HP LP2408ZX: Monitor displays no - HP LP2408ZX

Similar Questions

• Re: Tecra S5 - 15 q - monitor display lines vertical and error 43 for GPU

  After about 5 years my Tecra S5 is experiencing problems with its graphics.
  Most of the time the (internal and connected an external via VGA) monitor displays vertical lines, and windows gives an error 43 on the map.

  I was wondering if there is a way to solve this problem, and if this problem could be solved under warranty (although the protohistory of the warranty expired 3 years ago.) .

  In my opinion, it is bad material work and as far as I know only way to fix it is motherboard Exchange. I n t have this model of laptop, but I can presume that the GPU is fixed on the motherboard and cannot be traded separately.

  Fixed under warranty? Of course.

• Pavilion a6528p: no monitor display

  I bought a new power supply for more tension and installed (plug connector had a 4 contacts more than the orginal but plugged Council ok) after having done that I did get no monitor display so I put power supply original back in and still nothing on the screen. Could I have burned something? Everything seems not start dvd, keyboard, and cooling fans just no display.

  Well I have the new power supply the value of lb/po2 and used bios graphics card dvi_d instead of the vga and this cable works thank you at all

• old PC, new monitor display problems

  Just bought a new monitor for my old Presario SR1500NX, but I can't adjust the screen resolution of 1600 x 900, who wants my monitor - it has a maximum setting of 1024 x 768. (Monitor = from HP2009m, widescreen) The graphics in my PC is "VIA / S3G UniChrome IGP. When I go to the tab view S3 it shows "Display devices" like an old CRT monitor, which I did not. I was using an older 17 '' LCD monitor 4:3 in the last 3 years, & it worked out of this video card, but my new widescreen monitor display is "stretched veeerrryyyy." I think I need a new "video card", correct? If so, can you recommend one if I can buy and install it (I printed installation instructions of a new video from the HP Web site card for my PC). I'm kind of smart with the software, but not the hardware side of computers. I installed more RAM on my PC, so I'm not familiar with the inside. (And no, I can't afford a new computer right now - I know that mine is old, but it works perfectly for my needs, I wanted just a new, larger monitor!) Thanks for any help you can give me.

  AG, here is a video card that should work with your power supply and a new monitor.  It is not a barn burner, but a lot more than the maximum resolution that is required to run it.  It is said that the minimum power is 300W.  However, manufacturers tend to overstate the power requirements of their cards.  Read the customer reviews and specifications on the product Page.  This will give you some good information.

  The card should improve the performance of your computer, too.  It will free the system memory that is shared with the video chip and add video memory on the card itself.  You could improve the memory to 2 GB to increase performance even more.

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• For about a month now in the monitor display is fade. Is there anything I should do?

  Original title: Discolured display

  For about a month now in the monitor display is fade. Is there anything I should do?

  Hi Yahia,

  1. is the monitor of the entire area is discolored?

  2. how old is the monitor?

  3. What is the number of brand and model of the computer graphics card?

  I suggest that you download and install the updated driver for the graphics card on the computer by visiting the computer manufacturer or the manufacturer of the card manually Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  If the previous step fails, then connect the monitor to another computer and check if it works, it's to check if the monitor is that went wrong.

• Source monitor displays the desktop scrambled instead of video

  When I run PP CS6 and try to play the film screen in the source monitor displays a blurred my office instead (attached image) version. Audio works, the read head movements and changes in power button, but it is not any video.

  This problem started recently, after about 7-8 months of first flawless performance.

  Some system information and software:

  Premiere Pro CS6 version 6.0.5

  Running on a MacBook Pro

  OS X 10.8.5

  Processor Intel Core i7 2.6GHz

  16GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  

  If you need / want additional information just ask.

  Thanks in advance.

  Hi Sportz007,

  Have you tried trashing prefs?

  Thank you

  Kevin

• external monitor display resolution not as an option

  I try to have an external monitor for MacBook Pro (the Captain). While setting up, I couldn't find the proper resolution (1920 * 1080 @60 Hz) in the display settings. I did a nd restart read a lot about this, but I couldn't find a simple solution on how to add a resolution in the option if it is not found.

  hope you can help me configure the resolution to the required resolution.

  After a screen shows what display preferences for the external monitor

• External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

  I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

  They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
  I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

  The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

  I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

  Any help would be appreciated.

  Alex

  Are you using the latest driver?
  In my opinion you should not update BIOS.

• Satellite A30 714: external monitor displays in 640 x 480 only

  I am trying to connect to an external LCD monitor with a native resolution of 1280 x 1024. When I plugged the screen plug-and-play Windows XP installed, now when I switch to the screen of the laptop to this screen (or running dual screen) it will be the only display at 640 x 480 and does all of the options in the graphic properties to change the resolution.
  But, if I use the external display as extended desktop, then I'm able to put any resolution I want upward and above 1280 x 1024.
  I am running XP Home and I have installed the latest graphics drivers from Toshiba.

  Can anyone offer advice please?

  Hi Derek

  It's very strange. If the correct driver is pre-installed to avoid any problems. If you want to use just external monitor using FN + F5 to change the Office externally and then change the resolution (the number of screen 1 must be enabled).

• HP 2310 m monitor displays more volume bar on screen

  When I use the volume on the keyboard controls, the display bar of volume of the monitor (in the center of the screen) no longer appear. The volume will still change, but now without the display bar.

  (Note: don't talk about the Windows volume control in the taskbar.)

  How can I get it back?

  Windows 7 64 home

  Discovered that the problem is not the sound card.

  It was caused by the CV SmartMedia SmartMenu came with my computer.

  It was a startup item, and when it has been disabled in the startup list, the volume control bar shows up... except if you started the program.

  So I decided just to allow him to return to the boot list.

• Multiple monitors / displays on y560 (win7) - total 3 screens

  Is there a way to output to 2 monitors outside the laptop screen?

  I thought for sure it would be sustained but I can't get it to do any 2 of the 3.

  I wish I could keep my laptop usable and also 2 external monitors with VGA and HDMI output.

  Any ideas? Is this possible?

  
  

  I'm on Y560, Windows 7, 64-bit, 8 GB RAM, ATI Mobile Radeon HD 5730.

  This term describes a computer with a single graphics card that has two outputs video. This type of adapter is also known as a graphics card double head. many graphics cards have a dvi output and a vga output.

  Take a look at this thread on the double display.

• Lenovo L440 will not docking station during bios monitor display

  I have a Lenovo L440 portable dock with a think pad pro. The HARD drive is encrypted with TrueCrypt and needs a password before windows starts. The laptop will not display on the monitor attached to the dock before loading windows. I changed the bios Config setting > display > display device boot, as well as all the other options display, but it does make a difference. I tried with a VGA cable and a DVI cable, and no work. I tried with 2 different L440s and 2 docking stations with the same problem on both product. I used a laptop Lenovo L540 with success the same model of docking station. I also updated to the latest version of the bios.

  I wonder if I'm missing something or if simply, L440 model does not support this feature?

  The hotline of Lenovo was not able to help.

  The motherboard had to be replaced on the two L440s to fix this problem.

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

• Have W2071d monitor, display settings do not allow non-native resolution matrices

  '' Recommended '' this monitor width setting is 1600 X 900, but when I go to the "Display" dialog box, the only options available to me are that were available using my old monitor.

  The monitor "selected" for common use (under "Advanced"-> tab monitor in the "Display settings" dialog box) is dangerously just labeled "Default monitor", and while the system produces to the monitor, it only does these original native resolutions, so that, under factory settings, the image is stretched horizontally to a significant degree, and when I put it to adapt to the proportions rather He's a little blur hired on small fonts/texts during the largest possible display setting, almost as if I ask it to produce makes me superior to output 1-to-1 ratio of pixels and the entire surface of the monitor is not being used anyway.

  In any case, the button/dialog box 'Properties' is not yet available on the tab 'monitor' breast, so I can't try to update the driver. I don't really know what to do at this point. In addition, the computer now tells me whenever I start that he detected new hardware connected, but it may not recognise, does not support installation at home, but whenever I try to point it to the drivers it tells me that the file contain no information about my hardware device.

  VGASave is the 'default' for Windows XP driver if there is no other driver available for the system. It is possible that some sort of error, or maybe an automatically Windows Update installed, breaking your graphics card driver. I would certainly try reinstall the driver as a first step of troubleshooting.

  Here is a link to the latest version of the driver for the Radeon XPress for Windows XP series:
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/integrated_mce-XP.aspx?type=2.4.1&product=&lang=us&Rev=10.2&OSType=Windows%20XP%20-%20Professional/home

  Good luck! Let us know how it goes!