HP pavilion 1410n starts and questions of fan pls help

Hi everyone im new and here I need help with my HP Pavilion 1410n. Ive had my office stored for like a year since I have a laptop I don't use any, yesterday, I decided to take it to find some of the files I needed, but when I turned it on it does not start at all, and all this I can hear is the fan connected to the motherboard running non-stop and does not show me anything in the monitor.ive never had this kind of problem before Ive had for about 6-7 years ago until now since I bought it thanks in advance

Try a hard reset as follows:

(1) remove the battery and unplug the DC power adapter.
(2) press and hold the power button for more than 15 seconds.
(3) plug the DC power adapter (leave the battery for now)
4) press the power button

Please post here your positives or negatives in your thread.

Tags: HP Desktops

Similar Questions

  • HP Pavilion DV6710ea - starts and powers then off and repeats (no display)

    Hello

    I hope that someone here has the answer to my question, so this is.

    The laptop starts (be it battery powered off or just AC) for about 3 seconds, at that time, I hear the rotation of the drive upward and the fans but no beeps.

    I did the hard reset and hold the power button for 15 seconds without the battery or AC.

    The next of CAPS and numlock not LEDs in all during one of the sessions u power.

    I tried to replace the RAM and HARD drive nothing works.

    I connected external monitor for computer laptop and updated, but still the powers of unit turned off and then on and then off etc...

    Before this problem, the screen is blurry and dark, and then on the road.  Nothing has been spilled on the laptop to my knowledge.

    Thank you for your help with any suggestions you may have.

    Thank you

    Andrew

    Marvin: Behold, brain the size of a planet, and they ask me to take you to the bridge. Call this job satisfaction, because I do not have.

    Hello

    After the reinstallation of the hard drive & memory if you have the same problem. Please contact HP support and get verification from the motherboard replaced details of warranty with technical support.

  • HP TouchSmart 300-1120 do not start and with noisy fan

    Hello

    Children were using the PC and recording of large amount of data (about 30 GB) on desktop? Suspecting this could be trigerred overheating that caused the major failure. The dust was found on the heatsink, but nothing was completely clogged.

    When you press the power button, no startup process is initialied and the fan is too loud like a helicopter. Tried the reset of that power on the power button but nothing done and the same thing happened. HARD drive is quite slow during the withdrawal and during the data recovery attempt, which succeeded, after all. Any suggestions please?

    Thank you.

    Hello again @nedzads,

    Thanks for the comments on my post, that they are appreciated. Given what you said and asked about your computer, I will say this. First with many HP computers there are different motherboards that can be used in them. Unfortunately, yours is not one of these. Far as I can see the only motherboard recommended for your computer is the motherboard of Jesse. However, I can give you a bit of advice. Based on what you have said is no longer functional and need to replace I advise you to contact HP Technical Support before commit you to a project like this. Technical support HP has alternatives that may be less expensive and provide you with a computer that is already updated. There is nothing to say that we must commit to anything, but it would be worth the trip I think.

    HP - 800-474-6836 technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

    Thanks again for your post on the HP Forums. Have a wonderful day!

  • Message... BRS .exe program cannot start because msvcp71.dll missing. pls help.

    am under win 7, 64 bit. had something to do with HP 3 in 1 printer to the PC by using remove normal within devices/printers, as it had played all of a sudden, with difficulty (failed) reinstall removed!  a centuries-old HP drive for my system!, costumes to previous win and also not taken in charge now.

    also ran a file temporary cleaning via system tools and defragmented.  wake up message now on start... as above.  a scanner sfc, not found any internal breach. What is brs exe? and the dll file can be found somewhere in the SP and installed, which it is, why it is absent? reviewed 1 addictivetips.com solution proposal.  also found 1 suggestion to peer into MS Visual C ++ redistributable. Looks like once your out of warranty free very little real bug and help $free is available.

    Thank you.

    MG.

    msvcp71.dll is not a Windows file, it is a Visual Studio .net file and it is distributed by software vendors, you can have different versions of the file in the directories of different programs.

    John

  • Pavilion 15 series: BIOS password reset. Pls help

    I will need to do a system restore after its password forgotten
    Then, I will need a new password for the Sys disabled error Halt: (69364085).

    Any help is appreciated.
    JA

    Hello:

    Enter the unlock code...

    76042001

  • HP pavilion dv6 Notebook PC: question seeks to get drivers for my ATI Mobility HD7470M updated

    Can't find update drivers for my laptop Hp Pavilion dv6 smart who has the graphics card ATI Mobility HD7470M, once recommended with AMD driver auto-detect mess to the top of the resolution and the only solution to that is a system restore.

    AMD Catalyst center can't find updates for 2011.

    Thanks for the help

    See you soon

    Hi @lancer71 ,

    Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your Hp Pavilion dv6 Notebook and questions with looking for a new driver for your ATI Mobility HD7470M.  The driver will change not only updated. If the device works properly I wouldn't try to change the system.

    Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

    Thank you.

  • Get beeps when the computer starts and does not start

    Original title: Hello I have Mo Intel DG31PR & 2 GB Transcend RAM while the switch on it give beep 4 times and you would be in this case for several attempts does not start and it begins so please help and what is the problem?

    Nothing more to say

    Pravin Dave

    Hello PravinDave,

    If we get the beep codes and the machine will not move past, then we have hardware problems.

    You will need to contact your hardware manufacturer for more information on the beep codes and their meaning.

    Best regards

    Matthew_Ha

  • Computer starts and restarts in an infinite loop at startup.

    Received this e-mail from Comcast around 2 April 2013 stating my computer may have a 'bot '. This function constant guard of Comcast. On 5 April, my computer started this start and restart * in an infinite loop. I took the computer manufacturer and all wiped out settings. Comcast removed free Norton antivirus and replaced by Webroot. When the infinite loop finally stops, I just leave the computer on and log off because if I stop, it will begin to restart in an endless loop. I used MicroSoft's analysis and Webroot finds no Malware since I restored it to the constructor parameter. I don't understand??? It does only as long as my wireless light on my laptop. If I boot my computer and disable immediately any connection to the internet, there are no endless loop. I get the desktop to the top and turn on the wireless on my laptop and the computer begins to restart. My daughter uses her Tablet without any problem the same modem wireless. I always get this duplication of constant guard of Comcast email. I sent email them back and ask them if they are sent, and if it was a fake, and their response was like they didn't know what I was asking. Knuckleheads! I am lucky to be online now. He ran into an infinite loop, start and restart hours today. Help!

    Hi Michell,

    1. don't you make changes to the computer before the show?
    2. What do you mean by "I have always received this e-mail from duplication of constant guard of Comcast?

    Method 1: I suggest to disable automatic reboot and then check if the problem persists.

    (Including safe mode) advanced startup options (disable automatic reboot system error)

    http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

    Method 2: I would say too you will observer event logs to check what is causing the problem.

    Open event viewer
    http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

    What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-in/Windows7/what-information-appears-in-event-logs-event-viewer

    Post us the results once you try the steps above.

  • How to create services start and stop the script of automation for different servers

    Hi all

    I want to create a file bat for automation object, start and stop services
    I have some services in 1 server and a server in 2nd and some servers in 3rd.
    has you all know that I have to follow the sequence to start and stop services can all help me in creating .bat combining 3 servers fo start and collapses of the services.

    Thanks in advance

    Concerning
    SM

    the location of your batch file should not matter

  • Mac does not start and the fans going crazy

    Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?

    OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.

    SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.

  • Re: Tecra M11 sudennly freezes and the cooling fan starts to run

    My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

    Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
    Clues?
    Thank you

    You must understand that on this virtual path, it is not easy to say what the problem is here.
    I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

    Try to check in the Task Manager, if something like that happen.

    I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

  • Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

    My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

    * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

    Hello

    If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

    If it is under warranty, contact a local reputable computer repair workshop

  • HP Pavilion g6 1014sa problems starting and complete hard drive (305)

    Hello

    Out of the blue, my laptop just stopped starting sometimes.  It didn't fall or anything.  The screen remains black after start-up and only the fan turns on.  Verified the external monitors etc.

    He occasionally start and I have usually press f10 for that to happen.  I ran the diagnostic tests and memory, we came back ok.

    Disd hark test rises "hard disk complete 1 (305).

    However when I leave configured BIOS, windows starts normally and works ok for a few days.  So is there really a problem with the hard drive?  This would explain why it won't turn?

    The laptop becomes quite hot enough quickly also, this can be explained by the error of hard disk or is it do? I don't want to buy a new drive hard to make it happen.  Is it POSSIBLE to repair a hard drive or replacement is the only option? This error is certainly correct?

    Thank you

    Michael

    Hello miklc:
    I'm here, but I don't know what is your solution. frrw I get a solution resolved says the error message (disk hard 1The (305) means your drive hard fails to replace the hard drive.) http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/G61-110SA-hard-disk-1-full-305/TD-p/1932921 Same error but on another HP computer. That's all. You're welcome frrw. There is a solution easy to. just get your HDD on HP parts store tour, directions to replace is on the page to update your computer under the section. Very simple task. Now, it's the right time to back up your computer while you still have a chance to while waiting for your new hardrive. You're welcome frrw.

  • Why my computer pavilion laptop, it starts and seconds later, just stops

    Im working on a pavilion entertainment pc and when I go to boot it it stays on for a brief second then stops I was wondering why its done this for as far as I know nobody has never opened to make adjustments

    Hey Sonny.

    There are a ton of questions that could cause this. The most common is a failing hard drive or it overheats. Since its only on a brief second I would try a hard reset, followed by the disk hard self-test.

    Perform a hard disk of that test
    Hard reset your laptop

    I would like to know if one of these help.

    Thank you
    Sean

  • Satellite A30 554: start and stop the question automatically

    After about a year of use my computer laptop (Satellite A30 554) started having problems with the starter. Quite often when I turn it on cooler starts working and the LEDs are showing that the computer is on, but the screen remains black. Sometimes, I need to turn off the PC and on a couple of times so that he can start to begin. What is the reason for this and can it be resolved?

    Once I had a problem with this computer off by itself while working, which was not caused by a virus. Some people advised me to vacuum clean :) under cooler. I did and it helped.

    The problem was supposed to be linked to the dust on the heatsink, which does not allow that it works correctly. The current problem also connectable to the cooler, or is - it a motherboard problem?

    Hello

    Generally speaking, if it starts and does even not initializing the monitor, or starts and turns off immediately, it could be the motherboard. It helps to remove each device at a time and try to start the computer. Sometimes when the parts become defective they still affect the ability to start. If, after removing all devices, that the problem persists, then your motherboard is faulty and must be replaced. Hope that fix you the problem.

Maybe you are looking for