HP officejet 4255: error code

Similar Questions

• OfficeJet 4630: error code stampante hp officejet oxb3746868 4630

  error code oxb3746868 in the hp officejet printer 4630

  error code oxb3746868 in the hp officejet printer 4630

• 0x6100001d on nine OfficeJet 4620 error code

  I recently bought a printer and just lit, installed the original cartridges, I found inside the box as requested on the screen and closed the lid. The screen telling me install cartridge. I waited 30 minutes and nothing happened. I removed the power cord, waited 15 seconds then placed in, the printer automatically running and said of real installed HP cartridges. During initialization, then the 0x6100001d error code. What can I do to fix this?

  I'm not a beginner because I work primarily in the Department of computer SCIENCE, I am familiar with functions of reset and I already checked the cartridges and the printer. The combination # 6 for the hard reset does not work for me. I bought the printer in amazon.de Germany if you find this information. Thanks in advance!

  If you have tried the instructions from this link and it does not solve your problem, the next step would be to get it fixed or replaced under warranty.

  http://www.HP.com/go/warrantycheck

• Officejet 4630 error code

  Last night my 4630 Officejet asked to install updates. He appeared to lock up during installation, so I unplugged the power and plugged again. Now the screen says "CODE of ERROR 0XB002740C" and will not respond.  I followed the steps of troubleshooting at http://support.hp.com/us-en/document/c00489814, but it has not cleared the error message or allowed me to print.

  Any help would be appreciated!

  Thank you for your response. I ended up chatting with HP support and after going through all the procedures of troubleshooting without success, HP replaced my printer free (yay for security!).  The new printer works like a champ... but I will not install updates in the future I can avoid this situation repeats itself.

• Ink system failure Officejet 6500 (no error code specified)

  Ink system failure Officejet 6500 (no error code specified)

  I have turned off the machine on again (and it doesn't)

  I turned off the computer and unplug the unit (and it does not fix it)

  Without specific error code I'm not sure what to do

  Hi CHCA. Your Officejet 6500 must be out of warranty? You can doublecheck the warranty status of your printer here: http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie & lc = on -if it is still under warranty, you should not pay for a new printheaad.

  But if your printer is no longer under warranty, you buy one a. The part that you really need to order an Officejet 6500, is CN643A. If you are in the United States, here are the HP part store page where you can order the new print head Assembly: http://h20141.www2.hp.com/HPPARTS/Search_Results.aspx?mscssid=C580393F30964EDD82B16A5C641BEC41 & Searchin' PartNumber = & SearchPN = CN643A

  If you are not in the United States, start from this page: http://welcome.hp.com/country/us/en/wwhowtobuy.html , specify your country and search for CN643A.

  Also, here is a support document that should help you with the replacement of the print head: http://support.hp.com/us-en/document/c01643079

  I work with HP but my messages and responses are mine.

• OfficeJet 4650: 0XB8000508 error Code

  I get an error code on the front screen of my printer, 0XB8000508.  I'm not finding it in one of the forums.  I can get it to go away by turning the printer off and then back on.  But it has happened twice now.  Can you give me some answers as to what is this error and how to correct?

  Hi gawright59,

  I'm sorry to hear that your printer is getting an error code.  Here is a document that presents several of these errors and describes how to reset the printer when they occur.  http://support.HP.com/us-en/product/HP-OfficeJet-4650-all-in-one-printer-series/5447930/document/c00489814/

  There are several error messages that come from the printer and there is no definition of what each of them average.  It is an indicator of an internal error in the printer State.

  As you can see from the document - reset of the printer is the only step of troubleshooting for these errors.  If this error persists, you may need to replace the printer.  If the printer is under warranty I would recommend that you contact HP customer support (the link is in the above document) to set up an Exchange.   If the printer is out of warranty - continue to reset it for as long as retrieves the unit.  You can start shopping for another printer.

  I hope this helps, and I hope that the error appears again.

  Jean

• HP Officejet 4632: hp officejet with an OXC4EB827F error code 4632

  I have a hp officejet 4632 with an OXC4EB827F error code and does not work, also the power button blinks continuously.  Tried the reset how to print HP and doctor Scan and it did not help, there is no response from the printer.  Any help would be apprciated as two years out of warranty.

  Hello!

  Welcome to HP's Forums a great way to get help.

  Thanks for your post. I see that you have a problem with your printer "HP Officejet 4632" that gives you an error message "OXC4EB827F".

  It looks like a hardware problem with the printer.

  Please try this link on the HP forum is the author of X-23 an HP Forum Expert certified. There is a link for the same series of the printer, but not the exact model of printer.

  Link:

  http://HP.care/2bP97Dx

  If this fails, contact HP Technical Support for your printer using this link service:

  http://HP.care/2bGzo6g

  I hope this helps! Let me know how it goes.

  Take care and have a nice day.

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• OfficeJet 6500 E709n: Error Code 4, [(3,14,0)}]

  I recently updated my Dell computer, but I'm still using Windows 7.  When I try to scan using my OfficeJet 6500 I get an error message immediately: "problem of access to files and resources on the computer.  Try the following steps.  After each step, try to scan the image: - restart the computer - reinstall the HP Photosmart software supplied with the camera, error code 4, [(3,14,0)}.] »

  I followed these steps several times but also reinstalled the whole full functionality of the software and the driver OJ6500vE709_Full_14.    I also installed Photosmart Essential 3.5, although I do not think that he should never before scanning.

  I uninstalled all associated HP OfficeJet 6500 products and reinstalled everything.

  When I used HP Print and Scan doctor to help out, everything seems to work properly.  I was finally able to scan a document ('test analysis') while the 11 steps of printing HP and doctor Scan.  Hiowever, as soon as I tried to use the HP Solution Center application to scan a document, the same error messages came.

  I am confused at this point, given that the doctor of the scanner helped me successfully to a test analysis using the normal HP Solution Center to do the same thing is not.

  Thanks for any help!

  I just re-read one of the earlier posts about a similar problem and noted the suggestion of the Expert HP to run CCleaner in the framework to get the software cleaned.  I just (belatedly) followed that advice and voila!  Everything works fine!

  Thanks for the earlier solution that helped me solve my problem.

• OfficeJet 7500 E910 model: 0x61011bed error code

  0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

  I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

  I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

  An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

  Hey @pauledinger,

  Thanks for getting back to me on this subject.

  Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

  After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

  If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

  Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

• HP OfficeJet 4650: How should I treat the error Code 0 x 80240017?

  Tried to install an update and received this error code.

  The steps of troubleshooting in the post here by @Rainbow7000 can help solve the error 0 x 80240015 after an update on your Officejet 4650 printer.

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• HP Officejet 6500 more: Office jet 6500 more error Code 0 < 61011bec

  Switch on my HP Officejet 6500 more displays error code 0<61011bec.   does="" anyone="" know="" what="" this="" code="" means="" and="" what="" fix="" there="" is="" for="" it="">

  Hi RnRMusicMan

  Thanks for your help and the URL of the video.  The part ony of the video, which I have not tried is remove the duplexer and see if there's anything wrong with that part of the printer.

  Looking a little further.

  Bravo and thank you for your suggestions.

• What is the fax 346 error code? OfficeJet 6500 a, Windows 8

  Is there a list of fax error codes and what they mean?

  There is a document with a list of the fax error codes located here

  It provides an explanation and a general troubleshooting for each error code, as well.

  I hope this helps.