HP P6325SC HP startscreen freezes if the HDD is attached

I have problem with HP P6325SC, it hangs at the HP boot screen (v5.13) if I boot with HARD drive attached to it.

If I boot Ubuntu USB only, no drive attached HARD, the machine starts normally.

SATA drives (with jumpers) are old, but they are working with another PC.

HARD drive (orange) flashes once or twice any time when I press the power, death after that.

I can't enter BIOS if the HARD drive is on.

I tried these:

-Ubuntu normally starts from USB - when the HARD drive is not in the PC

-A battery CMOS out for awhile

Control cable-Sata, works with other PCs

Port control - Sata (4 of them) not sure do they work?

-Checking the hard drive, works with the other PC (I'm not sure about rider put...)

-Video card works

Turns - HARD drive

-Tried with another power supply

-tried changing the ACHI & IDE from BIOS settings

Is there something wrong with the motherboard?

Product #.

WE264AA-UUW

HP Diagnostics gives the error code: BIOHD-2.

I'm trying mcguyver66 solution to this. There is nothing wrong with the HARD drive, tried different ones on three (of work):

28/01/2012-04:32

I had the same problem with my HP Pavalion m9580nl.

BIOS is not 'see' any kind of device, no HARD and no cd/dvd-rom drive.

I followed the manual how to deal with this problem, but it gives me the solution.

The diagnostic test mentioned my WDC - HDD with code BIOHD-2 error, but in the bios reset it (F5) values standart was no solution at all. I did everything the guys at HP suggested here on this forum, but it was not the solution to everything.

And I was supprised with all the animals advise I read said to those who have made it clear what was their problem and advised to buy a nice recovery ofe kit. And that did not work. There is, of course, not!

The problem is in the bios itself. So I solved the problem with these steps.

1 disconnect your computer all the power cords.

2. open the lid and remove the main motherboard power cable.

3. remove the power cables and data from your HARD drive (case dousn can't cd/dvd-ROM)

4. remove the graphics card (communal reach the bios battery)

5. remove the bios battery.

6. do not touch your pc for at least 12 hours! To be sure, the bios is reset to zero.

7. reconnect everything you have disconnected as described above.

8. start and it works again

Tags: HP Desktops

Similar Questions

  • Satellite L300-1AQ freeze on the Welcome window

    Hello

    Can anyone help please. I have a satellite L300-1AQ

    the problem I have is:

    It was working OK. One day the next it would freeze on the Welcome window.
    The only way I could get it to start was F8 safe mode.
    And then it would freeze once a few minutes done repair my computer and Toshiba HDD recovery now it starts without going into safe mode but it still freezer a few minutes.

    I also tried swapping the ram from this laptop. with that out of a friends, I always freeze

    Thank you
    MB

    OS vista Home premium 6.0.6001 service Pack1
    Processor inter (R) Core 2 duo CPU T5800 @ 2.00ghz
    2048 MB RAM

    > the only way I could get it at startup has been F 8 then mode.then course it would freeze after a few minutes did fix my computer and Toshiba HDD recovery

    As I see it, * Toshiba Hdd recovery * does not solve your problem. You checked with the other memory, but it always freeze. so, I guess that a hard drive can be a troublemaker. If your laptop is still under warranty, you should contact them (SAV)

  • Dv4-2167 freezes on the HP logo screen

    My laptop HP DV4-2167sb hangs at the HP logo screen.  I tried all the solutions listed on the site of HP (power reset, battery, cmos, memory, others work hard, Flash BIOS, etc.)  I tried the official DVD of the HP system recovery (Windows 7 Recovery for Windows 7 media products), but the system crashes and does not start the DVD.

    Here's the strange part.  If I remove the hard drive I can get into the BIOS.

    The laptop only starts linux on a usb key when the hard disk is deleted.  Everything works perfectly, while running Linux (monitor, memory, DVD player, etc.).

    The laptop only starts from linux CD if there is a bootable USB device attached (i.e. the USB stick with linux, ipod, etc.)  Here are the scenarios and messages when errors occur.

    HP Pavilion DV4-2167sb

    Product number: WA688UA #ABA

    ID of the system board: 140A

    Processor type: Intel® Core™ i3 CPU M330 2.13 GHz

    4086MB total memory

    Version of the BIOS F.0F

    Editor BIOS: Insyde

    1) internal hard drive installed in the computer

    (2) drive hard internal installed in the computer and bootable CD in the CD drive
    (boot order is the CD player, USB, hard drive)

    3) internal hard drive installed in the computer and the USB bootable stick with Linux Mint on a USB port (boot order is the CD player, USB, hard drive)

    It freezes on the HP logo with a message at the bottom of the screen

    Press ESC for the Start Menu.

    A button does not work because the computer is locked (frozen).  It will beep when a key is pressed repeatedly.

    (4) internal HDD deleted from the computer and Boot CD in the CD drive

    Not found boot device
    Please install an operating system on your hard drive
    Hard drive (3F0)
    F2 System Diagonstics
    For more information, please visit: www.hp.com/go/techcenter/startup

    (5) internal HDD deleted from the computer and the USB Bootable with Linux Mint key on USB port

    Correctly at startup the system and everything works great.

    (6) internal HDD deleted from the computer and Boot CD USB Stick and CD with Linux Mint on USB port

    Boot CD loads and works correctly

    Someone has an idea of what could be the problem.  I think it may be the hard disk controller, but I do not know how to test for a bad controller.

    -James

    I finally understood the problem of the drive not being not well.  Bezel plastic of the SATA connector in the bottom Bay low.

    The SATA connector in the hard drive Bay did not have contact with the pins on the hard drive.  It seems that the bottom bezel plastic of the SATA connector in the Bay was small and sagging.  That's why he provided enough support for the disk hard so that the connector pins make contact.

    I cut a small piece of rigid plastic and inserted into the lower part of the plastic bezel.  It has provided support and the pins on the hard disk to make contact with the SATA connector pins.

    My hard drive is now recogonized and works perfectly.

    -James

  • I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

    I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

    Hello Kluggerjo,

    Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

    I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

    If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

    If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

    If you experience any problems or have any questions, please let us know. The entire community is here to help.
    -Best regards

  • Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

    I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

    Delete the app first, only then it re-download again.

    If not, try these standard troubleshooting steps.

    Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

    If this does not help, you may need to restore your iPhone.

    https://support.Apple.com/en-us/HT204184

    If your backup in iTunes, make sure that it is an encrypted backup.

  • When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have spend on them... Same video works fine on Chrome?

    When you watch a video on Facebook, etc., the video part freezes and the sound continues to play until I have to go over it. I use Wuindows 7. The video will restart when I pass this pointer/mouse.
    The same video (s) works correctly when you use Chrome?

    This issue may be caused by malicious software.

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

    Hello

    Check if the hard disk needs repair.

    Open the disk utility, located app in HD > Applications > utilities

    Select Macintosh HD on the left then click the first aid tab, and then click Run.

  • My new macbook freezes all the time, I hard shut - downs, just Mac Tech run diagnostics and say that everything is fine. I think I bought a lemon.

    My new Macbook Air freezes all the time, I do closures hard then it comes back, in general. The tech simply ran Mac twice diagnostics and says that nothing is wrong with it. I think I bought a lemon. Any ideas what I need to do? Is it's better to go to a real Apple store rather than just Mac for repairs/diagnosis? Is the customer service nothing better in a real store?

    The guarantee gives the right to the free phone support for the first 90 days of ownership.

    If you bought the product in the United States directly from Apple (not a retailer), you have 14 days from the date of delivery where to Exchange or return it for a refund. In other countries, the return policy may be different. If you purchased from a reseller, its return policy applies.

  • Portege A600-12 t - freeze all the time 10 times per day

    My laptop freeze all the time, maybe 10 times a day - someone has a solution to this?

    Even watching a movie or surfing the net is very difficult.

    I need the computer for my work.

    Dear stein, don't get me wrong, but I really do not understand what kind of help or solution you wait now. Who knows why this is happening there? Configuration of the laptop is not known to us and implement everything can be responsible for this.

    In my opinion you need a simple solution to this description of the problem sentence reinstall OS using Toshiba recovery image. Maybe you do not have these problems with the own operating system preinstalled.

    Good luck.

  • Satellite T110 - how to change the HDD to protect?

    I just got a Satellite T110-107 on Windows 7.

    My drive hard protect seems to have turned itself off and I cannot turn it on again, all the buttons are "grayed out".

    Hello

    Do you mean the HDD Protection Utility? If so, I would recommend reinstall this tool. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Also check that the latest version of the BIOS is installed.

    Good luck! :)

  • Satellite U940-100 - replace the HDD SSD

    Hello

    I want to change my Sat U940-100 by a SSD HARD drive.
    I can make a perfect copy but when I change the HDD SSD won't.
    Can someone explain me what I have to do?

    I think it has to do with het SSD of 32 GB, which is already inside?
    What I have to change something in the BIOS?

    Thanks in advance

    Dag

    What do you mean it won't? What did you do exactly?

    In my opinion after Exchange of HDD with SSD, you must install the original recovery image and start using your laptop with the 'settings '.

  • My iMac keeps freezing since the upgrade to El Capitan!

    Hello

    Can anyone help.

    I upgraded a few months ago in El Capitan and since then sometimes had problems with my desktop freezing, an irritation but not too much trouble.

    However, in the last two weeks, he becomes a nightmare!

    Most of the time its does not happen when I put the cpmupter "sleep" and then when I try and wake him up, she is just completely frozen, & I cannot do anything and end up having to put the broad & market with the switch at the back of the computer. Sometimes, it just freezes in the middle to help and is not even specific to the use of any particular program.

    Can anyone help or make suggestions, what could be the problem or how I can try and identify the problem. I'm not technical, so really don't know where to start.

    Currently running OS X El Capitan 10.11.4 Version

    iMac (21.5 inch, late 2009)

    3.06 GHz Intel Core 2 Duo processor

    Memory 4GB 1067 MHz DDR3

    ATI Radeon HD 4670 256MB graphics card

    Thank you very much.

    G

    Andrew F.

    Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

    If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

  • Increases the size of the "HDD Recovery" folder on the partition "D".

    I am the owner of laptop Toshiba Satellite, recently, I noticed that my D: drive (unused) is saturated and after careful analysis I realized that the "HDDRecovery" file size is > 200 GB.

    I don't want to remove the file or remove image files inside that I need the functionality of recovery, but I have not a clue how to handle the recovery process to decrease the volume.

    Do you have an idea how this issue?

    Wojtek

    Hello

    It seems strange to me that the size of the HDD recovery folder would increase up to 200 GB continuously. Probably for laptop computer stores files backup automatically in this folder, but I m not very well why

    However, I recommend you to create a recovery media (recovery disk) using the Toshiba
    Recovery media creator (this software pre-installed on the Toshiba laptop).

    The use of disk recovery (or USB key recovery) would fix the laptop back to the factory and even if settings you should remove the folder in HARD drive recovery or the entire partition, this partition, and these files would be created again.

    Hope that this information could be useful for you.

  • Portege R500 - PPR50E replacement of the HDD or SSD

    Hello

    The hard drive in my beloved Portege R500 is dead.

    The model is a Toshiba MK1237GSX and am looking for a compatible hard drive to replace it with conclusion that this exact model turns out to be difficult. You can also and my first choice would be to replace the HDD with a ssd drive - is this possible and any recommendation on model?

    Any help is very appreciated

    Thanks in advance

    Agree with Akuma.
    You need an SSD that supports the SATA interface.
    You need disc SSD SATA 2.5

  • Computer laptop need to change the HDD in the SDS?

    Have 3 questions related to the Toshiba SSD!
    1. what laptop need to change the HDD in the SDS?
    ATA, http://www.toshiba.com/taec/adinfo/ssdfacts/ so 1.8 and 2.5, I look at who is the same dimenssions and right?

    2. I have this model Toshiba R200-S2031, is it possible to change drive HARD 80-SSD 256 1.8 inches? I understand that my model has 1.8 IDE I can't take 2.5? But replace IDE ATA is possible that they are the same size?

    3. If I R500 with 64 SSD drive, can I replace it it with greater SDS and the same size of thumb? Let's say I have 2.5 64 GB SSD ich so I could replace it with 500 GB SSD?

    tnaks for answers.
    and Toshiba - thanks to make small laptops, really enjoy.
    you want to update faster, but I LIKE THEM!
    Thanks Toshiba!

    Husbands

    (1) as a general rule, all laptops can be upgraded to an SSD. If the connector on the SSD is the same as the original hard drive connector, it should work.

    (2) I believe there are 1.8 "PATA SSD available, google is your friend.

    (3) I think the R500 is using a connector ZIFF customized for the SSD drive, then you will not be able to install a standard SATA or PATA 2.5 "SSD Drive. I don't know if you can buy SSDS with the connector ZIFF, once again, google can help you.

Maybe you are looking for

  • Change language querty

    Hello I added a virtual keyboard that supports a QWERTY Hebrew work and it is great, but the physical works in English - y at - it a solution for this?

  • Updates Windows 7 stuck during shutdown.

    Hello My 64 bit Windows 7 updates are stuck during shutdown and only for computer laptop stop is to make hard stop, but it works very well when I start again and when I stop or even restart again get it stuck so now I Hibernate my laptop. Updates, I

  • Initialization code of FPGA

    I am writing a FPGA code that will just perform an initialization operation (bring the analog output values to ZERO). After pressing the SET/RESET button, the analogue output should always give aZERO even if the button is released. I'm using LabVIEW

  • Mouse problem

    When I use my mouse that everything works well and perfect. However when I try to play a game on my computer, and this happens on more than one game does not match the mouse were the cursor is located. To explain lets say, it's a list to go 1,2,3,4.

  • HP C3180 printer

    Recently updated from Vista to 7 system. My C3180 printer not scan