HP Officejet Pro 8630: Ethernet and wireless

Similar Questions

• OfficeJet pro 8500 a and wireless

  I bought this printer. My notebooks connect to this device wirelessly. but after a wile, they cannot connect to the printer. Seams such as wireless stops working although it light still burns. To resolve this problem, I need to connect the printer to my wireless again.

  Anayon with an idea of what the cause?

  Thank you.

  Hey butch,.

  RE: connecting your printer on the network, read this article

  http://support.HP.com/us-en/document/c02817031

  Do you receive a specific error message on the printer or the computer? More information would be great.

• OfficeJet pro 8630 + is not centered copy - printing and scanning ok

  Older than two months Officejet Pro 8630 (> 400 pages) - copies of plate or charger are shifted to 3/8 of an inch on a side. Printing from computers or scanning is centered.

  FDP1CN1416AR firmware version

  Using tray 2 by default. Tray 1 is used for printing the envelopes.

  Thank you

  I found that turning on/stop margin shift and turning on the margins by default button a few times eventually set the output to the centered normal copy.

  If the settings are now to original (shift off and default on) the printer now copies centered. Must have been a burp of firmware. If that happens again once I try a hard reset to clean.

  Thanks anyway.

• HP Officejet Pro 8630: Internet connection for printer

  Hello

  I recently bought a HP Officejet Pro 8630 all-in-one printer and currently it hooked to my computer via a USB cable.  Everything works fine.

  I want to participate in the program of alternative to instant ink HP Service.  To do this the said program brochure that I have my printer is connected to the Internet.  I have never made a connection like that.

  Currently, I don't have a cable modem wireless.  Do I need to have a cable modem wireless to connect my printer to the Internet?  If this is not the case, how can I connect my printer on my existing cable modem?

  My cable modem is: Motorola SURFboard of SBV5220

  Thank you

  Mark

  Hello

  Your printer needs to have an ethernet port in the back, where you can connect a LAN cable. You will need to connect a LAN cable to a free port on your current modem on the back of the printer - this should establish an internet connection.

  

• HP Officejet Pro 8630: Set up to scan

  Im trying to set up the feature on printer for analysis.

  I have an IPad & IPhone and can't understand how I can activate the analysis feature.

  I don't have a desktop or laptop computer.

  appreciate any guidance

  Thank you

  Hi @Fangers1,

  Thanks for joining the Forums of HP Support with your scanning application.

  I understand that you want to scan from your IOS from Apple to a HP Officejet Pro 8630 devices e-all-in-one printer. I would like to help with that.

  Scanning software HP is usually provided with the software that you install normally on a desktop computer or laptop, if you had one that is.

  HP AiO Printer Remote App is available on the App Store on the iPhone and iPad. The HP all-in - One Remote Printer is a free mobile application that allows you to print and scan wireless using the supported printers compatible HP web that is located on the same local network as your mobile device wireless.

  Here is a support document which can serve as a reference when you you install using the application - Mobile printing and scanning with HP AiO Printer Remote App.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet Pro 8630 - work of borderless printing produces blank pages

  Hello-

  On my HP Officejet Pro 8630, when I start a print job and select ' without borders on "print 3 or more copies, the first 2 pages of the print job, and then a blank page prints, followed by a good impression, followed with a blank page, etc. until that work ends.

  If I disable the option without borders, the job will print correctly without blank pages.  I tried printing from multiple computers and programs with the same number and have updated printer drivers / the most recent versions.

  I tried printing wired network, wireless network and USB all with the same result.  I've had the printer for less than a month.

  I use the printer for business purposes, and it is causing the major headaches!

  Thank you

  I solved the problem by selecting the Type of paper - HP Bright White... She has been set to the default value of plain paper.  I can now borderless printing correctly without blank pages.

• OfficeJet Pro 8630: Officejet Pro 8630 don't Scan to Email after move to new office

  We have recently moved offices and now we can not Scan to e-mail at work (he has worked great previously).

  We are on a wireless network at the office and I can print fine, but no scan to E-mail.

  I tried the settings via the web interface, I rebooted the router and the printer, I deleted all the accounts on the web interface and created a new, but it won't always work.

  Help?

  Hey @KBoyett,

  Welcome to the Forum from HP Support.  I understand that you are unable to reconnect the scanning to e-mail, using your HP Officejet Pro 8630 e-all-in-one printer.  I would like to help.  I have a few steps, you can try that may fix this problem.

  It is optimal that you have a wireless connection.  I do not recommend restoring the default settings of your printer to make sure that all old settings scan to e-mail are deleted from the printer.  Here's how:

  • From the front of your printer, press Setup
  • Touch Tools
  • Press restore defaults

  This will clear your wireless network, Web services, and other custom printer settings.

  Then, follow these steps:

  • Connect to your wireless network (run Setup under wireless settings wireless Assistant)
  • Tap the copy icon on the lower left below to enable Web services
  • If your webservices are enabled you can now configure your scan to e-mail

  There are two ways to Setup scan to e-mail:

  Method: use the scan to e-mail Wizard to set up scan to email

  Follow these steps to use scanning to e-mail Wizard in the HP software to set up the Email scanning function.

• HP Officejet Pro 8630: HP Officejet Pro 8630 printing problem

  Hello

  I have a printer HP OfficeJet Pro 8630 with two different computers connected on it. I have no problem printing from the computer that I use every day, but when I try to print from the other office, nothing happens. The second recognizes the printer and says it is connected, but it does not recognize the printer. In the meantime, I can turn around and print something on the computer to work immediately after I try to print on the other. If anyone has any suggestions, I would be very happy! Thank you.

  Hi @AdminGuy,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you have a HP Officejet Pro 8630 e-all-in-one printer is connected to two computers via a wireless network, the main one has no problem printing, but the printer is not responding to print jobs sent from the second PC. I would like to help with that.

  Is the PC that does not work with the printer to Apple or Windows computer, and what operating system is running?

  If it's a Windows PC, try to download and run the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please get back to me if you want.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• HP Officejet Pro 8630: HP Officejet Pro 8630 open on wifi connection

  I was told my new HP Officejet Pro 8630 is a connection open and unsecured and anyone can access it. How can I fix it? I'm the only one who uses this printer 99% of the time. My daughter print his phone is turned off, time once in awhile.

  Thank you

  Well not really. If the printer was wireless active Direct others may be able to connect, assuming they know the password. A simple solution, turn off direct wireless and don't worry in this regard. Now connect your printer as you wish, to a router wireless or USB cable.

• Office Jet 8630: OfficeJet Pro 8630 doesn't go to sleep

  I just plugged the 8630 to Win 7 (64-bit) machine via the USB cable (I disabled the wireless).  Everything works fine except that the printer does not seem to sleep regardless of the sleep setting, I chose.  The screen is always enabled.  The firmware is updated.

  Hi @Chrisk-K,.

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one HP Officejet Pro 8630 will not enter mode 'sleep'. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be a few reasons why this could happen, to help determine if it is a hardware or firmware glitch try the following steps below.

  I would like to do a hard reset to see if that will solve the problem.

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  • Make sure that the printer is connected directly to a wall outlet (do not use a hub or a surge protector). This ensures that the printer is full on and can help this situation. This ensures that the printer is full on and can help this situation.

  If the problem persists, unplug the USB cable to see what sleep with the USB cord.

  If the printer will not be still "sleep", I would try a partial reset first, and then the semi Full Reset if that does not help. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number appear

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Officejet Pro 8630: HP Officejet Pro not for me, but for my colleagues at print job printing

  My office just got an Officejet Pro 8630 and I was installed on our laptops. I installed the drivers on four computers, and it worked fine for three of them (except mine). Our office makes wireless printing and the printer is connected to the network. My computer is connected to the network as well. I did everything the same (to my knowledge) for download, so I am very confused. I was able to scan from the printer to my computer in PDF form. I restarted my computer and also uninstalled/reinstalled everything, but to no avail. When I try to print, it goes into the queue of print documents, it waits a few seconds and then goes away as if she had printed out correctly. Our old printer still works for me (also wireless, but an Epson) but of course we will be getting rid of this soon. Am I missing something?

  Hi @HMoyer,

  I see that you have problems printing of only the computer, but you can scan from the printer to the computer. I will definitely do my best to help you.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  If the problem persists, try the procedure described in this document to see if it will be useful. Wireless printer print a partial Page or fails to print all Pages in Windows 8 The Microsoft KB3000461 fix should help with this question.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• OfficeJet Pro 8630: Officejet Pro 8630

  Has anyone linked their HP Officejet Pro 8630 to a laptop to PC windows 10 via Blue Tooth. The vendor home Harvey said it would be, the live chat online said it will but directions have not accomplished. Any help would be appreciated

  After a few more hours (spred a few days!) I finally managed to get the wi - fi print job!

  Thank you again for your great advice - you really should write an Idiots Guide to the connection 8630's.

  Your time, expertise and willingness to share your knowledge are really appreciated

  My sincere greetings and thanks

  Colin

• HP Officejet Pro 8630: HP Officejet Pro 8630 Setup loading paper

  I have a new HP Officejet Pro 8630. Through the installation process, it is stuck at the loading paper. I loaded the paper in the upper and lower trays. I checked the trays and cartridges are seated well. Clicking next translates into a printer Calibration cycle - then returns to the loading paper. Help! Thank you.

  Hey @Zaldar,

  Welcome to the Forums of HP Support!

  I understand that your Officejet Pro 8630 e-all-in-one printer doesn't detect paper during initialization. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed this document explains How to solve problems of choice with your printer. If at this point, you are still unable to initialize the printer, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to discuss the options.

  Please let me know if you are able to reach a resolution. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Officejet Pro 8630: Envelopes single impression that all the black

  Use the same word for Mac 2011 file print envelopes once each month for years, but since I'm the new printer 8630 in August 2014, I get the occasional envelope all black (with a thin white border around) instead of the usual address.  I implemented with it to this day, but this month I do nothing will make me normal print - I tried to create a pdf file and checked all settings, so am at a loss to get a result.  Help? John

  Hi @jrandsk and welcome to the Forums of HP!

  I see that you are having problems printing envelope. I would like to help with that!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the e-all-in-one-HP Officejet Pro 8630 Printer series full feature software and drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!