finishes loading. I want to know when it is finished loading. Everyone go through Duracell batteries in their Magic Mouse in less than 25 days?

    Hello Rebekah

    I used a charger Apple in recent years.   Plugged in to the mains and batteries, the charger will immediately return orrange and will stay like that until the batteries are completely charged.   At this time there the little light turns green and the battery themselvesz will feel warm to the touch.   When they are charged fees to be held for a few weeks, is slowly diminishing.   As the batteries cool, the light turns off, but the batteries themselves will remain loaded.   Use a battery as a final control power indicator.

    If you don't get an orange at first, chances are your batteries are not long enough to complete the + and - sign.   Real Duracell rarely have this problem.   Evade about to see if it makes a difference, but don't be tempted to use aluminum foil packing to compensate for the length; test another battery.

  • Seeing orange blinking after that stop with the charger connected.

    Hello

    I'm new here and I have the following problem.

    Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

    The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

    To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

    Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

    In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

    To describe the problem even once:

    Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
    If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
    Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

    I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

    Because I travel a lot, I love the little thing but I got frustrated at the moment.

    It would be great if I'm right, and someone already had this thing resolved!
    THX advance for any help!

    Peter

    Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

    I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
    Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

    I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

    Let's see what the other members of the forum think problem described.

  • HP 10 G2: Do not get the battery charge icon

    Just got a new Tablet 10 2 HP and tried to charge the battery for the first time. Online user manual deduces that the Tablet is not on to load. So, I'm not turn it on. The USB cable is connected with the Tablet off the coast.

    According to the user manual, when I plug in the USB cable I should get a small icon of recharge of the batteries in the upper right corner of the screen, but I did not. The screen remained black for nearly 30 seconds, and then a large battery icon displayed in the middle of the screen, indicating approximately 56% of the fees. This large battery icon remained on the screen for about 10 seconds and then the screen went black again. After a little experimentation, I discovered that I can get the large battery icon to display on the screen momentarily by briefly pressing the power button. When I type the swtich the large battery icon appears for about 10 seconds and it shows the current percentage of charge.

    It would be nice to get the small charging of the battery icon in the upper corner of the screen just to know that the Tablet is load... rather than having to hit the button on / off whenever I want to update load. Is it possible to get the low battery charge icon or is that determined by the version of Lollipop? My Tablet uses Lollipop 5.0.

    Any help would be greatly appreciated. TIA.

    Jack

    Each Android HP Tablet I belong to, or borrowed (as part of their program of experts) has not lost any charge the battery by displaying an indication of charge "all the time".

    Looks like your tablet is behaving normally.  State of charge is displayed when you ask.

    WyreNut

  • Satellite C650 problem battery charge.

    Hello

    I have a problem with my charge battery.
    Windows system sees the battery and shows that the power supply is connected, but it also gives the message that the battery is not supported.

    Led indicating that the battery is charging does not illuminate. In order to charge my battery I have to disable notebook, unplugged my power supply, remove the battery and place it again once and after that my battery is being charged.

    My question is what is the problem?
    Would be - this defect battery or motherboard?

    Thanks for your help
    SzAkaL

    > My question is what is the problem?
    > Could it be the battery or the failure of the motherboard?

    Hard to say. First of all I recommend you check the version of the BIOS.
    Do not forget that your BIOS is up to date.

    But have you noticed this problem since the first day of use?
    Theoretically, the battery must be detected even if the battery is dead so I m wondering why the battery led is not ON. If the battery could be charged, the indicator must light up orange. If the battery is fully charged, the indicator should switch to blue.

    In any case, I think that you cannot run a few test because you don t have important and necessary tools, I think that the new battery should be tested with Notepad and if this would not solve the problem, the motherboard must be tested also.

  • X120e Battery Charge problem

    Hello

    I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

    So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

    I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

  • virus battery charge?

    I have problem is preventing the included loaded on my laptop!
     
     
     
    Once out of the low power supply indicator of battery warning 7% armel remaining battery charge one or two seconds
     
    Replacing the battery does not solve the problem!
     
    AN INTRESTING OBSERVATION VERRY!
     
    I install and run some software securituy from my internet provider.  While the software did his thing, start and stop services, I noticed something intresting...
     
    My battery has been recharged very well! I removed the power and battery were reported @ 100% and give off very well for 30 min.  Once the software is the problem came back!
     
    Is it possible for a virus of type som to cause this problem.
     
     
    Anthony

    Hi big95n011037,

    Not likely to contain a virus, most likely an error BIOS or driver. Consult the manufacturer of the system for
    updated BIOS, drivers from the chipset of low level and other corrections possible. Check with their forums.

    Check the other thread you have responded to for more information on battery problems.

    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/888ea422-ac6b-46d9-80e9-3d368d8f2319/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Firefox is using excessive via "Background App Refresh" battery charge - Although setting being decommissioned.

    I have background App refresh disabled - the scale of the system. However, the Firefox application has managed to get a huge 8.6 hours of substantive activity App Refresh... and eat an important piece of my battery charge in the process. He has used more battery than the Safari app, even if I used just the Firefox App Firefox does NOT respect (and iOS is obviously not properly apply) the updating of the background App setting.

    The Firefox application won a quick deletion of my iPhone. I can give him a second chance in the future, when Apple and Mozilla had the chance to solve this fundamental problem App update.

    Attached are two screenshots. The first is my screen background App update, which shows that I have background App refresh disabled in its entirety and the second, my main screen of the battery, which shows the excessive amount of the battery used by "Background App refresh." Firefox is a flagrant violation in the Protocol of the battery by the Firefox app... and unfortunately, iOS has allowed it to happen.

    I am very pleased to announce that the issue of excessive background use I had experienced with a previous version of Firefox for iOS is part of Firefox version 1.2! I now use the normal battery with little or no background activity. I am very pleased and I intend to continue to use Firefox on iOS regularly.

  • MS A30 - battery charging when I plug in the power cable

    Hello

    I'm having some problems with (I think) on my A30 power management utility. When I am running on battery power and I plug in the power cable, the battery continues to discharge even if the laptop 'knows' that it runs on the power grid (ie the utility says "current generator: alternating current.") "Online, discharges: 82%. Strangely, if I put the laptop in mode 'sleep', then resume, she goes back to normal (i.e. working on current alternative, the battery charges).

    It is true, I think that this began after I installed "PC Pitstop optimize Scan" www.pcpitstop.com (please, not conferences - I used a couple of their public services before and they were very good, so I thought it would be too much), so I guess it's some sort of configuration problem, but I have no idea where to go from here. I went through all the options on the power management utility, but they all look sensitive. Any ideas (other than do not install software stupid, doubtful)?

    Kenny

    Hi Kenny,

    I experienced this behavior on my A30 where the system says it works on current alternative, but still drains the battery and stops eventually.

    In my case the problem has proved to be a loose DC Jack that sometimes cuts off contact with the socket on the back of the laptop. This momentary loss of power DC seems to provoke the power management utility switch to battery power, even though the DC power is restored. The only way out of this situation is to Hibernate / restarting the laptop.

    I think that it is a problem with the power supply subsystem in the laptop that does not react properly when it encounters a momentary loss of DC. Then the Toshiba power management utility is no longer responds correctly and switches to the battery power.

    My only solution to this was to anchor the DC cable to the back of my A30 so that there is now no chance of the plug DC moving in its socket. This has proved to be very effective for my A30 and I've had no recurrence of the problem.

    HTH

  • Battery charge R200 options?

    I can't find a setting on my R200 where I can turn the battery charging when wallconnector is in. Batterylife should be longer if she wouldn charge every day. It s it souch options on my R200?

    Hello

    There's NO other way. If the battery is placed in the laptop and you use the AC adapter as well as the battery will be charged.
    You must always remove the battery if you work with the main power supply, because the procedure of permanent load is not good for the duration of battery life

Maybe you are looking for

  • Phone not ring?

    My wife has an iPhone 6.  Recently the phone stopped ringing or give notifications of text.  Also, I have no sound in most applications.  Speakers work as he can still play acoustic music and videos.  Have checked as far as I know to check do not dis

  • HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

    OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems. IDT Sound Drivers (IDT High Definition Audio Codec): Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows. I've teste

  • T550 laptop keyboard light

    How can I get the backlight to work on the keyboard?

  • zBook 15 - SSD encryption problem

    Good afternoon everyone, I get the error message below. "An error occurred during initialization authentication pre-seed. (0x9a00). The problem is the following: Image, pushed to the machine using the Clonezilla software. It is a standard constructio

  • Table programming don't hear is committed

    I have a table control that I created by NewCtrl program.  I put its control mode to VAL_HOT so that it will listen to validate events when I edit the cells.  And yet, the EVENT_COMMIT never happens. A test, I created a table in my UIR, put in hot mo