HP officejet 4630: hp officejet 4630 stuck in closing, flashing, will not remain. Unplug/plug, same thing again

Similar Questions

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• OfficeJet 4650: Extension of the tray will not extend

  Hi all

  I recently bought an OfficeJet 4650. After printing the first time, I pushed the tray, and now it will not come back.

  Any advice or fixes?

  Thank you

  Ty

  Welcome @ty_warman,

• HP Officejet 6200 all-in-One series will not be printed. I get the message that the spooler is not connected.

  I have a HP Officejet series 6200 all-in-One that will not print. I received the message that the spooler is not connected how to fix this problem? Thank you. Margaretjc

  Moved from feedback

  Original title: impression of the printer

  Contact HP support.

  CrystalBall © also SEZ...

  If it's a computer with Win7 with IE10 installed, have supported HP make you that your printing software currently installed is compatible with IE10 (yet). [The chances are that it isn't.]

• OfficeJet Pro 8000 double-sided printing will not respond to the control software #2

  Win XP Pro SP3

  OfficeJet Pro 8000 Wireless

  Does anyone know why Officejet Pro 8000 had control of double-sided printing, removed from the spec software?

  Does anyone know if there is a printer of this type which will respond to such control?

  UPDATE!

  ----------

  This printer is now works very well with total control on duplex printing. But how did this happen...?

  Two things have changed - well, maybe three.

  But first of all to mention another very annoying problem: wireless printer to my network connection always collapsed which was a double nuisance (23/06/2016 see also installing the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0)

  The road to happiness... I've finally updated my PC to a laptop HP Win7 (there is a problem with the laptop, but that's another story...)

  During the process of setting up laptop, I had to set up the network and add the printer. In between aid was a FAQ something like "the wirless connection drops regularly." What interested me.

  The fix was so simple - mychosen IP address has always been in the DNS range which was probably not very smart, but I didn't know any different. No one had ever mentioned before.

  The idea is to select an address in the static range IE outside the DNS. So I took a number x.x.x.249 and bingo!, a solid and reliable connection that is always there.

  Given the new laptop for download the drivers again. What went well and of course, the new machine is much faster.

  Anyway after a few tries, much to my delight I discovered that two-sided printing worked with auto rotation if I check the box. Printing a document like that I would see in portrate (horizontal spine) and read down the two pages, turn to the next page and the same thing at the end of the document. Or, if you use the rotation of non - normal mode - the printing orientation is 'normal '.

  It's a shame that it was necessary to buy a new laptop with a new o/s just to discover the problem by chance...

• HP Officejet 6500 E709n Console lights flashing & is not printing

  HP Officejet 6500 E709n stopped working yesterday and almost all of the lights on the console keep flashing continuously.  I get a message on the display to turn off, then turn it on but it still does the same once I do this.

  I have sought and found how to use # and 3 keys for a partial resets when you plug back in the power supply, but after I did it is still the same as before?

  I unplugged the power supply and all the rest and sit all night and this morning it did the same thing.

  Is it possible to do a complete reset instead of a part of the console?

  Thank you

  Ken

  OK tried to edit the post previous to add to this, but has not see a button "Edit"?

  So I got the printer Open as when you change cartredges and noticed that the print heads has not moved at the Center as usual?  Tried moving the print head with my hand and he moved only about 1/4 "back and all of a sudden the print head moved to the center that he assumed?  Closed the top and crossed a calibration and then printed that and now it works again.  Go figure!

  I guess that's a mechanical and electrical/electronic problem rather than something.  I looked and didn't see anything wrong with gears and stuff on top so it can be one problem somewhere else.

  Ennywho, I will continue to use it like that too long it will work.

  Thank you

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• Install Flash gets stuck on 35% and will not go (Mac Yosemite)

  Hi all, I posted my problem last week on the set of evil I think! and get nay answers so I hope that will be had better luck here :) I always had a Flash on my Mac (Yosemite) always up-to-date without problem. He said, today, I need to update so clicked the button install and used but it keeps stuck around the scene of 30-35%. I followed the steps on Adobes help pages, tried to install Flash and then re - install, but it keeps doing the same thing! Any ideas on what it could be is stop?

  It seems to me graduating from mining works, I went to the Apple Web site and found this link, the installer DMG?  You could not say how much, but it worked Adobe Flash Player Distribution. Adobe

• OfficeJet Pro 8500 a: Officejet Pro 8500 has more ADF will not work

  like others, I have this problem.  In fact I do not use the ADF very often and this kind of ignored her, but today, that I needed so decided to try to fix it.  I tried most of the fixes here and the first did nothing, but trying to look at this, I decided to put the paper in the ADF, then open the cover and look to see what happened.  My God, he started work.  I let go a bit and then started to lower the lid.  Heck, he stopped.  Essaye tried again, stopped again that I dropped the lid.  Did that a few times and then being qualified professionally I have the fix engineering, a slight slap on the far side of the adf, as on the back of the printer.  Now, my God, it was only half an hour, but the thing works.  Put three leaves there very well.

  If my thoughts are that some switch or sensor is loose or slightly stuck somehow, and that's the question.  Looking at what others have done, I epxect that they opened and closed the lid several times, because it a bank in the meantime or in the process, and perhaps it's her.  Probably HP guys could tell us what it is?

  Hello @billfern,

  I understand that you were familiar problems of automatic document feeder on your HP Officejet Pro 8500 has more e-All-in-One Printer and after trying to solve the problem, you have found that when you lower the scanner the paper process would stop. I'm happy to hear that you were able to solve this specific problem by giving a bit of a slap to the printer. This certainly isn't a standard troubleshooting step, but one that I saw set a number of different problems!

  In your case, I agree that there is a sensor or roller conflict occurring which is at the origin of the book of power question. This may be due to a defect of the real hardware or a programming problem. In all areas of document feeder, it is not so simple. There are many variables that can affect the document feeder Assembly. Some problems occur after crossing the media statement incorrect Assembly or an overload of the Assembly. Other problems occur if a part in the tray is physically broken. And some points can be caused by a programming problem. However, in all cases, if the charger is faulty a replacement of the entire unit would be necessary that the tray is not a replaceable part.

  It is never a bad idea to update the programming on your machine. Even if your specific Officejet works at the present time, I would recommend sending the last update of the Firmware to it. You can download and run the update of the Firmware by clicking on here.

  Thank you for joining the Forums of HP Support!

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• How is my scanner HP Officejet Pro 8500 all-in-one will not work on Windows 8?

  I just upgraded to Windows 8. My HP Officejet Pro 8500 A910 all-in-One printer works fine, but the scanner won't. I get an error message that says: cannot find the scanner. What can I do to correct this situation? HP has a driver that works with Windows 8?

  Did you uninstall this printer before the upgrade to Windows 8?

  If not, then I uninstall the software for the 8500 A910 and reinstall with the drivers up to date.

  The link here for the driver for the 8500 A910 page has e-all-in-one

  You can also get drivers for HP printers in Windows 8 by using the HP printer installation wizard.

• OfficeJet pro 8500 a: 8500 has will not stop printing

  immediately after setting up and installation of my 8500 it began printing a page with only the fraction 1/4 and a smiling face in the very top left of the page and that's all it prints, one after the other, again and again, and do not stop. If I have to cancel the printing of the touch screen, it stops the current print but restarts printing again shortly after.

  I sent a test page (page has shown in print queue), but I won't stop printing the page of fraction and smiley face.  the work queued print ever.

  There is no error before, after or during the printing of this page.

  Welcome to the HP community @gemini570,

  I understand your Officejet 8500 has constantly prints a page with a smiling face in the upper left corner, and I wanted to respond to try to help.

  Please, start by connecting your PC to the print and scan doctor and choose "print trouble." This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  You can also check to see if you have Web Services enabled on the front of the printer and try to turn it off to see if the pages stop printing on.

  If the above don't help, try to uninstall the printer software , restart the computer and run the HP printer install Windows Wizard to install the printer.

  Another idea that comes to mind, would be to try stop and start the print spooler:

  1. click on start
  2. type 'Services' in the search field.
  3. open SERVICES
  4. at the bottom, click "extended view.
  5. search for the print spooler
  6. right click and choose Properties
  7. Select Automatic from the drop-down list, close the window
  8. right-click Print Spooler and select 'Stop', wait until it stops and then again right click and 'Start '.
  9. close out Services and try your print.

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  Let me know the results!

• HP Officejet Pro L7680 All - in - One will not print black

  Original title: HP Officejet Pro L7680 All - in - One

  I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

  Hello

  This forum is for comments on the Forums for answers and you should ask at your
  questions in the Windows Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  It also helps us to help you if all the useful information.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==============================================

  In this case you should check with HP Support, their documentation online and drivers,
  and ask questions about known issues in the forums of HP.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.