HP OfficeJet Pro 8610: HP OfficeJet Pro 8610 PILOT ONLY!

Similar Questions

• OfficeJet 8600 software works only with Windows 8.1

  Since I've upgraded to Windows 8.1, I can configure is no longer my printer using the HP 8600 tools.  When I run the software "Officejet Pro 8600" the only options I'm offered are connect a new printer or add more software. I tried to install the full software features several times and again I do not have the configuration tools.

  Printing and scanning to network folders still works, but I need to reconfigure the system. How can I get the software to run on Windows 8.1?

  MikeE67,

  I have looked into this for you if the scan to network folder will change by uninstalling the printer software, it will not. That information is stored on the 8600 and not in the software, the software only allows you make changes at once that it is configured.

  Thank you

• Satellite Pro L300-1AQ only to charge the battery while the phone is in use

  I have a Toshiba SP L300-1AQ.

  In the last month we started having problems with it quit unexpectedly, even on power outlet.
  This morning I used it for about a half hour. When I started the battery level was 39% full, so I plugged it into the outlet. The fire area on the front of the laptop came and taskbar in Windows icon showed it was plugged and load (battery light was orange).

  After half an hour, I checked the battery and it was down to 16%. I turned down the brightness of the screen to try to reduce energy consumption, but less than a minute at the level of the battery was down to 15%. The toolbar icon and power lights both still power showing tasks. The power adapter was cold to the touch. I expect that it is hot. It seems to me that the power adapter does not provide enough power to run the laptop and recharge the battery. If the laptop is in sleep mode, the battery may charge.

  We need a new power adapter?

  Thank you

  Nigel

  Hello

  It's really hard to say what the reason is but first of all, I think its hardware problem and not software related.
  Maybe the card mother doesn t charge battery problem more or the AC/DC adapter is defective. So can you test another adapter AC/DC to a friend for example? It would be interesting to know because if an AC/DC adapter works it seems to be a problem with the motherboard.

  I don t have Satellite Pro L300, I only Satellite L300 but it works really well and I can t notice a problem with the battery charging. It s all ok again :)

• I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  check your directory program files adobe > first pro cs6 > first pro.exe file.

  (restart the cc app will probably also work.)

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• I have the Creative suite premium edition 6 teacher installed on a mac and I want to install the Premiere Pro and Photoshop ONLY on a separate macbook. How can I do this?

  I have the Creative suite premium edition 6 teacher installed on a mac and I want to install the Premiere Pro and Photoshop ONLY on a separate macbook. How can I do this?

  Download the CS6 Setup file and when it is executed on the separate machine choose to install only the programs that he has wished.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  I have a second clip 24 I have stratified in Ps and when I import the psd in Pr THE SEQUENCE IS STILL ONLY 10 SECONDS!

  How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (certainly that's an AV class where I learn just PR.  "But I can learn VERY QUICKLY!)

  Thanks for your help.

  -OSXniCKels

  Just in case I wasn't clear in my last line ' just click-and - drag on the tail of your.» PSD to set the desired time,' once you have imported your. Just PSD (for example, images), you can drag in the timeline panel, click and drag on the right margin (the tail) and stretch his time because it takes.

  Now, if you have imported as a sequence, open the timeline of the sequence and do the same thing.

  Normally, I will put my Edit > Preferences > again I think will be applicable, make my Import, and then with the Info Panel, just change the duration in office.

  Good luck

  Hunt

  PS - Welcome to the forum.

• All-in-one Officejet Pro 8610: print only every other envelope

  The printer ignores the other each envelope.

  Any suggestions?

  Thank you

  Mark

  Hello @Markb60000,

  Welcome to the Forums of HP Support!

  I understand that your HP Officejet Pro 8610 e-all-in-one printer has problems when printing envelopes from your Windows 7 computer, as every other envelope seems to be ignored during the printing process. I would like to help you today with this problem to print the envelope. Now, the first thing I did after reviewing your post has been watching the media specifications for your specific HP Officejet. Just to let you know, the specifications of following envelopes are supported:

  • Envelope weight and loading capacity in Tray 1 of your printer are as follows:

  

  • The following envelope sizes are supported:

  

  As long as you are printing on an envelope which is in the specific size and weight restrictions for your product, you shouldn't have any problem loading up to 30 envelopes in your bin at some point.

  To confirm that your envelopes are loaded properly can I please have you click here. Once the support document opens click the drop down menu to "loading envelopes. Please check to confirm that you load the envelopes correctly in your paper tray.

  • If your envelope printing problem persists after checking that your type of envelope is justified and that they are loaded correctly, can you please specify what type of program you use on your Windows 7 computer to print envelopes of.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• OfficeJet pro 8620: party only Officejet pro 8620 page impression

  We have the officejet pro 8620 couple. They print normally well, but we have difficulty printing a pdf with JPEG image file. all print them only the upper part of the page.

  but the file can be printed from MAC without problem.

  the file is also printed on officejet pro 8600 premium.

  windows player and firmware are updated.

  I guess the drive of printer for windows bug.

  Any clue?

  Hello
  
  Thank you for using the HP Forums.

  You are able to use other PDF program?

  If not, can you set it to 'Print as Image' parameters ahead and see the problem is solved?

  Thank you.

• HP Officejet Pro 8500: HP Officejet Pro 8500 ceased only printing partial page in pink only

  Printer was only print a partial page of the multi page document. Replace the printer cartridges. Has run HP Diagnostics and cleaned the print heads. Still no change. For priting only a small amount of test page in pink only. Also have cartridges removed and rehabilitated. Have restarted printer several times. Please notify.

  Hello @help411911,

  The Forums of HP is a great place to find answers to the questions/problems you may have, welcome! I see that you are facing some print quality problems when you print to your HP Officejet 8500. It is printing in pink only and partial pages. You have performed the steps in troubleshooting without success.

  1. When you performed the cleaning and printed the test page, have you seen all the colors on the page or is - this only rose as well?

  2. are you able to make a black copy?

  3. When you upgraded to Windows 10 you would update the software and drivers for the 8500 JO so?

  What does the HP print and Scan doctor find? I look forward to hear from you.

  You can say thank you easily by clicking on the ' Thumbs Up ' below!

• HP Officejet Pro 8500: Pro 8500 has only scan full page

  Hello, for some reason, my scanner is missing at the bottom 2 inches of the page when I scann sheet A4.

  Hello
  
  Thank you for using the HP Forums.

  Are you using the Scan software after installing the software with FULL?

  Otherwise, you can install the FULL features software?

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Once you have installed the sfotware FULL of features, start the Scan software.  Follow the settings below to scan your document.

  

  Hope that helps!

• All-in-one HP Officejet 8610: all-in-one HP Officejet 8610 prints only part of an image using photographic paper

  I have problems printing of photo paper. Pictures print correctly if printed on normal, ordinary paper, but as soon as I said that the paper is "Other Photo Papers", part of the photo is printed and I get a message saying that he had an impression of the error. In fact, it is said that he could not print even if the part of the photo prints.

  In this case, if I use plain paper to paper using this setting. Of course, I want to use for setting photo paper. In addition, change the quality of normal quality makes no difference.

  I tried to see if I could print the photo on photo paper using ordinary paper settings, but two pages are printed on: a bit on photographic and more on the paper.

  Help, please

  Thank you

  Hello

  Is the printer connected via USB or via the network?

  For the network connection, the following Microsoft fix should help resolve this:

  http://support.Microsoft.com/kb/3000461

  Please let me know if that helps, if not further.

  Shlomi

• HP Officejet Pro 8000: Deficiencies only in print in black at the same place on the page, enough new printhead

  Have run diagnostics and repeatedly cleaned print heads, calibrated etc, but still get breaks in the prints in black, in the same places, regardless of what is printed and on the entire page. Attached pictures show a print quality. Thank you, in advance.

  

  Thank you! It is a new printhead HP and this is the one. Contacted dealer today and I come to replacement/Exchange.

  Had read these articles, but wasn't sure if there was something that I missed.

  Thank you, again.

• iPad Pro without headphone only speakers

  I don't know what is happening with my speakers, my IPad pro suddenly for headset speakers. I have reset my Pro speakers and works of iPad and a few seconds later change the helmet, please help me!

  Hi LaloCh,

  Thanks for checking out the communities Support from Apple. I understand that you are having problems with the sound in your iPad Pro not coming through your speakers and only through headphones. I use my iPad all the time to watch movies, so I can understand how it is important to have the sound working properly.

  Since you've already tried some troubleshooting to get your sound work, I want to assure you that you have tried the steps listed here:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  If you have gone through these steps, the next step to try would be to reset all the settings on your iPad. If you have already tried this step, then you can skip to the next part. To reset your settings, you go into settings > general > reset > reset all settings. This does not erase any of your data (photos, contacts, data app), but you will need to set up some default settings again as your sounds, funds of screen, Touch ID & password, Apple payroll, restrictions, iMessage, etc.. You will need to also connect to your Wi - Fi network, so make sure you have your Wi - Fi password available.

  After the reset of all parameters, you can try to backup and restore your iPad via iTunes if you are still having problems. This will let you know if there is a problem with the hardware or software. After you restore the iPad, you'll want to set up the iPad as a new device and test it before restoring your backup (temporarily). You can find the steps for the backup and restoration below.

  The backup of your iPhone, iPad and iPod touch - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  See you soon.

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!