HP Officejet Pro 1150c power error "function select".

Similar Questions

• Help HP OfficeJet Pro 1150c cables

  Hello

  I just got this new but all-in-one wireless,

  can I connect it via the usb port on my laptop? What should I buy?

  need help please, I'm a good model

  Message edited by hel on 09/09/2009 11:51

  Hel says:

  I just got this new but all-in-one wireless,

  can I connect it via the usb port on my laptop? What should I buy?

  The Officejet Pro 1150c is a fairly old printer, it was originally released with WIndows 3.1 and Windows 95 drivers a decade or more.  You can download the manual here.  The printer needs an IEEE-1284 parallel connection.  The best cases if your laptop has a parallel connection are to use a parallel cable IEEE.  If your laptop is not a parallel port things are more problematic.  Depending on your operating system, you can get a USB cable IEEE-1284 converter and make it work.  I have not seen a lot of reports of success using cables lconverter USB-parallel with Vista, XP seems a little more usable in this regard.

  If you are using Vista, you will probably be able to print using the Deskjet 500 c drivers into Vista.

  Kind regards

  Bob Headrick, Microsoft MVP printing and imaging

• More OfficeJet Pro 8600 - Apps error - "connection error".

  Hello

  Newbie question maybe, but it made me a bit puzzled.

  I have a HP Officejet Pro 8600 Plus on a wired connection to my router/ADSL modem from the sky, using a static IP address.

  When I go in Apps he pulls the bottom of the list of Apps installed OK, but when I select one from the printer control panel it trying to connect, and then generates an error.  I don't see a place that I have to configure anythign.

  I have a woerkign hp ePrint Center account, ePrint works (finally!) when I send docs to my address email eprint, and also via Google Cloud Print and Apple AirPrint.  While it's not ruining my life, I would like all the functions of the printer to work :-)

  I can print to a network folder, as long as it is on a PC, even if my SIN, it will not print to for some reason, but I guess that's another question :-)

  Any help is greatly appreciated!

  MF668

  Hi MF668.

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Access to the IP of the printer through the web browser on your PC.
  3. Click the network tab.
  4. Under Wired click IPv4.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• HP Officejet Pro K8600dn: officejet pro k8600dn power, which takes up and cover open lights up on

  My Officejet Pro K8600dn shows the lights of the next panel: Power On, which resumes and cover open. No mention of this flaw in the user manual. Cannot print at all. Attempted to trigger the switch cover, but to no avail.

  Dear Rock_Doc,

  Please follow the steps in this document depends on the lights that show your all-in-one:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-K8600-Printer-series/3434445/model/3434446/document/c01289436/

  I hope you find it useful.
  
  Greetings.
  
  * I am not an employee of HP, my work is voluntary.
  
  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• OfficeJet Pro K5400 - loss of functionality in Windows 7

  Since the upgrade of our PC from XP to Windows 7, we have experienced a huge loss of functionality when printing our of Officejet Pro K5400 (cannot print to the edge of the pages, can not specify substrates, change the resolution, etc.)

  Our HP reseller from whom we bought the printer actually just washed their hands of this issue "that's the way things are, HP are better than many other manufacturers to provide drivers for the existing hardware, update of the operating system".

  It seems ridiculous to me that HP will feel it is reasonable to not continue to support relatively recent kit parts that work well - just another example of built in obsolescence? Is there a way we can restore the missing feature? How about you, Vista driver - is that have relevance?

  Come on HP - standing behind your product and we restore the characteristics that we need to make this useful printer once again!

  This printer driver must be included in Windows 7 already.

  Here is the document that I found for your printer when I was looking for the drivers:

  http://support.HP.com/us-en/document/c01874725

• OfficeJet pro 8500 a: error Surface pro 3 when printing on HP printers

  I bought a Microsoft Surface Pro 3 to replace my laptop. I loved except that I can't have the network printer as my old laptop. Because I'm stuck using your printer app, it has been a disaster. I get the error messages. The application can not find my documents, and then I get the error messages. Documents are partially printed, or I get a message that the printer is offline. Y at - it a patch or fix for this problem?

  Hello @manon1,

  Welcome to the forums of HP.

  I understand that you are experiencing problems printing from your Surface Pro 3.

  I would like to help.

  What I learned from the series Surface Pro, is that they are running a full version of the windows operating system.

  This means that unlike the RT versions, you can install the software.

  You should be able to install the same software that you can install on a laptop or desktop computer.

  This would make it so that you don't need to use the application.

  HP Officejet Pro 8500 has e-All-in-One Printer - A910a - software & drivers

  If I chose the wrong model of 8500 a (there is at least 3) Please try the HP printer install wizard for Windows

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• HP Officejet Pro 8600 won't allow selection of the type of encryption WPA2_PSK.

  HP Officejet Pro 8600 e-All-In-One-Printer-N911a

  MacBook Pro: Mac OS X 10.6.8

  Wireless Netgear WNR3500L router

  Purchase printer: 09/12/2011

  Install the CD corresponds to Mac download version of the software from HP website.

  Initial installation of the software with the CD went well without any problems. Next step installation CD: printer manually the configuration via USB

  acquired cable router wireless, but the HP software screens "Encryption Type: WPA_PSK" there is no other choice available.

  My router is configured to WPA2_PSK (AES). I downloaded a manual from HP that says this printer supports WEP, WPA and

  WPA2. This printer supports WPA2? If so, what should I do to select WPA2_PSK?

  Try connecting the printer to your network from the front of the printer: Setup > network > Wireless Setup Wizard.

  After that, run the software that finds your alread of printer on your network.

• OfficeJet Pro 8500 wireless Error Message Invalid drive F:.

  When I run the install disc for the Officejet Pro 8500 wireless, or through wireless or USB, when installation gets to 23% I get an error message not valid drive F: /. I have tried everything to fix this problem and searched many hours, but none of the fixes worked. There is no F drive on the laptop (older hp Pavilion). In fact, there are only the drives C and D. I went to the computer and manage to ensure that the drive is called straight, and it is.  There is nothing plugged into the USB ports, when I do the installation. Any suggestions before I pull all my hair? Thank you!

  Open the command prompt, and then type this:

  subst F: C:\

  Re-install the software later

• OfficeJet Pro 8610: Lockout admin functions

  I managed to me lockout admin on my Officejet Pro 8610. Could someone help me to reset the name of user and password, or return to the settings by default so that I can take back control of my printer?

  Thank you.

  Best regards
  FlyingHorse

  Product name: HP ENVY dv7-7233nr Notebook PC
  Product number: C2N68UA #ABA

  Hello @FlyingHorse,

  Thanks for posting in the Forum from HP Support.

  I see that you need a reset manual full semi * for your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.

  Check your Inbox - I'll message you private information you must regain control admin your 8610. * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information on custom addresses ePrint, click here.

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Have a great day!

• OfficeJet Pro All In One 6835: Officejet Pro 6835 printhead error

  My Pro Officjet 6835 all in one shows a printhead error.  I installed new ink cartridges about 2 weeks ago, and it printed fine since then.  I tried troubleshooting.  When I try to "Clean printhead" computer, it simply says "printer is busy".  When I try to clean the printer configuration menu, it shows that it is cleaning for about a half second and then returns to the maintenance printer screen.  On one attempt, it seems to work, but after 3 hours, no there was no change or action.  I have reset the printer (unplug the unit for more than 60 seconds - of the printer and the power outlet), off several times and contracted cartridges to attempt to clean the print head.  It doesn't seem to be removable, so I'm stuck.  I'm currently under Mac OS X Yosemite 10.10.3.  I really need to be able to print several documents as soon as possible.  Help?

  Hi @customerHI

  I would advise to call HP telephone support. The print head is not replaceable, and you will need for the printer needs to be replaced. Can you please post back to let us know how you go?

  Thank you

  Ciara

  Americas & Asia

  http://support.HP.com/us-en/document/c04839288

  Europe, Middle East, Africa

  http://support.HP.com/us-en/document/c04839289

• OfficeJet Pro 8600 Premium error paper size does not match

  I try to print an envelope #10 that I printed several times in the past, but today I get the error that the detected paper size does not match.  I print on MS Word with the selected for the #10 envelope paper size.  I loaded the envelope properly.  Why is he not feel today when it was fine yesterday?

  Hello

  The application, go to Printer preferences. What size and type of paper is selected here?

  You have restarted your computer since yesterday?

  Thank you

• HP Officejet Pro K8600: Power light + resume light flashing after printing only one Page

  After trying to print a document of several page, the printer produced a page and then the power light and the resume light (page feed) Flash. I also tried to print multiple copies of a page, but that leads to the same result.

  I can get the lights extinguish by turning printer off then turn it back on. But it will always print that one front page the same lights begin to Flash. I did six times in a row just to print a six page document.

  I went through all the steps in troubleshooting HP software. Not like searching for cleaning print heads, re-seats cartridges, etc., fragments of paper. Nothing seems to work.

  @Bob_Headrick

  Thank you for your response. However, none of the suggestions could solve the problem. ALTHOUGH the light guide troubleshooting that you provided was close to the solution.

  I came across the solution by reading the PDF manual for the printer. On page 77, it describes the power led + resume light flashing. One of the causes for this using EXPIRES of CARTRIDGES of INK, CARTRIDGES RECHARGEES or NON HP CARTRIDGES.

  WARNING: It is important to note that if your printer is still under warranty, DO NOT DO THIS. HP notes in the manual using this substitution can void the warranty against damage caused by the use of faulty ink cartridges, obsolete or not allowed.

  SOLUTION:

  While the power light and button resume flashing, press and hold the power button and press the button repeat 3 times. This replaces the "apparent" internal error message to use the cartridges you have installed. It may also cause a print cartridge alignment page.

  MY OPINION:

  It is important to note the HP cautioned against it, it FIXED MY PROBLEM IMMEDIATELY! I know that the cartridges that I have installed are in agreement. Like many HP owners out there, I take advantage of sales and have stored on cartridges. I guess some may "expires" before you install it. In my view, the idea of "expiring" cartridges also somewhat falls into this column to "How can do us buy more ink?" What kind of market we create where it's cheaper to buy a new printer than to buy a new set of cartridges/toners? BUT it's a slippery slope... let's not go there.

• OfficeJet pro 8600 more: HP officejet pro 8600 more - error B86F3A7C

  Our printer is locked with all lights flashing. Or turned off, it starts good then shows the errornumber pasted below - and starts to Flash again. How to return to the normal operating mode?

  

  Hello

  Please try the steps below...

  1. While the printer is on, remove the ink cartridges and the print head.
  2. Unplug the power cord from the back of the printer.
  3. Power to the router.
  4. Connect the power cord to the printer.
  5. When you are prompted, install the print head and ink cartridges. Verify that you set the print head latch.
  6. Wait Unitll the printer is silent.

• HP OfficeJet Pro 8500 A909N: OfficeJet Pro 8500 power Module

  The printer does not turn on, the power adapter light flashes on and outside, light sweep under the glass of the scanner blinks in sync with the light adapter and the power button does not work. When the power cord is disconnected from the printer, but remains connected to the AC, the light on the adapter continues to pulse.  I was wondering if this indicates a failure of the power adapter or a more serious problem with the printer itself.

  Skulker wrote:

  The link you provided describes the problem experienced, but unfortunately the solution wasn't able to resolve the problem. When the module is plugged in AC, the light flashes on and off for the module seems to be defective, perhaps victim of a power surge or slump.  Thanks for your help.

  OK, so change the power adapter.