HP Pavilion 14-v043tx: laptop stays on after turning it off

Similar Questions

• W510 LED next to the fingerprint sensor stays on after turning the power on power off

  Just got W510 (4318-CTO, i7, 16GB, Windows 7).  After the green light on the left side of the fingerprints off the power sensor stays on, even after the removal of the AC adapter, close the lid, lid of reopening.  Removing the battery is the only thing it turns off.

  I hit the sensor and the green light came out and a red on the right side then flashed the Green came out again.

  Bob

  It's normal.  You can turn on your laptop and log in all with a single blow.  Try it.  Power off your system and then drag your finger.  If it's a good shot and it is recognized, you are to go turned off to the turning on and connected in your office all with one shot.  You won't even have to re-do slide to authenticate with the operating system.

• Pavilion: stuck on "Diagnose your PC" after turning the power on

  Hi Im having this problem... after I got the administrator password or power on password issue, that has been fixed with your help... its now been sitting at the screen "" diagnose your PC"" since then... its been over an hour? Help, please!

  Looks like a problem with the hard drive. I have seen that also trigger a sudden asks for a password when none was set.Computers to do weird things sometimes.

  Stop it, wait a few minutes then power up. Immediately, press the ESC key. In the menu press F2 System Diagnostics and test the hard drive.

• XP hangs after "loading your personal settings...". ». Boots fine after turning power off and turn on again.

  This has happened since the installation of ThreatFire.  Freezes when you 1st start of the day, with success during the 2nd test.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• Why the on screen keyboard after turn it off?

  I continue to unchecking the checkbox in the ease of the excesses, but it comes back.

  Hello

  Did you all please change this problem?

  You can try a system restore to a prior restore point you have been affected by the issue.

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  If you have found the keyboard without a title bar, then you can try to disable Tablet PC optional components in the Windows features list. Follow the steps.

  (a) go to Start and click on Control Panel.

  (b) in the Control Panel, open programs and features .

  (c) click Windows turn on or off features in the left column of the window programs and features.

  (d) uncheck Tablet PC optional components.

  (e) click OK.

  (f) click on restart now to restart the computer.

  Reference:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  It will be useful.

• Pavilion dv6-3225dx: laptop fails to boot after upgrading RAM.

  Hello

  Recently, I tried upgrading my laptop RAM 8 GB which is max you may have to wait. The RAM sticks were (x 2) DDR3 4 GB Samsung 1600 12800 mhz 1.35v. The system has detected the new RAM, showed the new memory and even spent the memory test. But this isn't the windows startup. I tried to clear CMOS. But without success. Do not let me windows. BIOS version is up to date (F29). Is there any setting for this?

  Thanks for all the help!

  Hello:

  Please see this discussion.  It must be very picky about what memory you use in your model series...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/Pavilion-DV6-Windows-10-wont-boot-after-memory-upgrade-4Gb/m-p/5776161#M359223

• HP Pavilion 15 PC laptop: laptop won't boot up - stays on the black screen

  My computer was working fine and then all of a sudden the screen went black.  I turned the power on and it came up with the error message "Unmountable Boot Volume" and then tried to solve the problem but just stayed on the screen black and never solved the problem.  I turned it off, did the hard reset when I remove the battery and hold the power for 15 seconds, but it's always the same.

  I went into the mode where I can try to restore the computer but it does not allow me to do. They say it restores and then just black.   I also ran a report where it says that the problem is "short hard drive DST Check: failed ' and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03.

  If there is nothing that can be done to help me I would be really happy I have use this laptop for work and really need to get it back running of emergency with minimal cost.  Thanks a lot for your help

  @Amyynatalia,

  The pleasure is all mine!

  I'm afraid not, you will be asked to pay more for the replacement drive as its not covered by the warranty.
  
  Keep me posted!
  
  Kind regards

• Pavilion DV4-2040us: laptop cannot go further after turning on with blinking LED

  It stops after turn it on for a few seconds and Caps Lock and Num Lock LEDS Flash at all times (once per second, and on and on).
  What it means?  It turned out just to be like this, after that he went on hibernation, last week.

  Help, please!

  Hi @Minou1296,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post and I understand that your laptop is unable to start, and only the light flashes. I wanted to help.

  You can use the document below for troubleshooting:

  Computers laptops HP - computer won't start (Windows 7, Vista, XP)

  Flashing light usually indicates a hardware problem. If the troubleshooting steps do not work for you at the link above, you can use the http://www.hp.com/contacthp to create a folder for your problem and contact HP.
  If you do not live in the United States / Canada, please click on the link
  http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html for details in your area.

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• HP Pavilion 15 laptop does not properly turned off

  Hi everyone, I am faced with a wireframe, annoying problem with my less than a month old HP Pavilion Notebook 15-p029tx.

  Sometimes, after pressing 'Shut Down', within the screen 2 seconds turns black, but the laptop would not extinguish itself, i.e. fan and power lights stays on always (once, I waited for 1 hour, like only the screen off & pc does not respond, occurs at the same time plugged / battery power). So, I press the power button for 5 seconds to turn it off. The next time he acts as restart, i.e. takes longer to boot and windows plays the startup sound.

  This kind of wired issue does not occur on every stop down. It happens probably once in two days of use. Standby, hibernation works very well.

  Configuration of the laptop: Pavilion 15-p029tx; 4 GB; Intel I3; 2GB NVIDIA; 8.1 Windows x 64 only language; 1 TB HARD DRIVE. Latest version of Windows, HP drivers, Antivirus updates are installed. PC is in good condition (defragmented HDD, registry, Ccleaner cleaning). Does not overheat is not possible: I have cooling pad and the weather is cold here.

  Steps I performed to fix the problem: Updated to latest Bios F.12; Reset bios default setting; made all the system from the bios, no found error diagnostics. Today, I run 10 stop test with different conditions, but it has never happened during the tests! Also all the usb ports give power during this gel.

  But I don't know, I would have to hold down the power button / stop again in the next two days.

  Experts please help me to resolve the issue, its very annoying when I'm in hurry, hurry to stop, lid closed, and next time, when I leave the laptop in the bag, it would always be running / power!

  Sorry for my bad English.

  I found the root of the problem. The culprit was Mcafee. After you remove Mcafee, it works well!

• Pavilion 15-n005tu: laptop does not completely close down

  Hi, using the 15-n005tu Pavilion. The laptop can not completely stop, after the screen turns black, power light comes on over the wifi light. The fan on too. I tried to do an update of the bios and chipset, but this has not solved the problem. Kindly help...

  Mathew

  Hello

  Try disabling the hybrid Windows 8 start - you can do the following.

  Right-click in the battery icon in the taskbar and select Power Options - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• My pavilion dv2418nr wireless light stays orange

  My pavilion dv2418nr wireless light stays orange, you don't go to the Blue will not recognize the connections surrounding neighborhood.  ISP says that the router is fine, this is the switch of the laptop not allowing the card read wireless connections. HP tech told me plug Ethernet from the router to the laptop... I got on the internet very well... but it isn't a hard connect.  Anyone had this problem with their switch?  I think that until this little light turns blue, I have better luck.  Thanks for your help

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

  

• HP Pavilion 15: HP Pavilion computer 15 laptop

  Help!

  Of course, my laptop has the drama when it is just out of warranty. Last night, I was doing a word doc - and it just froze so I turned it off and when it's loaded - he had a BLUE SCREEN and said:

  RECOVERY

  Your PC/device needs to be repairded - I know not why/what/how - BUT I was lucky that I had asked the system recovery disc.

  I did the 4 disk - was all work - done all updates ect.

  Today {(samedi 15 octobre 2016)}

  Working on a doc word - next minutes the screen started going gray with a few lines ect

  IV turned it off - took battery off-turn back - power upward BUT the screen is grey copmplety - Now still a virticle lines.

  IV tried touching the same - f10-screen and it beeps at me!

  F2-screen is the same

  I have photos and videos

  Please Help - I can't afford a new laptop

  HP Pavilion 15

  Product no.: P3C83PA

  Edition: Windows 10 home

  System: 64 - bit

  
  
  Kind regards
  Sonia McMahon

  SoniaM

  I wish I had some good news for you, but I did not...

  It seems that the screen has turned off, at least while it runs Windows.

  About all you can do is that this point is to try to run some diagnostics incorporated - since the PC does not have Windows for those, I hope that the display will work.

  Turn off your laptop, restart and continue to press F2 until you get a menu on screen or it starts to beep.

  When the menu is displayed, choose the option run diagnostic - and report what is happening after that.

  Good luck

• Pavilion DV6-2010sf: HP Pavilion DV6 Sound no longer works after Windows upgrade Windows 7 10

  After upgrade to Windows 7, no noise, even with icons on the screen at the bottom left and keyboard sound ON display.

  ATI driver high definition Audio Device was running OK.

  Audio CODEC IDT High definition driver was NOT working and unable to do so.

  I ran Windows Update but who has installed a new version of the drivers and Audio CODEC IDT High definition driver now works OK, still no sound even with icons indicating it is under tension.

  The HPSupportSolutionsFramework of the HP utility that is supposed to help can be downloaded: 10 seconds after download starts, it will stop ith error notification (and no explanation).

  Any help welcome.

  Hi @JFR77,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and no sound after a updated Windows 10. I uninstall that I listed in the audio, video and game controllers first and reboot the laptop. Then download the driver Audio IDT high definition (HD).

  You can try:

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  Here is a link to troubleshoot the sound.

  Please let me know how it goes.
  
  Thank you.

• Pavilion 15 PC laptop 15-n004TX. Ubuntu "the system is running in mode low grphics.

  HP Pavilion 15 PC laptop 15-n004TX. It came with ubuntu. 1 GB Radeon grphics card.

  I reinstalled ubuntu 14.04 completely formatted drive. After installation, on reboot, it gives the error:

  "The system is running in low graphics mode.

  Your screen, the grphics card and the parameters of the input device could not be detected properly. You must configure these yourself. »

  And then runs in the user interface of characher does not detect the usb, so I can't install the drivers.

  I tried to install ubuntu 12.04 also.

  I tried to install it in legacy mode.

  I tried using the OEM manufacturer.

  In any case the same thing happens.

  Help, please.

  I want to use my computer.

  MKM-ubuntu-req wrote:

  HP Pavilion 15 PC laptop 15-n004TX. It came with ubuntu. 1 GB Radeon grphics card.

  I reinstalled ubuntu 14.04 completely formatted drive. After installation, on reboot, it gives the error:

  "The system is running in low graphics mode.

  Your screen, the grphics card and the parameters of the input device could not be detected properly. You must configure these yourself. »

  And then runs in the user interface of characher does not detect the usb, so I can't install the drivers.

  I tried to install ubuntu 12.04 also.

  I tried to install it in legacy mode.

  I tried using the OEM manufacturer.

  In any case the same thing happens.

  Help, please.

  I want to use my computer.

  Hello

  Install Intel first, then ATI drivers...

  http://www.omgubuntu.co.UK/2013/04/Intel-release-graphical-installer-for-their-Linux-drivers

  http://www.securethelock.com/2014/04/20/installing-configuring-amdati-drivers-Ubuntu-14-04-trusty-tahr/

  BTW: as a linux user, I highly recommend to create a backup, the recovery discs before you do something like that.

• Why my laptop restarts automatically after shut down when connected or not connected

  Hello Sir, I have HP PAVILION DV4 series laptop. I am currently using WINDOWS 7. But since 1 month it appeared the problem, my laptop automatically restarts after you close when it is connected or not connected. After that I end my laptop shut down normally. Any help would be appreciated.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I would be grateful, if you can provide us with the following information to help us better understand the question?

  1. have you made changes on the computer before this problem?

  2 you receive error messages or codes to the computer restarts?

  I suggest you to follow the below methods and check.

  Method 1: perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2: System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the question did not resolve, try Method 3.

  Method 3:

  You can view the steps proposed by cavehermitt in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-computer-restarts-automatically-after/daeb457a-3509-4BE9-a85b-2935c8c3e108

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful. Please let us know if you need help with Windows.