HP Pavilion 15-p060sr: sleep/stop problems

Similar Questions

• HP Pavilion dv6809us [portable] sleep mode problem

  Product name: HP Pavilion dv6809us Entertainment notebook PC

  Operating system: Windows Vista editions Home Premium

  Problem: When I "close cover" or "click on the sleep button" to leave the sysem for enter in standby, the monitor is turned off quickly, but the system is still running. After a while, the system reboots automatically. Because the screen is off, I see nothing happened there.

  Please suggest.

  Hi Sai_Krishna

  When your computer turns on, you're always running of programs or are they shutdown?

  Certainly, sounds like a problem of standby or Hibernate, see the link below for some more information and some troubleshooting steps.

  http://support.HP.com/us-en/document/c02076993

  Thank you

• HP Pavilion 15-p247sa 15.6 ": problem with Hybernation - HP Pavillion

  Hello

  I have problems with my HP Pavilion laptop since update to Windows 10 a few weeks ago.

  My laptop works fine until I hit the power button or close the lid to hibernate the PC. When I try to wake up the PC by re-opening the lid or hitting the power button / nothing happens, the light on the power button is still on but the PC won't start and the screen remains blank. I have to remove the battery and put again before hitting the power button to restart the computer, even if it isn't a critical error it's boring and inconvienant to reboot the PC in this way, because it's a total system reboot.

  Can anyone help?

  Thank you

  Jamie

  No worries that the fix was found a lot of people have had this problem proceed as follows.

  HOW to SOLVE SLEEP/STOP/set Hibernate ISSUES

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
     • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
     • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
     • In Control Panel, select administrative tools, and open Services.
     • Go to Windows Update and double-click it to view its properties.
     • Click on stop to stop the service to run.
     • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
     • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep, stop and hibernate again.  hope this helps

• HP Pavilion Entertainment PC features stop... Webcam, dvd player, sound, fast hot.

  My hp pavilion heats quickly and stopped some features, like the webcam, dvd player, now sound. All that I can do to savage this? I'm out of luck

  on that? Not under warrantly more.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3, which operating system are you using?

  I suggest you contact the HP support team for assistance on this issue.

  http://h30434.www3.HP.com/PSG/
  http://WWW8.HP.com/us/en/support-drivers.html

• How can I get the function of hibernation in the menu with; Log, the user swith, sleep, stop.

  I used to have the function of hibernation on my laptop as pets when I could also log, user swith, sleep, stop.

  But the hard disk had to be changed, and now the hibernation has disappeared from the list, how can I get that back.

  I was told it could be done in the start menu or the customization options, but have not found anywhere.

  Hibernation turned out to be more useful.

  Try this tutorial: enable or disable Hibernation
  http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  Also, please read two method on disk cleanup deletes Hinbernation option in the list.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Pavilion 15 p-018tu: laptop HP with windows 10 stop problem

  My HP laptop is Pavilion 15 p-018tu with windows pre-installed 8.1 unilingual. I've updated to windows 10 about a month ago. Now, my laptop is not properly blocking down. The screen goes black but the power button light turns on for a long time and it lights never out. Whenever I had to press and hold the power button to stop it. I found on the internet that downgraded to management engine intel version 9.5 will work, but my engine management intel is version 9.5. Now what to do? Is there a permanent solution?

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  I just checked and I see that your computer (this model) does not officially support Windows 10, meaning never officially exit HP Win 10 drivers for this device. http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/5355006/model/5393349

  It is made in the implementation and tested with Windows 7 or 8/8.1.

  I recommend that return you to Windows 8.1 (your previous version of Win) in order to solve this problem and to have a fully supported features.

  If you upgraded to Win 10 less than a month ago, you can use the built-in options to return to the old version of Windows, as explained here > > http://www.howtogeek.com/220723/how-to-uninstall-windows-10-and-downgrade-to-windows-7-or-8.1/

  If you upgraded to Win 10 more than a month ago, you will need to perform a system recovery to factory default state HP recovery. More information:

  > > http://support.hp.com/us-en/document/c04758961#AbT9 and

  > > http://support.hp.com/us-en/document/c04758961

  Windows 8.1 is the right operating system and will be well supported by Microsoft until 2023.

  Before making a drop of ratings, please backup your important files on an external device to cover yourself / your information / against potential incidents.

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• HP Pavilion dv7 button walk / stop does not

  Hi, I recently had my Hp Pavilion dv7-1245dx Entertainment Notebook (to the best of my knowledge bc, I can't look it up in my product number) fixed some viruses and malware that caused random stops and freezes. My laptop worked fine after that the fix so I installed the latest updates to better protect my laptop but when I left and my laptop came into fashion 'sleep' it would not respond and the screen was black. I stopped using the power button and it turned back. The computer does not start and the flash caps lock button three times which means a problem of memory, according to HP support, that happened before I got my laptop fixed. Later, I unplugged the AC adapter and moved my laptop but when I tried to put it on the power button does not respond and I can't do anything with my laptop. Both recommended options for the issue of cap locks and the power button is to go inside my laptop and tinkering with the battery and the memory module. I'm very hesitant to do so for fear of further harm to my laptop. I am on Windows 7 and advice on what I should do would be greatly appreciated. (will give you more information if necessary)

  With respect,

  ACertainGuy

  Your notebokdoes have removable covers for the module of memory in the bottom of the laptop. It's just as shown in the document I linked.

  You will need to buy a Jewelers screwdriver set.  A jewellers Phillips scredriver is necessary.

  Here is a link to a documentthat explains the flashing LED error codes and what they mean.

  The only other option, if you do not have enough confidence to do it yourself, is to take your laptop in a shop that will do it for you.

  Best regards

  ERICO

• Sleep mode problem

  I have a problem with my mode 'sleep' on my Pavilion laptop 15-n050eb. This takes place since I installed windows 8.1

  When I manually put the pc to sleep I get a screen black still makes the noise but it won't wake up.

  When he falls asleep himself, it's like he stops then when I wake up it upwards (only possible with button / stop) all programs are closed and it takes a lot of time.

  I tried the bios update and drivers and searching online for answers, but they do not seem to solve the problem.

  Hello @Tilia,

  I read your post on how your laptop encounters a problem with wake up from sleep mode, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your settings to effectively use power management "sleep mode" on your system.

  In addition, you can also restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Pavilion G7: Laptop suddenly stopped working after applying an update

  So I was watching netflix and I got the warning that I had five minutes to shut down the computer or it would be closed himself so that he could catch up. I had done the things in closing and stop it by pressing the power button and in now supported.  Then, I turned on the computer laptop back and he started to update so I zoned out of it and watched something on my phone. While doing so I noticed some type of error message update and do not touch, it's because the last time it happened that just rebooted without the update. However instead he himself off and does not turn around. I tried to hit the buitton of power to reactivate and that did not work. I also tried the suggestions I found on this website to support such as take out the battery and unplug the power adapter to the power source.

  Hi @Spinto46,

  Thank you for the update.

  You have determined that the adapter works, it could be in the laptop power button.  The laptop will require a repair.  Please contact HP support for service options. They provide you with an estimate before performing any repairs.

  Contact HP to Contact HP Support assistance

  If you are not under warranty, a local repair shop should be able to provide an estimate also.

  If you want to consider replacing it yourself to see what is the matter, here's a link to the:

  HP Pavilion Notebook PC Maintenance and Service Guide of g7

  Please note Chapter 4, page 52 for replacement part number and removal and replacement instructions.

  For your convenience, here is a link to the:

  HP parts store

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  Also, by clicking on the ""Thumbs Up ' below is a great way to say thank you! "

• Satellite Z30 - A - 1 d 0: No. Wlan after fashion 'sleep' / touchpad problem

  Hello!

  I bought this laptop in early September and I am super happy with it, but there are two little things that annoy me and I was not able to fix yet:

  (1) exit standby or sleep mode, it is re - connect never automatically for the wireless on it's, I have to do it manually every time. Windows wireless works well, so this isn't it, but what is?

  (2) sometimes the touchpad will stop working randomly and I have to use a mouse or restart to fix it. I reinstalled the drivers for the touchpad. Turning the touchpad/disable using function keys does not resolve the problem.

  Any help would be appreciated!

  Yes, the Intel® Dual Band Wireless-AC 3160 pilot was published on the Intel page, and looks like this driver is more recent than the one provided in the Toshiba page.

  Here you can get the latest version of the driver:
  https://Downloadcenter.Intel.com/SearchResult.aspx?ProdId=3776

• Pavilion g6: button Wireless stopped working on laptop HP pavilion g6

  The wireless button has stopped working on my g6 pavilion. I read that some people have had this problem.
  
  Anyone would be kind enough to help out me.
  Thank you

  Try to connect your laptop to the LAN (wired connection) or try to install Recovery Manager

  http://support.HP.com/us-en/document/c01868333

• Sleep, stop after upgrade to Windows 10 - The Solution!

  Hey all.
  
  Just uninstall Management intel Version 11 and 9.
  
  or install this SP and it will delete 11 and install version 9.
  
  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe
  
  that will solve the problem. 100%.
  HpSA will be updated around 11, disable the hpsa update
  
  Have fun!
  
  Professor.

  This solves all the problem with Pavilion and Windows 10.

  You can read my post here.

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-Hangs/Windows-10-updated-now-HP-Pavilion-won-t-wake-up-from-sleep/TD-p/5176160/page/17

  After my my many user help solve this problem.

  The page is to Big, so I made a new to help the new user to find a Solution.

  Have fun.

  Professor!

• Pavilion 15-N240ee: Wifi driver problem

  Hello

  When I close the lib (plugged), wifi turned off and my download stops

  all power saving settings is disable and lib is the 'status quo' (connected)

  I think that this problem is a bug in the driver

  Please help me

  Hi @MA88,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - n240ee and issues with the power settings when the lid is closed. Here is a linkthat shows you how to activate the away mode. It allows your computer to continue tasks, such as recording TV shows or sharing of videos and music, even if you're away from the computer. Specifically, when the computer is in Away mode.

  Please let me know how it goes.
  
  Thank you.