HP officejet pro L7780 printer keeps printing the letter D per page

Similar Questions

• Officejet Pro L7780 print head error

  I have a Officejet Pro L7780 all-in-one. Recently, it does not work due to a print head error (printhead missing or damaged M/C). Help, please.  Thank you very much.

  Hello

  Use the following link to complete the troubleshooting steps.

  http://support.HP.com/us-en/document/c01446637

  If you still receive the error message after you perform the steps in troubleshooting mentioned in the document, then try cleaning print head in the printer menu.

  Installation Menu - Tools - cleaning print head

  Configure the Menu - Tools - align printer.

  If none of these help then try this reset... This reset will restore the printer to its factory settings & will clear all the settings of the printer.

  Unplug the cord from the back of the printer while the printer is always enabled.

  Now hold "# & 9 ' buttons on the printer and connect the power chords while pressing the 2 keys. Wait 10 seconds, then release the keys.

  If the printer turns off automatically, then wait for 10secs. and then turn on the printer using the power button on the printer.

  I hope this helps.

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• OfficeJet pro L7780: officejet pro L7780 replace it with the new model, which is comparable?

  I want to replace my old officejet pro L7780 with a new model, which is a comparable HP model today?

  Hello

  You can check the HP Officejet Pro 8620 as example, it is a product of the same level:

  http://store.HP.com/us/en/PDP/printers/HP-OfficeJet-Pro-8620-e-all-in-one-printer?JumpID=cp_r163_us/en/IPS/iito/shared/8620img

  You can check the HP site for the HP Officejet Pro series printers, more as wel as some HP Officejet printers.

  Kind regards

  Shlomi

• HP Officejet Pro 8600: print the page top

  When I print the forms on the internet - in this case a specific Web site - printing cost overruns the right margin of the page, so I see all of the form that is being printed.  Last year when I printed this form, it fits on the page very well.  Same computer, same printer

  This happens on a number of sites that I deal with, so I don't think that there is a problem with the site, I think it's a problem with the installation of the printer, but I have no idea what could be the cause of the problem.  Any help would be appreciated.

  Hey @Monajo,

  Thanks for getting back to me regarding this printing problem.

  Now that we have isolated the problem to a problem of Mozilla Firefox, we can work toward a resolution. To begin troubleshooting I have you check the page scaling settings within Firefox. Please follow the steps below.

  1. open a Web site that you want to print from Mozilla Firefox

  2. click on the Firefox Menu option and select print

  

  3. you will now see a print preview of what will Mozilla Firefox 'send' for your printer to print. Click Page layout on the top

  

  4. in the Page layout dialog box, you can select the 'reduced to fit page width"or"scale"option If this is not the case try first "Reduced to fit Page Width" option. If it is already selected, choose the scale option. You can play with the scale. For example, I adjusted my scale to 20%. When I hit OK, the print preview window shows the document to print as tiny. That's what your printer will print. If it is too small, you can click the Page Setup button again and adjust the scale until you find a scale that displays the preview before print correctly.

  

  5. press print once you make all necessary settings.

  Don't forget, your printer will print than it is "said" to print through the preview window before printing.

  Please let me know if the setting of the "Shrink to the width of the Page" or "Scale" options fix this problem for you. Good luck!

• HP Officejet Pro L7780 print, copy, Scan, Fax

  We used the HP L7780 as a standalone Copier (not connected to a computer or a network).

  Here we are ready to give the gift of unity, which still works well, but fear that its internal memory (or hard drive) can store images of copied data from sensitive information.

  How can we delete/overwrite this memory without destroying the operating system?

  We want the printer/copier to be functional for the new owner.

  Hi TechUserOKC,

  If you have not used the printer as a standalone Copier without connection to a computer or a network, then you don't have to worry about the images or the data stored in the device. However, if you sent a fax with this machine there is a chance of fax images could be stored and saved in the internal memory. In this case, you will need to restore the default settings of the printer.

  Let us know if that helps.

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• HP officejet pro 8600 prints the document around, but on any OTHER page

  Please see above the subject.

  Printer preferences changed.

  Five test pages print.

  It worked. No blank pages of morse.

  What now? Let set to the "BEST?"

• OfficeJet pro 8100 prints the code source visual studio in black only

  This problem occurs only for installing the 8100, previously, I received ouput on laserjet 2600n color.  I followed the troubleshooting pages, print in black only is disabled, grayscale printing is turned off.  Strangely, the same problem occurs when you print from MAC x-code.

  I think it is a setting in VS which must be enabled.  I found this forum which explains how do it, but I don't have access to VS to test.

• OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text & photos

  Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

  Help, please!

  Hi @LockGal,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

  To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

  Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

  Please confirm that the vertical or horizontal lines?

  NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

  • L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet pro 8600 printer-how to make this program work and installation?

  I have problems printing. I wonder how to ste it to the top and do work.

  Moved from feedback

  Original title; printer Officejet pro 8600

  Hi David,

  1. what operating system is installed?

  2. what security software is installed?

  You can go through the printer manual to know how to set up the printer and make it work.

  You can also refer to these items and check if that helps.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/How-do-I-install-printer-software-on-HP-OfficeJet-Pro-8600/TD-p/1123283

  http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AInstall&q=OfficeJet+Pro+8600+printer

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• OfficeJet Pro L7780: HP Solution Center

  I see I'm not the only one having this problem since the day of security Windows on Janualy 4, 2016. I executed issued alerts here to support.
  Basically what happens is that I can open the Solution Center, but when I try to open either Photo or Document scan I get a gray pop saying "The HP Imaging Device was not Found" it tells you so what do I do, but all of these steps have failed.

  I noticed something is in the Device Manager, devices for imaging and printers, Officejet Pro L7700 under events, I also have this message.
  Devies Imaging ' device USB\VID_03F0 & PID_2312 & MI_00\6 & 36fd2d51 & one & 0000 also requires installation. »
  Printers 'device USBPRINT\HPOfficejet_Pro_L7700\7 & 30237294 & 1 & USB001 requires installation."

  I'm a complete novice, but for me the finger seems to be pointing to my USB drivers or control. Anyone have any ideas?

  Perhaps I should mention the printer works fine

  Thank you.

  Hi @Knocklong44,

  Welcome to the HP Forums!

  I noticed that you are unable to access certain features of your HP, with your HP Officejet pro L7780 printer solution Center. I'm happy to help with this problem!

  Please, try the following steps:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Expect that the software will ask you to connect the printer USB cable.)

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope these steps help!

• SNMP eat upward of bandwidth on my (HP officejet pro L7780) ethernet

  Hi all, I am running Win 7 (64-bit) on my server, ethernet to a router from linksys gateway 3000. Attached to the same router the Ethernet is a HP OfficeJet Pro L7780 printer. I have a printer HP Deskjet 6988 ethernet attached to a hub (with a link to my linksys gigabit). There are many other devices Wi-wired and connected to this network. The problem I see is the following: I use a client of Wireshark network sniffer on my server. When you run a trace on the ethernet on the Linksys router, I see a large number of SNMP get requests and get responses. These are still ongoing between my server and the HP Officejet 7780 (never in/from) the HP Deskjet 6988.  This segment of my network is flooded with such things SNMP. You wish to know which packages are and how can I cut most of this. Surely, there must be something in the printer software HP on my server that can be tweaked to eliminate most (if not all) of this SNMP traffic...   Everyone?

  You may also lose the ability to check your computer ink levels and some other utilities.  You may re-enable the services when you need to scan.  Stops the service and see what happens!  You can always enable it back.

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.