HP p6310f

Similar Questions

• HP p6310f pavillian: desktop memory

  My daughter lives in another State and has visited a week before and dropped off an HP computer, p6310f.  I plugged in and turned it and it has 2 problems.  I will only address one at a time. The computer would not start.  I used my computer to search online to HP for the p6310f features.  I took a mental note on the specs.  I lit the p6310f and press F - 10 to look over the bios settings.  The profile for HP for the p6310f indicates the memory module DDR3 M2N78 - motherboard "is supported.  The BIOS tells me there are (3) memory modules DDR2 installed.  I checked the MB model number and that's okay.  I read the info on the memory modules and they are DDR2.  Is the spec HP p6310f bad sheet when declaring the M2N78 - THE motherboard only supports DDR3 memory strips, or are the memory modules DDR2 badly installed?  I don't know the history of this computer and my daughter she recently obtained a military person being transferred abroad.  I would appreciate any information anyone can provide on this issue. Thank you

  Hello:

  It seems that the info attached to the support page for this model may be incorrect.

  Here is another page, the same motherboard having demonstrated that it has DDR2 memory.

  http://support.HP.com/us-en/document/c01635734

  If you have confirmed that the stickers on the memory of State it's DDR2 and so not the BIOS, then it's DDR2.

  It is physically impossible install memory DDR2 DDR3 slots and vice versa.

  The notch in the memory is divided into different locations on DDR, DDR2, and DDR3 memory.

  DDR types operate with voltages different and incompatible with other DDR type.

  That's why the notches in the memory are cut in different places.  To avoid shorting the motherboard or memory modules by installing the memory of the wrong type.

• power supply for p6310f

  to model a CX750 Corsair Builder Series ATX 80 PLUS Bronze Certified Power Supply work with my hp p6310f computer I think it's a mid ATX case

  EDTII

  The CX750 is 5.9 "x 3.4" x 6.3 ", while the CX500/CX600 are 5.9" x 3.4 "x 5.5". " In addition, the C750 has extra long cables. This means that the CX750 will adapt but can hinder or interfere with the reader of CD/DVD-ROM of the computer and other items. In addition, with the cables more and longer... There will be less space in the case of air flow and heat dissipates.

  Please send Bravo

• Hewlett packard p6310f desktop cpu radiator fan

  I'm looking for a replacement cpu heatsink for my p6310f.   I can't find a replacement product that will fit in my case.   If someone could suggest an alternative product or where I could get one of HP.

  Thank you

  Vince

  The radiator of the processor fan part number is 5188-3722.

  Here are the links where you can try buy

  http://www.eBay.com/ITM/genuine-3-pin-HP-92MM-system-cooling-case-fan-5188-3722-/170618234739

  http://www.Sears.com/Search=5188-3722?part=&StoreID=10153&URL=

  Here is the link which is the procedure to remove and replace the fan:

  http://h10032.www1.HP.com/CTG/manual/c01859455.PDF

• ERROR: No supported CPU installed, HP P6310F

  HP p6310F

  Windows 7 Home Edition

  ERROR: No supported CPU installed

  CPU replacement

  Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9xxe/8xx (Deneb).  My understanding has always been that "9xx" means any phenom II in the class of the 900 series.

  I bought a retail Phenom II X 4 965 Black Edition, part HDZ965FBGMBOX number, installed and get the error message: CPU support is not installed message.  After searching and reading about the error message and other messages, it seems it might be due to the 'black edition' and/or because it is 125 watts.  It was the answer to a few others in the same situation as me.

  Can you please tell me why this CPU is not compatible and please help me with a list of compatible CPU?

  This is also in the 9xx series, but is it at 125W

  HDZ955FBK4DGM AMD Phenom II X processor 4 955 - Quad Core, 6 MB of Cache L3, 2 MB L2 Cache, 3.20 GHz, Socket AM3, 125W, fanless, OEM

  This lies in the 9xx series and is 95W

  AMD HDX945WFGIBOX Phenom II X 4 945 Quad Core Processor - 3.00 GHz, 6 MB of Cache, bus front to 2000 MHz (4000 MT/s), retail, Socket AM3, processor with fan

  The stock processor is an AMD Athlon II X 4 630, 95W

  I can provide any other information you may need, thank you very much!

  There is no AMD Black Edition CPU that are compatible with any PC HP desktop.

  That's what the problem is related to. Black Edition CPU are special processors who have discovered the multipliers for amateur quality motherboards. You could not access the multipliers to overclock the CPU with the motherboard you have installed it anyway.

  Even if you choose, buy and install one of the microprocessors in maintenance & service Guide there is no guarantee HP which will be exploited.

  You should also be aware that installing a different CPU than your office has been delivered with the warranty.

  Sorry to bear bad news.

  The good news is that the processors listed in the maintenance department & guide reputable reports of upgrade in discussions in the forum, to run.

  Best regards
  ERICO

• Hewlett packard p6310f Desktop 2 TB hard drive

  I would like to know if a hard disk of 2 to can be installed in a Hewlett packard p6310f desktop.  I Googled, but there is not much information out there for this model of computer.

  Thank you

  Vince

  the p6310f supports a 2 TB drive.  I just installed a 2 TB seagate drive in my p6310f.

• Audio jumps randomly on my HP Pavilion p6310f

  HP Pavilion p6310f product # AY018AA #ABA

  Operating system is windows 7 Home premium

  The sound skips and cracks at intervals of 5 seconds at random, I went and time without it and thought it was better and all of a sudden he pops up. I have read many things on the GAL, the audio.exe file try drivers etc. Realtek is accompanying the computer so I even bought an another card (creative) sound in the hope it but no good.

  As far as I know the audio drivers are up-to-date

  Looking at a spell of latency dpc I see it stings at a time where the audio skips, but that did not help me learn anything except there's a mismatch somehow.

  I noticed that the lag occurs more frequently when I use the browsers IE or firefox and browse to a new page, but it ignores even less frequently even when I'm not internet.

  This may help someone, but after months trying to figure out what was causing the noise to jump I started searching for DPC latency and the use of monitors and finally highlighted that whenever the sound popped, I had a lag spike. I went further and got a latency monitor which has been more accurate in indicating what processes or the pilots were using. There was a little, but what I did is notice that I kept having an activity that was of fortification, then I tried to disable mcafee a firewall I used, but still it happened then what I did uninstall Mcafee completely and reinstalled and uses just the windows firewall and the sound problem is gone!

• p6310f video card update

  You want to upgrade my GPU and maybe p6310f PSU to play Warcraft MoP.

  Watch->

   01 G-P3-2621-KR from EVGA GeForce GT 620 1 GB memory DDR3 64 - bit PCI Express 2.0 x 16 HDCP Ready video card maybe the GT 630?

   

  Mayber the Corsair PSU CX600W?

   

  Thank you, Sly.

  Alpela, welcome to the forum.

  I have reviewed the requirements for WoW, MoP, and it seems that the video card and PSU should do what you want.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  I think it should fit without any problem, however.

  If your problem is solved, please click "accept as a Solution.

• Upgrade to a HP P6310f

  I want to upgrade my p6310f hp with a new PSU, gpu and cpu cooler for overclocking (the CPU is an AMD Athlon II x 4 630 and I heard tha is a good Overclocker). Here are the pieces...

  1 600 watts of PSU-Corsair Builder series

  2 GPU - Sapphire Radeon 7850

  3 CPU cooler - Cooler Master Hyper 212 EVO

  I was wondering if the video card and the CPU cooler both held on the same motherboard since it is a matx.  I was also worried that the gpu and the cpu cooler does not in this case.  In addition, I was worried about overheating in the case and if he trained my system crash.  If necessary, I am ready to buy a new case that would be the HAF 912.   Thanks for your help.

  Here are the specifications of your HP Pavilion p6310f desktop. You are right that the CPU is an AMD Athlon II x 4 630 and you may have heard it's a good overclock but the BIOS on these systems are locked and have absolutely no options to tweak the parameters of your system, including overclocking it.

  1. Corsair CX600 is a highly recommended PSU and is known to fit in many cases of HP.

  2 to 8.27 inches long, GPU Sapphire Radeon 7850 should fit without a problem. It will take two slots.

  3 cooler Master Hyper 212 EVO CPU cooler... jump, a waste of money that the system is not overclockable.

• p6310f reading of RAM PC3-8500 but has installed PC3-10600. What gives?

  Here, I'm confused.  I bought your desktop p6310f with 6 GB of RAM.  I couldn't resist the temptation to fill the fourth slot with another stick of RAM, so I ordered a 2 GB of RAM PC3-10600 from Newegg key since it is what the three sticks that are installed in the machine - I removed the cover and looked. After installing stick I checked to see if it was ok by CPU - Z and SIW, and saw that the system has acknowledged the new stick (Patriot) PC3-8500.

  I called the Patriot - and actually spoke to a person, who said that the system could be down the RAM because of a stick "odd" as opposed to a pair that would be preferable, though even there is no support dual channel on this system.  He also said he could be a limitation of the motherboard, and he said that HP have been difficult to resolve.  He told me to remove the three original sticks of RAM and install just the food a stick to see if she would recognize him as PC3-10600.  I did what he said, and the computer recognizes the stick as PC3-8500.  I tried to call food back but could not get through.

  I removed the stick of Patriot and reinstalled three sticks of oem.  When I went into the BIOS it says that I have now three sticks of memory PC3-8500.  WHA -?  PC3-8500 all along was, and I didn't know?  She changed something by installing the stick of Patriot who will not change by itself unless I have reset the CMOS?

  I went to a local Best Buy today where they had their version of this machine (p6310y) on the screen, but I could not get into the BIOS.  Guess they don't want not customers bricking the system...

  A favor please, someone with a p6310f and who had not touched the RAM again: start the machine and go into the BIOS.  The first screen will tell what he has memory, the real rating-PC3-8500 MB or PC3-10600.  I suppose it's possible such HP got a good deal on these sticks of RAM, they put 'em in machines where their potential is not used.

  TIA

  Larry

  Bristol, TN

  Larry, this is the Product Specifications page for the computer.  If you look in the section titled "Memory", it shows "sustained speed PC3 10600 MB/s (message as PC3 8500).  It's a little confusing.  However, it seems that you are correct.  The motherboard can only use memory as PC3 8500.

  
  

• New RAM in p6310f causes BSOD. Aries is Corsair CMX8GBX3M2A1333c9.

  Product:. Computer Office Pavilion P6310f

  OS: Windows 7 Home Premium

  Error: BSOD

  Changes: Installed RAM 8 GB kit

  After analysis by Piriform Speccy, my RAM settings currently 7-7-7-20. The new RAM is 9-9-9-24. But the BIOS would not let me access the RAM settings, they were all grayed... and it was never started long enough for me to run Speccy and see if the parameters have been updated automatically.

  Is there something I need to do rather than just remove the old RAM and put in the new? If so, how can I get my BIOS to let me adjust these settings? Or do I (probably) have a bad stick of RAM?

  Thank you!

  Hi, John:

  Normally in BIOS is a menu diagnostics where you can test the memory and/or hard drive.

  If your PC has this tool, then run the memory diagnostics.

  Paul

• I have a hp pavilion p6310f and there a Bay expanson before is - for his part what little

  It is about 3-4 inches long and 1 inch high, that is it for?

  EDTII

  Hello

  The HP Pocket Media drive is an external USB hard drive. The multimedia Pocket Player slips into the slot as pictured above. You can use it as storage for backups and auxiliary data.

• I have a p6310f and I have my cpu fan connected directly in my msu and fan controller how do I

  can say that the cpu fan has no error and fan service doesn't have a system soon error

  EDTII

  The fans (CPU and case) are attached to the motherboard for this (the sensors) headers. Connect directly to the power supply (not a ' SSM') bypassed motherboard sensor circuit.

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• p6310f: motherboard 573400-001

  I am looking for a part number compatible for my motherboard. Part number 573400-001 (M2N78 - LA) I looked throughout the Internet, including ebay and have found a lot of used or breath of motherboards. But people still want a lot of money for them. I'm looking for a Board that is less than $200 that will work in my office without having to buy a hard drive and buy the windows operating system. Any help would be appreciated.

  Kinda what I thought, thank you for the answer.