HP officejet 4215xi all = a

Similar Questions

• OfficeJet 4215xi all-in-one: scanner

  My officejet 4215xi all-in-one decided to stop scanning correctly.  I feed my original in the automatic document feeder (as I did for years), it is no longer pulls the documents in the leading pace the digitized the image being spread or with about 2-3 inches of white space on the leading edge. I listen to the officejet, looks like it starts scanning, but the paper don't be pulled ahead for a few seconds (where white space and text image burrs). Yesterday, I was able to scan one page at a time with a bit of success, but today I can't do and I'm now getting an error message that the scan was not successful. I hope someone can give me the steps to get this corrected.  Thank you!

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  The extended Scan software is the last software scan appearance fo the HP.

  Good day!

• my old printer on my new computer with windows 7, the printer is a HP officejet 4215xi all-in-one

  I just bought a computer that is running Windows 7, I have a HP printer officejet 4215xi all-in-one.  I need to intall an earlier version of windows or y at - it a patch or driver I need to download to make it work.

  You must install the drivers WIndows Update as shown here .

• OfficeJet 4215xi all-in-one false paper jam?

  My oficejet 4215xi gives error message "paper jam".  I cleared and cleaned as well as I am able. Print cartridges won't move from the left side. Is this fixable or dead?

  I assume that everything is resolved. I got a new printer. Support HP says the Impossible error condition be corrected or repaired.

• OfficeJet 4215xi: print with out-of-paper Message

  I use a portable printer Officejet 4215xi and s Probook 4530 computer (windows 7). It will not be printed, but present in the queue. When I open the page of the printer in the Control Panel on the computer, it says that I have more paper. I'm not. I turned off the printer a couple of times and restarted. Still not printing.

  I've seen many times where the OS told me I was on paper, but the printer was never trying to print and have concluded that the operating system is sometimes.

  Sometimes, the problem was a simple like a loose cable, & I was able to verify that the operating system was disinformation me.

  First I would check my USB cable is plugged at both ends, the PC and the printer.

  If I'm connected wireless, then I'd temporarily install a USB cable to test the printer.

  You've restarted the PC? I need to ask this somewhere, just in case.

  You should check in your queue and ensure that the printer is not inadvertently paused.

  You will need to remove and reinstall your driver. You may need to delete all the print jobs before you delete the printer. And if you are connected through USB disconnect from the removal of the printer driver and then reinstall the printer.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a technician for a post click the thumbs up button under the post.

  You can even click on the two buttons.

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• I lost the CD start to my officejet 5510 all-in-one printer

  I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

  You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

• HP officejet J4540 all-in - ONE: fax

  When you try to fax with my hp officejet J4540 all-in - ONE I hear the tone, the display shows fax is connected, but I get always a message "fax send failed". I ran a fax set up the test and everything passed. The question might be the telephone line in my house? Phone company put a new filter on the fax line and he sent a fax that day, but none after that. He always says "fax sending failed.

  Hello

  Please contact us. I understand that you are unable to send faxes from your printer.

  You can follow the steps mentioned in the document.

  http://h20565.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01670414&docLocale=en_US

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.* *.

• HP Officejet J4580 all-in-One: I just need a disc from the drive, please!

  OS was wrong?

  Hello

  The disk may be too old now. If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe

  More resources:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers

  Kind regards.

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.

• ePrint HP Officejet 6500 All-in-One-Drucker - E709a

  Hello

  Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?

  Thanks Chris

  Hi Chris,

  The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:

  http://support.HP.com/us-en/document/c03722645

  Kind regards

  Shlomi

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.