HP Pavilion dv6809us [portable] sleep mode problem

Similar Questions

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• Sleep mode problem

  I have a problem with my mode 'sleep' on my Pavilion laptop 15-n050eb. This takes place since I installed windows 8.1

  When I manually put the pc to sleep I get a screen black still makes the noise but it won't wake up.

  When he falls asleep himself, it's like he stops then when I wake up it upwards (only possible with button / stop) all programs are closed and it takes a lot of time.

  I tried the bios update and drivers and searching online for answers, but they do not seem to solve the problem.

  Hello @Tilia,

  I read your post on how your laptop encounters a problem with wake up from sleep mode, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your settings to effectively use power management "sleep mode" on your system.

  In addition, you can also restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• M125rnw: HP M125rnw sleep mode problem

  Hello

  Sorry for my English.

  I recently bought a MFP HP LaserJet Pro M125rnw.

  I installed the printer using the ethernet connection.

  I can't solve the problem with the standby printer.

  After a long stay in the mode 'sleep', the printer refused to print:

  1. I can't print from a PC with Windows 7
  2. I can't print from a PC with Ubuntu 14.10
  3. I can print reports using the WEB interface
  4. Turning to the wide on/off the printer solves the problem for a few hours

  Is this a problem with the printer hardware?

  When he goes to sleep, go to the menu of the printer and see if you can push the buttons to get the "sleep mode".  If you can, then the issue is probably with the driver you are using.  If you can't wake up the printer with the button, then you have a hardware problem and the trainer is probably defective.

• Satellite Pro A300 Wireless resumed after sleep mode problem

  OK, so I have this little 'itch' which becomes little boring sometimes. When I take my computer in sleep mode, it takes a good 30-40 seconds my Wi - Fi is reactivated. I mean, that's when my computer wakes from sleep mode and I'm in my browser, I get an internet connection for a good 30-40 seconds. I was wondering if there is some setting I've accidentally changed which makes my laptop to do this? Because I remember my laptop no this when I got it.

  Hey,.

  I agree with the user above. You should try the update the WLAN driver. Perhaps the current driver isn't working properly so an update should help you get rid of it. More recent and pre-tested WLAN driver that you can download on the official Portal of Toshiba WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  What operating system you are using?
  On Vista and Windows 7, you can disable in the settings of the WLAN energy saving feature Windows power management.

  Check this box!

• HP Pavilion 15-p060sr: sleep/stop problems

  Hello everyone.for last 4 or 5 months my HP Pavilion 15-p060 a face sleep and shut down problems. After heating to some extend, when I try to shut down my pc, the screen turns off but fan is still running inside and led is open. Moreover, when I close the lid and open after, again the same problem pc not wakes up to the top of the standby mode sometimes and I can't get into the bios screen either when I turn it on.

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the latest driver IMEI directly from Intel on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Help! Iconia A200 sleep mode problem

  My a200 iconia don't wake up once it is in mode 'sleep' from updating the system a few days ago. I have to plug charger and time keep the button twice to restart. I tried to reset the data, but it does not solve the problem. Can anyone help?

  try using SoftLocker. It is the only solution that I found.

• 'Sleep' mode problems and keyboard

  I have an intermittent problem when I SLEEP my Acer laptop - sometimes to wake up the keyboard does not work.  There is no echo of nature - nothing.  The mouse works fine.  So I restart and all is well.

  I installed Vista Service Pack 2 and the recent updates through KB973917.

  Any suggestions?

  Thank you

  Twila

  Hello
   
  If the appliance breaks down or is no longer works correctly after resume you a Windows Vista mode computer standby or Hibernate, then the best way to solve this problem is to get the latest Windows Vista service pack. If there is a reason why you are unable to install the latest Windows Vista service pack, the best thing is to get the hotfix that is mentioned in this article: http://support.microsoft.com/kb/929734
   
  As you have already installed service pack 2, you can try to install the patch and if the fix is not to settle, try to download the Microsoft fix it and install it.
   
  If the fix is not to settle, try the manual steps mentioned under fix it myself.
   
  NOTE: Before you run the manual steps, back up the registry.
  How to back up and restore the registry: http://support.microsoft.com/kb/322756

  If the problem persists, you can uninstall the updates that you have installed or run system restore, see this link for more information: http://support.microsoft.com/kb/948537
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Sleep Mode problems

  Whenever I put the computer on the mode 'sleep', it also puts my monitor on the mode "Eve". When I come back and shake the mouse to wake from sleep the monitor will appear for a little bit and then it happens mode 'sleep' and the only way to have access to the state machine is turn it off completely and turn it back on. Is there a way to fix this?

  Hello

  Microsoft has released the PATCH download and test the question.

  Follow this

  Click on start Orb > type cmd in the search box > right-click on cmd in the above results >

  Click on run as administrator - at the command prompt, type powercfg - devicequery (awakening of any key) > press ENTER.

  It tells you what devices can cause problems with the mode 'sleep'

  Also, update all device drivers, including the chipset, the mouse driver and the driver of the display card.

  Please run Windows Update and keep updated the system to date.

  In addition, if there is no security (anti-virus, anti-spyware) software installed,

  Temporary disable or deactivate them to check the result.

  If the problem persists

  You can also perform clean boot tests

  How to perform the clean boot:

  1. click on start, type MSCONFIG in the search bar and press ENTER to start the System Configuration utility.

  If the "User Account Control" window appears, please click on continue.

  2. click on the Services tab, check "Hide all Microsoft Services" and click on disable all (if it's not gray).

  3. click on the Startup tab, click Disable all, and then click OK.

  4 restart the computer and test the issue.

  ==> Boot minimum is a troubleshooting step.

  If some programs have been disabled during troubleshooting,

  We can allow them later. If it appears utility system configuration,

  Check the box "don't show me this message again" and then click OK

  It may be useful

  Nikhil

• Pavilion G6 2014TX: UEFI mode problems

  I have A Hp pavilion 2014TX G6...
  
  In my bios, I can see option to UEFI boot device...
  But when I try to boot from a boot UEFI disk made by Rufus the bios is unable to identify the startup disk.
  My pc does not support UEFI?
  My bios version is F.26...

  Here is the screenshot...

  
  
  Thanks in advance

  Never mind GUYS I solved the problem by using the older version of bios F.24...

• 4540 proBook s Sleep Mode problem Windows OS 8.1

  Good evening
  
  I have some problems with my Probook s 4540 in Windows 8 (the problem only occurs in Windows 7) during my sleep, he wakes up with a black-Sault llaptop screen caps lock light work lights are all normal, it's just the screen becomes black.
  I have switchable graphics:
  1 Intel HD Graphics 4000
  2 AMD Radeon HD 7650 M

  I don't know what to say I have a 64 bit OS I downloaded the drivers from the official site of HP and I have also tried donwnloading drivers in official sites AMD and Intel. I don't think that I have problems with graphics.
  And sometimes, when my screen stays off for a long time, it displays a warning in the task bar that the AMD driver is not resonding for more information please feel free to ask.
  
  After reading this, I want to thank you for you time I really appreciate it.
  
  Here is the proof that my drivers are ok:

  

  OK, the sleep problem is fixed now repair it just didn't download the drivers from offical HP Driver download page, update your drivers in Device Manager (restart your pc if you having any difficulties updating).
  
  If you have already downloaded the drivers try to use system restore or install a new copy of windows.

• Want 4500 sleep mode problem

  I just installed a desire 4500 on wireless network.  It works fine, but does not seem to get into 'sleep', i.e. display and button mode / stop brighter is not dim.  Anything else I can check or do?

  Updated - Update driver received notice and once installed, he's asleep now.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• "Sleep" mode Windows 7

  Computer analogue mode past 'sleep', says sleep and finally stops the computer.  You must restart the computer twice before, it will allow you to boot into windows 7.  How do I cut this feature?

  Hello

  How to keep Windows 7 to enter the mode 'sleep'
  http://www.ehow.com/how_5759560_keep-Windows-entering-sleep-mode.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• When I put the computer on the mode 'sleep' it goes into sleep mode and then restarts on its own.

  Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.