HP Pavilion 13-S102TU: no support hosted network

Similar Questions

• Pavilion 15 ab214TX: access point does not (hosted network supported: No.) (Realtek RTl8723BE)

  I am not able to hotspot with the software or cmd. I have only checked in the Device Manager, there are no drivers "Hosted Microsoft Virtual network adapter" available. I have the latest driver for my wifi (Realtek RTl8723BE) card. Also in the cmd... supported hosted network said NO! can someone please me the latest drivers

  

  installed this version of the driver... I think it is assigned by microsoft... everything works fine now

  

• No Edge 15 Broadcom 802.11ac none hosted network management and stability problems

  I have a new edge 15 that came with Windows 10 64-bit pre-installed. I want to be able to run the soft AP WiFi so I can connect to my wifi adapter.

  The WiFi card is a Broadcom 802.11ac and according to other computers using Dell with the same chip, but the Dell Windows 7 driver supports hosted network supports. But on my computer with the latest driver 7.35.267.0 dated 05/14/15, supported network hosted shows no., which means that the pilot and the chip does not support.

  It seems that it's a driver problem and hardware supports hosted networks.

  Also, sometimes when I turn on my computer, the WiFi does not detect the AP. It's the continuous offshore. I can get the connectivity by deactivation and reactivation of the interface. A pain. Not a big pain, but pain. Looks like the driver reload or turn on the radio after that sleep does not work properly.

  Can Lenovo if you please provide a stable driver for the Broadcom chip work.

  Thank you.

  I ended up completely reinstall windows 10 and uses the stock drivers.

  No bloat ware lenovo. Works fine now.

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• T450s: Hosted network feature not supported?

  I have a ThinkPad T450s bought in Dec 2015 with Windows 10 Pro. It has the Intel AC 7265 wireless card. I am trying to use the hosted network feature Windows to use the laptop as a hotspot for other devices, but I can't make it work.

  When I open an administrator command prompt and run "netsh wlan show drivers", the parameter ' hosted network supported:' has the value 'no '.

  I tried updating the wireless network card driver via the tool companion of Lenovo, via the Intel driver update utility and Windows via the Device Manager. The wireless driver has been updated to version 18.330.1 dated dated 05-01-2016. Then, I rebooted the machine but still no improvement. The characteristic hosted network shows as not supported. I also tried showing the devices hidden in Device Manager but under network adapters, there is no virtual card listed Microsoft hosted network.

  Is this a driver problem? Anyone with a broadcast network animated T450s as being taken in charge?

  Thank you

  Well, I found a solution on the Intel community forum: https://communities.intel.com/message/327193. A couple of users in this thread (the one with a Lenovo X 1 carbon) suggested to use an older version of 18.11 18.12 driver. So that's what I did and it worked! Here are my actual steps:

• Example: Pavilion ac123tx: hosted network does not start

  in my computer hp laptop ac123tx (preloaded with win 10 OS) not able to start the wifi hotspot because it lacks the virtual network adapter hosted Microsoft. I tried to start the hosted network from cmd prompt, but every time it gives message hosted network could not be started. The group or resource is not in the correct state to perform the requested operation. what need have the solution to this?

  Hello @gbnavapara,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!

  Have you tried activation of the adapter in the Device Manager?  You can use the resources here to help: difficulty The Hosted network could not be started in Windows 10 error

  (Not a HP website supported).

  Also, you can try to update your network drivers.  If you're still having problems, then try to review the measures offered in the following post:

  Re: Microsoft organized virtual adapter network - this device is not connected to the computer

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• "The hosted network could not be started."

  I recently bought a Samsung Galaxy S2 and when trying to connect to my Wifi network, I found that the signal from the router was not strong enough to reach the floor, and since I have a laptop connected with a cable that I thought I could make it work like a virtual router. After some research, I found several programs:

  I tried Connectify, which did not work. Then I tried Virtual Router, that does not work either. Then, I found this:

  http://www.techylabs.com/setting-up-a-virtual-router-in-Windows-7.html

  And it worked, the network appeared in the list on my phone. Unfortunately, when you try to connect, it got stuck on ' Optaining IP-address '.

  I tried to use a static IP address, and even with one put in place, it got stuck on ' Optaining IP-address '.

  After that, I have been clicking through the menus a lot and hit accidentally turn off somewhere. Since then, when I try to start the virtual router, it says:

  The hosted network could not be started.

  The group or resource is not in the correct state to perform the requested operation.

  I can't find the place where I hit the turn off, and I don't know what to do more :(

  Hello

  I suggest you to see link below and check if it helps.

  WiFi/SoftAP virtual fails to start with "the hosted network could not start" on Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/2625519

  Hope this information is useful.

• Hosted network problem in Windows 8 Pro

  my wireless network adapter supports the hostednetowork when I type in cmd netsh wlan start hostednetowrk the following text is displayed. the hosted network could not be started. the group or resource is not in the correct state to perform the requested operation. I have run windows 8 pro. Help, please.

  Name of the interface: Wi - Fi

  Pilot: TP-LINK Wireless N adapter

  Seller: TP-LINK

  Supplier: TP-LINK

  Date: 11/26/2009

  Version: 3.5.0.12

  INF file: C:\Windows\INF\oem26.inf

  Files: total 1

  C:\Windows\system32\DRIVERS\arusb_win7x.sys

  Type: Wi - Fi Native Driver

  Radio types supported: 802.11 g

  FIPS 140-2 mode supported: Yes

  802.11W protection of management framework supported: No.

  Hosted network supported: Yes

  Authentication and cipher supported in infrastructure mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  WPA-Enterprise TKIP

  WPA-Personal TKIP

  WPA2-Enterprise TKIP

  TKIP-WPA2-Personal

  CCMP WPA-Enterprise

  CCMP WPA-Personal

  WPA2-Enterprise CCMP

  WPA2-Personal CCMP

  Authentication and cipher supported in ad - hoc mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  Hi all

  I had this problem and I solved it.

  The solution is:

  1. go into Device Manager.

  2. click on view and then on "see the hidden devices.

  3. go down the list of devices and expand the "network devices".

  4. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  5. Select activate

  6. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  7. After this, the connection should appear.

  HTH

  Anas Jalal

  Kind regards

• Pavilion dv6 3050ej: my Pavilion dv6 3050ej laptop support SSD?

  Hello

  My Pavilion dv6 3050ej laptop support SSD?

  If so, should I pay attention to something special when choosing my SSD drive model?

  Hello
  
  Yes. Samsung 850 Evo SSD is currently available in the market good.
  
  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/4150017/model/4212919/document/c02435719/
  
  You can either clone (using the Samsung migration tool or tools 3rd part), factory reset (with the support of HP recovery) or pure install (if you have the disc to install Windows 7 Home Premium 64 - bit, and you can clearly and legibly read all 25 characters of the activation key of the product to the rear of your laptop).
  
  Move all your personal data on the external HARD disc before the cloning.
  
  Concerning
  
  Visruth

• HP Pavilion 14-b150ej Sleekboo: my HP Pavilion 14-b150ej Sleekbook supports WiDi/Miracast

  Hey,.

  I would buy the "N Microsoft Wireless Display Adapter" and I want to know if my HP Pavilion 14 - b150ej Sleekbook supports the WiDi/Miracast.

  THX.

  Hello

  Finally, I was able to get the "Microsoft Wireless display adapter" by a friend, it's WORK!

  Thx for all the help.

• Pavilion 13 s102tu: flight

  How can I find my cell phone and fix it if it is stolen?

  (My laptop is a hp pavilion 13 s102tu.)

  Hello

  Please, please check these articles and links:

  > http://www.howtogeek.com/235083/how-to-track-your-windows-10-pc-or-tablet-if-you-ever-lose-it/

  > http://trendblog.net/track-stolen-laptop-without-installed-tracking-program/

  > http://www.hongkiat.com/blog/best-apps-track-stolen-laptop/

  > http://www8.hp.com/us/en/business-services/pcandprintservices/tracking-and-recovery.html?jumpid=va_81h2ytp7xu

  Track and locate is not very reliable side user, because any trained criminals will never use your operating system. Instead, they will be clear the data reader / and install their own operating system, so software followed rendering went/useless. In addition, monitoring of the software is just approximate but not exact. Only lovers will be victim of the tracking software.

  Better would be to secure your data and keep the computer always with you or locked up in a safe place to avoid loss.

  If you find my post helped, please use the button to mark it as an accepted solution. Feel free to post again if something is not clear.

• HP DeskJet 930C color: print to DJ 930C of HP Pavilion DV4 - 1287CL on a home network wireless.

  I'm having a problem with my DeskJet 930 C.  It is a very good printer and worked for many years.  It is connected directly to a desktop PC running Win7 (32 bit).  I recently acquired a HP Pavilion DV4 - 1287CL (64-bit) and it attached to my home network.  I thought that I would be able to print remotely from the new laptop, but I have failed so far.

  I downloaded programs HP solves printer installation problems, and this has helped me to find a driver for the Pavilion.  This driver works fine if I connect directly, via a USB cable to the printer.  However, if I try to print over the network, it does not.

  I wonder if the problem has to do with the fact that my office use Win7 32 bit, while the laptop is configured with Win7 64 bit.  Is there an incompatibility problem?

  For now, I'll be able to print by connecting the laptop directly to the printer, but I'd largely be able to work remotely on the laptop and send data over the network to the printer.  Is this feasible?

  Thanks to anyone who can offer help!

  Tom.

  Well, it has finally decided to work!  After trying everything I could think of, I went back and remove the printer flag and started from scratch.  I've implemented the homegroup network, allowing the use of the printer on the network.  Then, I pulled up the "Devices and printers" program on the Pavilion and added to the printer.

  It showed immediately on the Pavilion as being available on the network, and I chose that the printer is connected.  Nothing to it!

  So, I conclude that I did simply something wrong the other day when I tried to connect to the printer.  If at first you don't succeed, try and try again!  Or, in the case of computers, all clear and start over!

  I'll mark it as "resolved".

  Tom.

• You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  Crystall ball says you are trying to install a version of Virtual PC on some versions of windows and your PC apparently does not meet the system requirements
  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

• Wi - Fi connection error: the hosted network could not be started.

  Original title: need help Urgent

  I get this error message. I'm not able to start the wifi sharing in my lenovo ideacentre desktop. I'm not able to see the microsoft wifi adapater everywhere in my office, even in the Device Manager and the adapter option Add.

  C:\Windows\System32>netsh wlan start hostednetwork
  The hosted network could not be started.
  The group or resource is not in the correct state to perform the requested operation.

  Hi Siddha,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

• I use a computer laptop xps 15 in which I want to use my computer laptop wi - fi as a bt hotspot it gives me error that Microsoft hosted network is not available

  Dell xps 15 laptop with windows 7 Home premium 64-bit
  processor Intel core i5 2.30 GHz

  Hello tejashande,

  Thank you for the question!

  It is disheartening to know that have problems you with the computer laptop wi - fi. As I understand it, you get an error that Microsoft hosted network is not available when you use the computer laptop wi - fi as a hotspot.

  I need to ask you some questions to help you best.

  1. What is the exact error message related to networks hosted?

  2. is it works much earlier?

  Download and install the Wireless driver from the link below and check.

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/3854.XPS-15-l521x-Windows-7-driver-cab.aspx

  Answer to us if you are having problems with a Wi - fi connection or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.