Help HP OfficeJet Pro 1150c cables

Similar Questions

• Please HELP WITH OFFICEJET PRO L7580 - HP Imaging Device Software Funstions for Windows Vista

  I have a HP Officejet Pro L7580 - connection with laptop Dell and Windows Vista PC.  I did not have printing problems, but has been unable to fax or scan.  I uninstalled the software and put back in place to make sure I had the latest software and compatibility for Vista.  I can now fax but when I try to scan, I get the following error: No analysis Options - refer to device documentation to troubleshoot issues - only, there is no documentation of the device...

  When I went to the HP site to install the latest version of the software, I've installed the full functionality & driver software... guess I thought that this would have everything that I need, but it seems that the software of HP Imaging Device functions was not installed...

  If anyone has had this problem and what should I do now?  Thanks much for any help you can offer!

  Please texasgirl try this:

  http://support.HP.com/us-en/document/c04134999

  Good luck.

• Compatible driver for a HP Officejet Pro 1150c for Windows 7

  Hi I want to install the Unit mentioned above to my laptop into a USB port, but it is not compatible Windows 7 can you help me

  Hi Pieter,

  Please refer to this link to download the drivers for Windows XP and install it in compatibility mode for Windows 7.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=12049&prodSeriesId=24382&prodTypeId=0&TaskID=135&swLang=8

  Check this link to find out how to install drivers in compatibility mode for Windows XP:

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Please get back to us with the State of the question.

• HP Officejet Pro 1150c power error "function select".

  Hello

  I just bought a c 1150 (second hand), when I turn it on the green button lights up, the display shows the initialization, then the green light turns off and the screen comes with "select the function" none of the buttons does not work and the printer does not respond to something, it seems not be commissioning at all (can't hear mobile cartridges etc that you would normally expect). "

  Can anyone help?

  Thank you

  Ellie

  Problems like this are normally caused by the lack or power.  When this happens, all you can do is try to reset the printer.  The document following the link will guide you through what you can do to try to get the printer to answer.  If this does not work, you will need to replace the printer.

  The HP printer does not turn on or respond

• HELP, hp officejet pro 8600 increased, it appears it still is "not connected".

  Just set up this printer and can't seem to get rid of the message "not connected". have in fact had a hand connected green check mark once but he disappeared and I can't get it back.

  Thank you

  Hi there, are you referring to the status of the printers in your account ePrintCenter, as in the image below? The printer give up the connection to the network local WiFi or a problem with your internet gateway (router) maintain that a reliable connection to the internet could be possible causes for what you see. Check out this support document for possible solutions to the problem of the printer not to maintain its http://support.hp.com/us-en/document/c02817031 wireless

  Feel free to post if you are still having problems. All the best.

  

• Scan more OfficeJet Pro 8600: Officejet Pro 8600 Plus resize problem

  With the help of Officejet Pro 8600 Plus to scan documents on computer in PDF format.

  I'm tring to scan a document that contains very important information just at the foot of the page, but when the scanned document appears on the computer screen, I see that he has not captured at the bottom of the original document.

  I can work out how to resize the document to the copy function, but I can't find an option to resize for scanning.

  Nobody knows the answer to my woes?

  Thank you for your help.

  Hello

  Thank you for using the forum.

  You can choose the scan size, example as shown.

  

  In addition, these videos may be useful for you:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  Hope that helps.

• HP OfficeJet Pro 8000 Wireless: Can I get some help here? Yellow ink will not print - HP OfficeJet Pro 8000 Wireless

  No matter what I do, ink yellow does not print, or stops at halfway printing on the page. I use genuine HP cartridges. There is a lot of ink - in fact, I just installed a new cartridge in the case where a previous (almost complete) was defective. No change. The pipe is not pinched. I flashed the firmware more recent and installed all drivers and utilities updated. I have cleaned the print heads over and over again and even took and cleaned according to the instructions.

  I think it was a sign that the printer is worn EXCEPT - just a few months ago, magenta and black stopped printing. These are the opposite printheads. When I uninstalled every bit of HP software I could find, the printer back to normal!

  The only thing I did not - it is the HP Toolbox argues that it is impossible to establish two-way communication with the printer. The patches for this involve get under the desk to play with the power cord and USB cable (even if it is a wireless printer), and my arthritic knees that make a very delicate operation. Two-way communication IS enabled.

  I'm about to start crying. I fought with this market a week, when the yellow all of a sudden went - once again, * most * of the time, but sometimes it prints to maybe an inch of the image before disappearing. Help!

  Hi @Echo2,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet Pro 8000 printer with a Windows 7 computer and all of a sudden is not printing yellow ink. I would like to help with that.

  Here is a document of support for the print quality problems - Troubleshooting print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet Pro 8600 continues to read printer off line even if hard wired - help!

  I'm unable to print on my HP Officejet Pro 8600.  It will not print wireless so I wired with an ethernet cable.  Printer says offline.  What to do next?  Help, please!

  Finally got it working today.  My son-in-law the fixed.  He said, he said offline, because the network was not see an IP address from the wireless printer.  Basically, he opened the printer HP Officejet Pro 8600 dialog box and clicked on add a printer and re-installed.  Thanks a lot for your help.  I hope this can help someone else in the future.

• OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

  I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

  I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

  Help, please.

  Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP Officejet Pro 8600 Plus stopped Scan of the computer... Said the computer could not be found. Help!

  Hello

  I've been enjoying our HP Officejet Pro 8600 more MFP for a year now.

  Analysis of the it function on our machine no longer works. It indicates that the computer cannot be found. I used this feature all the time in the past.

  I can acquire a scan from an application, like Photoshop and I can scan to a removal storage device, but I can't use the computer Scan, and I really liked this feature!

  A few days ago, our computer has been infected by a virus. A Norton agent could succeed in eliminating it. Do you think this could have disabled the feature computer scanning?

  How can I get the MFP to recognize my computer again? I've looked up and down and impossible to find the solution for this.

  Thanks for any help you can provide!

  (With the help of a HP PC with Windows 7 64-bit)

  This solution fixed my problem:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/scanning-function-does-not-work-but-able-to-print-from/m-p/3604099/highlight/false#M83505

  Thank you very much!!

• HP Officejet Pro 8620: Which usb cable I can buy?

  Plan to buy a HP Officejet Pro 8620.  Description indicates that the USB cable is not included. Which cable USB should I buy?

  Hello:

  You need a cable like this...

  http://www.Amazon.com/ReadyPlug%C2%AE-cable-OfficeJet-printer-A7F65A/DP/B00L8OZL8S

• Help, please! OFFICEJET PRO 8600 & OFFICE JET PRO X576DW MFP INSTALLATION/UNINSTALLATION ERRORS

  I desperately need help and I am so sorry to bother someone, but I just purchased the OFFICEJET PRO X576dw and because I'm a model, I just unplugged my OFFICEJET PRO 8600 without "Uninstall" of the software.  I never knew this could cause a problem with the installation of the new software, printer and I can bet only that is the problem.  Bottom line, I don't have any kind of assistance on the old printer and after much ado and very helpful with the representative of HP on the cat on the installation of the OFFICEJET PRO X576dw, he recommended that contact someone on the side of support OFFICEJET PRO 8600 with whom I have no support agreement; Therefore, my indignation for your help.  I have a deadline almost a large amount of printing for my church and I just can't find anything in any of the online support that has helped me.  I have now no print capability.  I do, however, a nice message as to why I can't complete the installation process for my new printer; OFFICEJECT PRO X576dw, but of course, it makes absolutely no sense to me - the computer iliterate dummy which is only trying to help those who are less forturnate; hard to believe that everyone is worse than me when it comes to computers, but it's true.  I inserted the silkscreen of the error I get.  The first is what I get when I try to uninstall OFFICEJET PRO 8600 and the second is what I get when trying to install the software of the printer OFFICEJET PRO X576dw.  If there is someone out there who is willing to help me, I will be eternally grateful.  Thanking you in advance, IM4GLTR1

  1...

  

  2...

  Please, please, I really need help.  I am eternally grateful.

  IM4GLTR1

  Thank you.

• 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

  I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

  Yes, you can.

  The 8600 Officejet Pro may be installed in different languages.

  I provide and example of this:

  • 
  • This screenshot is when you select the paper size for copying:

  And another example:

  • 
  • It is the main window of the façade.

  * Don't forget to click on the stars KUDOS say thank you

  * also click on the Solution button if your question is answered.

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi