HP laserjet Pro 400 computer M401n restart

Similar Questions

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• Lost password - M401 of printer HP LaserJet Pro 400 series

  Hi all

  We have a years M401 of printer HP LaserJet Pro 400 series(touch screen model), a fo our former employee requested a password. Nobody knows this password and need to change the IP address of the printer.

  I'm looking to do a factory reset. What I found on the user guide, the procedure would be:

  Restore the default values set in the factory (touch panel)
  1. from the home screen on the product control panel, press the Setup button.
  2. highlight and press the Service menu.
  3. highlight and press the default button and then press the OK button.
  The product automatically restarts.

  The problem is that when I touch "service" menu, the password prompt prevents me from going to the next menu. Is there another way to do a factory reset on this printer? A button physics somewere? Something to do with the power button may be?

  Thank you very much for your help!

  Oliver

  I found how do:

  After a the NVRAM initialization, reconfigure all computers that print to this product so that the computer can recognize the product.

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• Reference Dell D10S: Software 451dn Laserjet Pro 400 has error during installation.

  LaserJet works fine when plugged in to USB, but now moved to a place wireless. The software will not work.

  I tried install printer Win 10: "the pilot is not available.
  Tried to uninstall the universal printer driver, restart, reinstall the HP driver, error (without code).

  HP Print doctor can find the device downloads the latest version, but it crashes every time (error, no codes).

  Win 10 can see the printer... it is therefore in the range wireless.

  I tried all the software different packaging to win 10 on HP site... all get an error during installation.

  Here's what worked.  I downloaded the universal print driver from HP.  These installed to their default location.  Taking note of where they have installed.

  Then, 10 Windows, try installing the printer laserjet Pro 400.  "Missing drivers".<- this="" is="" an="" important="" step.=""  leave="" the="" printer="" icon="">

  Then go to control panel, small icons.  Device Manager.  Search for printers, find the Laserjet printers.
  Right-click and choose update drivers.  Do not update automatically.  Choose the manual option.

  Look for the universal printer driver.  Wait a minute... BOOM.  All right.  Printing of all wireless PC and laptop.

• LaserJet Pro 400 M425dn: Unplugged network Cable

  I just bought a printer LaserJet Pro 400 M425dn and tried to set up on my university network. I have a static IP address for the printer. However, no matter how to set up the printer, I see only cable disconnected in the status screen of the network on the touch screen. The cable and the wall socket is working, since I can connect to a computer using their network.

  There is no flashing lights, close the network card. Is the printer network card defective?

  The network port is part of the trainer so if defective, you need to replace the formatter.  Having said that I had one who wouldn't not connect to the network.  I don't me remember not if the link lights have been turned on or off, but he finished the port has been wired incorrectly.  The pairs have been overturned as a crossover cable, and we have done the same and connected a laptop to the port and it works.  We discovered that the laptop automatically detected the pair reversed and connected.  Not sure if this is your case, but I propose the printer to another location just to see if I get a clear link to another location.  If no link light, then I'm afraid of the trainer will need replacement.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• LaserJet pro 400 drivers for Windows 2000

  I have a m451dn color laserjet pro 400 I have purchassed.

  One of the systems in my network is a windows 2000 system that is loaded and set up with many programming tools and so on.

  I don't want to break this fine computer running system.

  I don't want to have to reload everything in a new system.

  Simply because it is old, it seems that HP has decided to does not provide not printer drivers for it.

  I connected to the printer on the network, the IP address and tried some older printer drivers.

  The printer works fine if I don't have a color.

  It would be nice to be able to print in color.

  Is there a color driver that is compatible with this printer and Windows 2000?

  Now that I have fought through, I have a way to make it work

  Select another driver from HP - HP Color Laser Jet 4500 worked for me color

  go to the printing preferences - paper quality - check the color

  go to priferences print, cocument - advanced - options - select color

  go to color management - you may need to add a color here profile

  I don't know how this is required, but it works now

  I had to fix on the printer through the actual IP address

• MFP HP LaserJet Pro 400 M425dn cold reset

  Hello!

  Help me! How can I make cold reset HP LaserJet Pro 400 MFP M425dn ?

  You can do 'factory reset' menu of the control panel; or permanent initialization of power first, holding and cover the corner area to the right / left of the control panel when you feed on... release your finger when you see «initialization permanent...» ». After you complete and return the loan, it indicates the reset is complete.

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• laserJet Pro 400 color: printer

  Hello Mr President
  I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
  and when I turned it on. I show masseage like this {10.1002 electric memory error}
  How can I solve this problem, Mr President

  Hello Sir,

  The error that you expose is a problem with one of the toners.
  The magenta to be precise.
  
  In this case, the recommended action is to replace the magenta toner with an original RESUME.
  
  Kind regards

• Windows RT and HP LaserJet Pro 400 M401w

  I'm trying to connect the HP LaserJet Pro 400 M401w to my Surface tablet running Windows RT.

  I tried to put in the IP, wireless sensor and using the USB cable.

  He is not with the IP or wireless detection.

  With the help of the key USB Cable it things is a CD Rom   If I add a printer and trying to choose manually the printer isn't on the list.  Any help would be appreciated.

  Hi SydsMom, welcome to the Forums of HP. If a product contains the necessary built in the RT drivers, he just needs to be plugged and RT Windows should recognize and install it.
  
  I did a search for "HP LaserJet Pro 400 M401dw Laser printer" with the: Windows Compatibility Centerand it's Windows RT 8.1 compatible.
  
  Microsoft provides these simple instructions: install a printer in Windows 8.1, Windows RT 8.1
  
  In addition, I'm not familiar with that printer, as it is a business model supported. I suggest posting in the trade forums, to get more input. You can do this HERE.
  
  Series HP LaserJet Pro 400 printer M401 Support

• HP LaserJet Pro 400 m401dne: print from Notepad

  Hello! I have a new HP LaserJet Pro 400 m401dne. Everything works fine except when I try to print both sides of a Notepad document copies. As soon as I select the duplex option, the entire document disappears. We had an another HP LaserJet only printed on one side of the paper; who would have something to do with it? Still, I have this printer on the printer list but am selecting a new. I can print any other documents on 2 sides; just don't leave the notebook. Thanks for any help you can give me!

  Thank you, HP! The warranty issue has been resolved and so was the two-sided printing problem. The technician had to install Universal printing and now I can print copies front and back of notebook and everywhere else.  )

• HP LaserJet Pro 400 M401dw: HP ePrint App and Android 2.2

  Hello

  I hope that all is well.

  How can I find and install HP ePrint for Android 2.2? I just found this link https://play.google.com/store/apps/details?id=com.hp.android.print for Android 4.0 and more. For your information, my printer 'HP LaserJet Pro 400 M401 dw' and my smartphone ' HTC Desire, Android 2.2 ".»

  Thanks in advance for your help.

  We wish you the best.

  Mrwan

  Hello @Pooneh,

  Welcome to the Forums of HP's Support. I understand you are trying to install the HP ePrint app on Android 2.2 device. The ePrint application is only available for Android 4.0 versions and later versions. It is not supported for earlier versions of the Android operating system.

  Sorry if this isn't the answer or the solution you're looking for. If you have any other questions, feel free to ask.