HP p1102w: could not connect to the WiFi hp p1102w

Similar Questions

• HP PavilionNotebook-15-p101nm: "windows could not connect to the"wifi"

  new tour.  installed win7/64, gatherd all the missing drivers (Device Manager was all yellow) ultimately it does not connect to the internet. What to do... ? He sees the wifi, knows his name, etc., but does not connect to it. neither cable nor wifi...

  thnks in advance

  configuration of the router... solved the problem... connected via the MAC address... ...

• HP laptop could not connect to the WiFi network

  My HP Pavillion G6 connects to the Wifi/Home network. It worked fine until recently. It can see the network but will not connect. My product number is C9M83PA #ABG. There running Windows 8.1. Very frustrating. Help, please

  Problem has been fixed. It seems that HP and Windows 8.1 did not get along! After you connect the laptop to the internet via an ethernet cable, I was able to use the HP Wizard to download the updates. I then rebooted both the laptop AND the router and everything works.

• BlackBerry smartphones could not connect to the WiFi system at home - "unable to get an IP address.

  Like many of you, I have WiFi connection problems with my new BB9700.

  When I'm out of the House, I can see my BB, find local WiFI hotspots and I can connect to them immediately.

  However, when I get home, my BB doesn't connect to my WiFi, return the following error message:

  Unable to connect

  Reason: Could not obtain an IP address

  I downloaded the latest version of the software BB (now running version 5.0.0.351), cold all started in view (router, telephone, coffee table and the cat) but still the same error. My foot pain, the cat is not about me and I still can't connect to the House! Of course, my carrier connection works perfectly like their outrageous fees structure... (They are 3G or Hutchinson Telecom under a different name).

  My WiFi access provider (PCCW / HK Netvigator) checked my system configuration and report that everything works correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the guy from the hotline can see when I connect each of them to the system.

  I tried different combinations of switching the usual options on and off on the BB but always get a connection.

  SO, any of you kind of people you have a solution other than the cat suddenly once again?

  Thanks in advance,

  RS. HK.

  Dear Mike,

  I basically solved this issue will me a LOT of searching.

  Step 1.

  Router

  MAC address of my Blackberry 9700 has added to the list of MAC access on my router configuration. (Subject to the router to save settings)

  Step 2.

  Router

  Reset the Security Type on router configuration None (presented to the router to save settings)

  Step 3.

  BlackBerry Bold 9700

  Delete the profile of my WiFi at home in the WiFi Options

  Step 4.

  BlackBerry Bold 9700

  Reentry into the profile of my WiFi at home in WiFi Configuration

  WiFi in the House. SUCCESS AT LAST!

  Step 5.

  BlackBerry Bold 9700

  In manage connections, unchecked Mobile Network (i.e. Off and No Way can connect to my 3G service provider)

  Step 6.

  Turn off the Blackberry Bold 9700.

  Battery pull.

  Restart the Blackberry Bold 9700.

  The House immediately found of WiFi Internet and all other functions working perfectly.

  Only problem is now my home network is unsecured. (Can't get the IP address if WEP security is enabled)

  So it's all good now and forward it to someone else who has the same problem.

  Happy Chinese new year!

  Rick

  Hong Kong

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• "Could not connect to the server Game Center"

  OK, so here's the deal:

  Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?

  iPhone 3GS, iOS 6.1.6

  Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!

  Nevermind, it seems to have fixed itself.

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• ePrint Setup could not connect to the network

  I have problem with my hp3515 all-in-one printer (two months). I am facing problem with ePrint. It has been installed correctly, but recently it has stopped working. HP wireless works and shows the IP address. When you press the ePrint button it gives the message that it could not connect to the internet. I tried to reconfigure ePrint and now it is not possible to reconfigure. I use a router D Link DSL-2750U.

  Hello

  First, I put a static DNS on the built-in web server (EWS). To do this:

  1. Type (example 192.168.XXX.XXX) IP address by itself in the address bar of the browser. Who will bring to the top of the EWS page. From there, you want to find the network tab. On this page, find the column that is usually found on the left and select 'network' and then on the network address to find net page (IP), then select this option. Who will bring to the top of the configuration page.
  2. You want to draw attention to section 2 entitled "DNS Configuration". Change the radial button to "Manual DNS"; for filling of favorite/primary DNS 8.8.8.8; for the secondary/Alternative fill 8.8.4.4 and then select 'apply '.
  3. If a message appears after it with an "OK" button carefully read this message! Most of the time this message is to inform you to click OK to cancel the change you made, if that's the message of case ignore, you can simply navigate to another tab on the built-in Web server to get away.
  4. Power cycle then the printer and it should then connect to web services

  As is printing wireless to other computers and static DNS should solve your problems of ePrint you would not need to uninstall at this stage.

  To reprint the touch of info page the button marked 'ePrint' on the front panel of the printer and that should bring up an option on the display screen to re - print information page.

• I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

  I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

  What is your operating system and Service Pack?

  What is your anti-malware?

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx