HP LaserJet 600 M602: HP LaserJet 600 M602

Similar Questions

• LaserJet 600 m602: Laserjet 600 too large print the number of copies

  I work at the public library, and we have a Laserjet 600 m602 to our public access computers to use. It is a network printer. We have problem with printer what impression of the office 2010 products, if more than one copy is requested printer will go crazy and print several copies much more than requested. The printer screen will say 1 X print the number of copies. Only way to stop it is to remove as many jobs he sees. It acts as if it were several jobs. We do not see this problem when printing from the Internet. Driver HP laserjet 600 M601, M602 M603 PCL6 HPCM600c. processor is set to WinPrint - Raw. Bidirectional support is disabled.

  Firmware is 2305090_000468

  I had already installed the pilot PCL6 universal and implemented to date to 600 M601, M602 M603 PCL6 thought that could be the problem but it has not fixed the problem.

  I would appreciate any help on this matter before going to is broken on paper.

  Thank you

  Melanie

  Solved.

  After a lot of research on reading and tests finally discovered the problem with drivers print and collate. Default settings for Microsoft Office 2010 and Adobe Reader are to gather if one that one copy is activated. For some reason any that caused printer to go crazy.  I tried the Standard driver and universal for the printer, but always had the problem of printing too many copies. I used the PostScript driver and it solved the problem.  Now just get the number of copies required. Thank you for your help.

  Melanie

• HP LaserJet Enterprise 600 M60: Avoid duplicate copies of HP LaserJet Enterprise 600 M602

  Hello

  We have several printers HP LaserJet Enterprise 600 M602 installed at different locations, printers at different locations are connected via USB to a berth to, when a use goes from 1 location to the other place and docks of the toughpad in dock station... another copy of gets printers installed copy 1 copy 2

  We don't want no copies of printers is installed because on all locations, we have same model...

  Can you please advice how to avoid multiple copies and a generic installed printer prints on all sites...

  Kind regards

  Atif

  Since they are attached USB you don't have any options.

  Each USB printer is recognized as a different device, so you can't print to one with the installation of the driver for another.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• Printing of documents that contain the letter and legal-size pages - Laserjet 600 M602

  We have a printer Laserjet 600 M602, that does not automatically select a tray to print every time someone tries to print a document that contains the letter so many pages of legal size.  The default printer for the Tray 1 (Manual power) and the user will have to walk over to the printer and the printer to select the correct tray.  I went in the printers settings via the web interface and I set the tray settings to the following: Tray 1 - any Type of Size/Any, bin 2 - letter/plain, plateau 3 - legal/Plain and it still does not print correctly.  Unfortunately for the printer settings, it was on that I'm comfortable doing.  I read the print driver may have changed, but we use the driver included with the disc and I guess that it would be sufficient that this driver.  Does anyone know of some setting that I might be able to change the printer or if it is indeed a print driver problem?  Any comments would be appreciated.

  Thank you

  I was able to receive help this morning from HP support.  He turns out, there were two things that I needed to change.  The first is that when printing from a pdf file, there is an option in the print area for "Choose paper according to the size of PDF page source" and the second thing, it was with the printer printing preferences.  In the printing preferences, under the "Printing shortcuts" tab, the paper Type has been set to Prepunched.  We changed this Unspecified.  After making these two changes, the user is able to print correctly in the printer.

• LaserJet 600 M602 always the default manual feed

  Implementation of a new HP LJ 600 M602dn. print from a workstation running Win8.1, using the Universal Print Driver PCL6 or the specific printer driver. Printer is set up on a network with a static IP address.

  Tray 2 and tray 3 are loaded with letter, plain. All print jobs calls for feeding the paper in Tray 1 unless the manual loading is turned off via the web interface of the printer. Bin sizes can be set using the web interface. Tray 1 is set (automatically) on any size, any Type. I tried to change the settings for 1 drawer under the Board asked to use (first/exclusive) and manual of fast food (always / unless loaded) and no parameter has no effect.

  I want to just my impressions to use paper automatically from tray 2 or 3 and no prompt for manual feed, especially as Tray 1 is not in use (out of paper). Manual power turning off does not seem a good option because I I want to use at a given time.

  Why this set is the default behavior? I want to just print and the printer to process the job without stepping on to him and pressing a button.

  Manual feed should be disabled by default in print settings. Turn it off does not mean that you can not use the status bar, it just does not prompt you to load with paper on each print job.

• HP laserjet 600 M602 tray 2 doesn't recognize a paper A4.

  Stage two does not recognize A4 paper. I tried to adjust the tray itself and it is defined correctly for A4 format. I tried to adjust the status bar for different size documents, but there is no change.

  The tray by default one size of paper custom 170 X 282 mm, which is the most important, that it will allow me to set the custom size. Other sizes it recognizes ate A5 A6 B6 and postcard but not A4.

  Tray 1, the manual feed tray prints ok but I need bac to be the default bin.

  Does anyone have a solution to this problem?

  Thank you

  Hi swatson888,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• LaserJet 600 M602: HP LaserJet 600 M602 don't will switch to tray 2 when Tray 1 is empty

  Trouble for the printer to automatically go to tray 2 when Tray 1 is made of paper.

  A number of things that happened here.

  1. the printer I have access to proved to be wrong. It was actually a M402. Then when I would try to fix the settings via remote access, he would change and then do nothing (because wrong settings of the printer).

  2. the sliders in the trays that are supposed to be flush on paper, were in fact not flush with the paper.

  This resulted in a loud knocking coming from the printer and the printer does not pick up paper from the bin.

  Thank you very much for the help!

• HP Laserjet 600 M602 printing reverse

  the pages are coming out opposite. for example, when printing the letters are white and the rest of the page is black. What can I try to fix this

  michaeljosh87,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps.

• Printers Multifunction LaserJet 600: Laserjet MFP - tray 2 600 do not lift

  So I have a printer Laserjet 600 who repeat his tent raised tray 2 assumed that the engine is down I just here for an overview see if there is anything else I can do. I passed on trays just to make sure that it is not this, but still the message happens.

  Does anyone else have this problem? You can simply replace the engine? or does go deeper then that as a control on board is no longer sends the data to activate it?

  The number on the left indicates the number of page when the error occurred, the number on the right is the error code.
  
  In this case, your number of pages current is probably higher than the numbers on the left, which means that those who are the old codes and have nothing to do with the current problem.
  
  I just faked the problem on the M602, I removed the tray, determined which finger came out of letter size paper which is the middle finger.
  
  Then I reached in and pushed the switch from the Center to the bottom so that the printer has been trying to raise the tray and after about 10 seconds, he got an error 60.02. I repeated the process twice, in an interesting way, the first time that I had not seen the error immediately, I had to push the home button to access.
  
  I work under the assumption that your machine is not any additional trays under tray 2.
  
  At this point I would replace the DC controller, but I have a spare for troubleshooting if that would make it easier for me than for you.

• LaserJet M602 - 49.4a.04 error

  We have a LaserJet M602, which had worked very well for over a year. Yesterday, the printer stopped printing and dispalyed a "49.38.07 Error".

  We have updated the firmware to the latest version (2300331_377983), power cycle the printer according to the instructions from HP, but the printer now returns a "49.4a.04 error".

  If I unplug the cable N/W of the printerand cycle power, he returned to the screen "Ready". I can print the Configuration page, page setting, etc. If I plug the cable N/W, "49.4a.04 Error" appears in a few seconds. I can access the printer through the WEB interface, display all the parameters network, etc, so N/W communication seems to work fine.

  Entries on the source of the "error 49.4a.04" or ideas would be appreciated.

  -Thank you, John

  Hello, I would erase printing then try to run some test prints to see if the machine comes back with the error code. I wonder if it's a corrupted file which causes this error code to appear, sometimes a 49 error code may be just corrupted file to data/hit machine. Also, I would try the printer connected to a laptop computer on the network to see if you are able to print or to see if the error code returned. Usually, if you have no impression of the issue for a laptop computer to the network, then there is something on the network that is causing this error popping up.

  I hope this helps...

• Order PCL for printer laserjet 600 to use bin source 2

  LaserJet 600 M601. Configured with 3 drawers of paper and and the envelope feeder. I have a program that sends text documents to the printer and I need to know the PCL5 or 6 codes to select the paper tray 2 # print the form. I tried normal codes that are in the PCL manuals but is still the #4 drawer pulls. I also used Esc & l20H and again, he shoots the #4 drawer.

  Hi Bill_esrd,

  If, by chance, the information that dansdaduk has provided does not resolve the problem, I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Thanks for your time.

  See you soon,.

• Application block printing on Laserjet M602

  Just install 2 new printers Laserjet M602 on our network.  We can print once or twice to the printer and the application tries to print (WORD and others) crashes.  The printer makes a noise like it was going to start printing, but does not work.  Recovery is to restart the computer.  Then you can print again for a few jobs.  This levonorgestrol on different PC printers.  Tried the drivers that are provided with the printer and drivers HP Universal, same problem with either.  PC 32-bit W7.  Firmware seems to be current.  Any help would be appreciated.

  It turns out that Office2013 was the application having problems printing.  The following link describes the problem and the resolution of disabling the print feature in the HP driver.

  http://social.technet.Microsoft.com/forums/Office/en-us/6fad3461-49cb-4f53-913b-7b8dbfaa8c75/Office-2013-crashing-after-printing-to-HP-laser-printers

  Thanks for all the answers.  Detective Conan

• reset password (cold reset) to a Laserjet 600 M601?

  Someone knows how to do a reset of the a Laserjet 600 M601 (cold reset) password?

  No reset 'by default'. I need to reset the password.

  BB

  Do a search for the repair of LaserJet Pro 600.

  You won't find Manual printer maintenance on the HP website, but they are there.

  Depending on how stubborn the s of the printer, you may have to use the pre start menu do a partial clean.

  A word of warning, a full clean will scan all the firmware on the printer and it will need to be recharged. I do only one full when I have two different low capacity Flash DRIVE with a copy of the firmware on them.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• HP laserjet 600 m601

  I have HP Laserjet 600 601 m, I can't update firmware which i download from the HP Web site but I does not work.  I try to 8 GB USB key, you can see in the photo the error.

  Can help you or you have an idea?

  Package not supported means usually you have the firmware for another model, or possibly a corrupted download.