HP mini 210-2145DX desktop image emission

Similar Questions

• HP Mini 210-2145DX: lost administrator or power on password

  I lost my administrator or power on password to a laptop running Windows 7, don't know if it's a 32 or 64-bit, a HP Mini 210-2145DX.

  Immediately after turning on, it asks, then said, disabled system [50988573].  It is before the Windows splash screen.

  Any help would be MUCH appreciated.

  Thank you!

  KE

  That made me initially, but is it possible to get the password to connect to the home screen?  Thank you!

• HP Mini 210-2145dx for windows xp drivers

  Hello can someone please let me know what should I divers I need to install HP mini 210-2145dx with windows xp professional sevice pack 3 wireless, lan, chipset, mouse, audio etc. thank you in advace for alll your help.

  Hello:

  For the ethernet driver, download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• HP mini 210-2145dx: power of Hp mini 210-2145dx on password

  I bought it for my daughter and she herself seems to have locked some how .can someone help?

  I have a

  HP mini 210-2145dx...

  How can I recover the pass or get into the computer

  and a system to disable the code from 78422838

  Thanks in advance

  Hello

  Enter: 67580218

  Kind regards

  DP - K

• HP Mini 210: Palm Desktop (see 6.2.2) lost address book during and after the upgrade to Windows from December 10

  The problem is not with the HP Mini. This computer is running Windows 7 Starter and he Hotsyncs perfectly with my Tungsten C handheld. The problem is with a Dell Vostro, but because it is a problem of Palm, I hope you can help.

  My Dell Vostro has been upgraded to Windows 10 in September. I had a few problem get the Palm to synchronize at this time, but I thought her and successfully synched bases Memo, address and the Date of all the way up to 10 Windows update that Microsoft pushed around Christmas.

  The first Hot Sync attempt after the update given my address book disappear from desktop ONLY (running version 6.2.2) and I was not able to find a way to restore the address book on the desk.

  Handheld still works fine. As I said the HotSync with the HP Netbook (Windows 7 Starter Edition) and I would like to continue to use it as long as ITO still works.

  Try using the Import/Export built-in in Palm Desktop.

  On the PC that contains the data, go to File/Export (while the address book is open and being viewed).  This will produce a file that you can copy to the Dell PC.  Use a flash drive, Cloud Computing service, card SD - it doesn't matter.

  On the Dell, go to file/import and locate the file.

  Windows 10 has caused some 'quirks' to appear in Palm Desktop.  We learn that we will!

  WyreNut

• Power of HP mini 210-2145dx on password

  I lent my mini to my sister while she was working on a cruise ship. I just got back and when I turned it on I got 'enter the password administrator or power on password'. She does not remember it. What can I do?

  Try 78431269

• How do I clear all information on my mini 210-2145DX?

  Hello! I'm giving my computer away and I want to erase each document and put it back it was when I first bought it! Can you help me to do this?
  Thank you

  Hello

  Please use the #2 of the following instructions:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?prodSeriesId=4075896&ObjectID=c02638587

  Kind regards.

• HP Mini 210-2145DX: need for ethernet and after own W7 Starter installed network adapters

  I did a clean install of W7 Starter after replacing the hard drive.

  No ethernet or wireless.

  The device manager says need drivers for the ethernet, network controller and video controller.

  The page the product drivers a lot of bluetooth and different drivers for the wireless. don't know what to install and in what order.

  Hardware Ethernet ID: PCI/VEN_10EC & DEV_8136 & SUBSYS_1584103C & REV_05

  Network controller Hardware ID: PCI/VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01

  Video controller ID: PCI/VEN_8086 & DEV_A012 & SUBSYS_1584103C & REV_00

  Thank you

  Mike

  Hello:

  You need these drivers...

  Ethernet: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Network controller:

  Broadcom Wireless LAN Driver for Microsoft Windows 7

  File name: sp51605.exe

  Video controller:

  https://Downloadcenter.Intel.com/download/19494/Intel-Graphics-Media-Accelerator-3150-for-Windows-7-32-bit

• HP Mini 210: Clean install W7 Starter on Mini 210 - Microsoft says that manufacturer is Blocking install Key

  I recently did a new install of W7 Starter on my HP Mini 210-2145DX. I used a Belarc key finder to retrieve the key of the operating system before the clean install with a drive of W7 I own. But the W7 Starter will not check with Microsoft and gives an error code. I called Microsoft and read the error code and the key of W7. The woman asked me to find the certificate of authenticity that is connected to the computer. I told her that it was not. The manufacturer was blocking my W7 key, she said. It will not help me any further.

  Does anyone know a way around this?

  Thank you

  Mike

  Solution!

  I found the Microsoft Key and certificate of authenticity of green under the bottom of the plastic case. This case has been deleted by pressing the orange button plastic under the battery.

• Reinstall the image on HP Mini 210 HD with XP Pro

  I have not find a relocation or partition disc to create the original disk image, where can I find it for my HP Mini 210 HD?

  Yes, I tried to enter this part of the page, but the links everyone to bike to the front page!    I said something on this subject earlier today.   Now I just get an error HTTP 500 Internal Server Error when I click on the link that indicates the recovery media for XP.  (Sorry, is XP Home edition - too many computers!)

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=4075983#N744

  I don't think it works anyway, as I was expecting to have a disk image or a DVD of recovery with the drivers and all.   My other HPs have a recovery partition, the Mini does not.

  Thank you

  Mary

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• PC HP Mini 210-2007sl

  
  

  Hi MrTank,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Mini 210 - 2007sl and need to restore the default settings on the Mini. Here is a link to restore the system to factory.

  You can try to put the original image on USB device 32 GB is necessary.

  I hope this helps.

  Thank you.

• HP Mini 210-1170NR will not post

  my HP Mini 210-1170NR netbook is no longer valid.

  the battery seems to have expired, but it worked for a week or so plugged into the wall.

  now, when I turn it on, the power light turns on, turns on the caps lock, but nothing except a HDD occasional light twinkle works. doesn't appear on the screen, nothing seems to activate (i., flickering e., backlight setting, etc.).

  I tried to connect via SATA desktop HARD drive and the hard drive works.

  are there steps I can take to fix, or will it take to replace it?

  Hello
  
  Unfortunately, it seems that you need to replace the mini can.
  
  You can try to contact support to see what options they have for you.
  
  Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.

• HP Mini 210-3000sd: HP Mini 210-3000 memory update

  I bought a HP Mini 210-3000sd, or LT963EA #ABH used. It came with 1 GB of memory, which is great for Linux with a small desktop computer, but most certainly is preferable. I think to upgrade the memory, but am a bit confused:

  According to the product page.
  http://support.HP.com/nl-NL/product/HP-mini-210-3000-PC-series/5082191/model/5116173/document/c02904... 1 GB is the maximum amount of memory.

  After Crucial, they have a module for 2 GB of RAM for this laptop, only they call cell 210-3000CTO and their recommended module has a non standard of 1.35v rather voltage of 1, 5V.

  The maintenance manual mentions single-channel 2GB DDR3 - 1333 MHz, no mention of any particular tension, but they list a number of spare parts 621565-001, which I couldn't find in the HP store, and he otherwise would be probably much more expensive than elsewhere.

  Can someone give me more specific information, that is, the memory is expandable and if so, should it be 1.35v?

  I got the memory today. Replace the memory module was quick and easy. Now the Starter Edition of Windows and Linux see 2 GB, and everything starts much more quickly.

• NetBook, HP Mini 210-3000ew vs Windows 8, NEED HELP

  Hello

  I have a few questions. At first sorry for my English, I know it's horrible; D.

  1. I want to install windows on my Hp Mini 210-3000ew netbook 8. For an application on this OS, I need to have the screen resolution 1024 x 768, while my normal screen resolution is 1024 x 600 (recommended by the manufacturer). I can go to regedit and change the 'Display1_DownScalingSupported' value to 1, so I'll be able to adjust my screen resolution of 1024 x 768, but I don't know if this operation won't spoil/break my screen/matrix. What are the chances that my screen/matrix can break down as a result of this operation? Or maybe after a certain period of time to aid higher than the recommended resolution that I will get a few dead pixels or something like that? Is - this windows 8 after changing the present resolution be ok? And can I install it with screen resolution 1024 x 600 or Setup will be out of reach of the screen?

  2. I've been looking for the drivers for windows Web site 8 for Hp Mini 210-3000ew, but I only found drivers for windows 7. They are compatible with windows 8? Or I do not need to install any drivers for my netbook with windows in all 8?

  I am happy for any help. Thanks to advice.

  As far as I know, Windows 7 Starter is an OEM product only and the only source is from the supplier. Microsoft doesn't have a link to download the image.