HP mini 210 2000: connection problems with BT hub 5

Similar Questions

• HP mini 210-2000, loses wireless internet but works in other places

  Hello

  I got hp mini 210-2000, loses the wireless internet at home but works in other places? I have another computer mac laptop at home and no problem - always works.

  Please help - I want to fix this problem for my mini HP - I love this little book.

  Maeve

  At least you know works wireless.  I don't have a book like that, but I like them, too!  They seem to be the perfect size to carry all.

  Take a look at this document; It will give you a way to check the configuration on the side of the laptop to make sure everything is set up as it should be done.

  Laptops - troubleshooting Internet or email connection on a wireless network with Windows 7

  Here is the HP Wireless Assistant:

  Sp49408 HP Wireless Assistant

  If you do not use AND if you have IPV6 enabled, you can try turning OFF... Some ISP services not much and resist her sometimes - or so I've heard...?  The document tells you where this parameter.

  I hope this helps!

• I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

  I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

  SYSTEM HAULT CODE IS; CNU9243TDY

  ways to help

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Kind regards

  DP - K

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• Help! Mini 210-2000 Home key

  I just got my new 210-2000 HP Mini and I'm trying to figure out how to create a shortcut for the home, end, Page Up, Page Down.  I saw the reference to the use of the fn + combination of arrow, but it does not work.

  Does anyone know how this is possible.

  Thank you very much...

  People! Here is the latest version of BIOS for HP Mini 210-2000, ftp://ftp.hp.com/pub/softpaq/sp51001-51500/sp51200.exe ... Check if she brings the feature home, end, Pg Up and Pg Down...

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• connection problem with screen

  I bought a compaq presario cq61-421sa about 18 months ago, so it is now out of warranty, and I have a connection problem with my screen. the entire right is taken up by different colored about vertical lines 1 pixel everywhere and therefore can not see half the screen.

  any idea how much it would cost to get HP support to do a repair on it? as I don't have the confidence to do it myself

  Hello

  Thre are 2 things that are likely

  the video card

  (b) the screen itself

  To check this, simply connect the laptop to an external monitor (from a friend, parent,...) If nothing wrong with the external monitor, which means that the screen of the laptop is faulty, if the video card is faulty. I don't know the cost but I charge $640 plus a party; Sometiomes my recommendation is to buy a new machine.

  Kind regards.

• Problem with USB HUB using Windows 7 on Bootcamp

  I have an iMac when I installed Win 7 with Bootcamp. I have problem with USB hub. If I connect USB devices (printer, iphone... etc...) directly to my computer, it works without any problem. But if I connect them through USB hub, that they do not work properly. The sound instantly invites you, but certain peripheral functions partially and some not at all. I tried several USB hubs... same problem for all. Any solution? Thanks a lot for your answer.

  Hello

  I suggest you to see link and check.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  I also suggest you to contact the apple support and check.

  http://www.Apple.com/support/

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• Mini 210-2000 can not recover the system

  Hi, I have a 210-2000 mini hp, I did a system restore and the system crashed. I have no recovery discs and I'm stuck with what I need to do to reset the op sys, can u inbox very much my email with any help rec, im ped. He will go to the safe mode option but does not successfully start, all continuous loop again and again, many thnx, chinboy

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  You can also publish returns with the following details.

  1. the full model number and your laptop Nr series 210-2000 of Mini - see here for a guide to the location of this information or the list here.

  2 the full version of the operating system that you use (IE Windows 7 64-bit).

  Kind regards

  DP - K

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• Connection problems with M6 1205-dx

  I recently bought a 1205dx M6 model and am enjoy, but I'm having a problem with connectivity to the internet.

  Sometimes, the wifi adapter will totally fall signal. My laptop is about 5 feet from the router so it isn't falling because of a problem of distance it disconnects sometimes just the router for no reason. I can't click on network settings and reconnect quickly without problem, but if I'm in the middle of a Skype call or an online game it disconnects me and is aggrivating.

  The card built into the system is an AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter and I have everything from the BIOS updated for specific drivers for the card itself, and she continues to perform. Does anyone else know this or have a fix for this, I'd be more than happy to give it a try. Thank you!

  EDIT: I also tried the fix listed on the sticky at the top of the page, but it did not help.

  You are the very welcome.

  If all goes well, it will go around.

• HP MINI 210-2000 (?): unable to determine the precize HP MINI model to optimize the RAM (OS: other - Win 7 Starter)

  Here's the thing - I need a tip, the internal sticker shows many Chinese photo, the only thing that is written in the Latin alphabet is the first line:

  Know it: 1584-100 (space) S/N: a very long number - do not know if I should paste here.

  It is a verse below:
  Regulatory model: bushy-Chinese writing / / NMR: REPLACEMENT-F05C - don't know if it helps

  now - the "my computer-> properties-> know it's a HP 210-2000 , but it may be too broad, there are countless incarnations of the 210-2XXX series.»

  my unit uses 1.5 V - 1 GB - ddr3 10600S samsung ram - which makes the camera virtually unusable, even after killing more services/processes he eats even 650-800 MB and opening a firefox literally ends the session.

  I need to know how to find the right computer type so that I can: buy a chip of ddr3 2 GB / 4 GB that would help, or just forget and take ;/

  tips/advice welcome.
  Kind regards
  Roman

  PS. Why do my "inside the thumbnail" don't look like any of those shown in the videos of support? the computer was bought in Poland 6 years ago have I been deceived? The Chinese 'writing' makes any material completely unnecessary support.

  Hey @roman_petrescu,

  I understand that you are having problems, find the model number of the laptop. I will help you in anyway I can.

  I would first try the steps in this document: computers laptops HP - how do I find my model number, serial number or product?

  Let me know if this allows to hit the Thumbs Up and accepting as a Solution.

  See you soon,.

  TechSurge.