Pavilion G6 2014TX: UEFI mode problems

Similar Questions

• HP Pavilion dv6809us [portable] sleep mode problem

  Product name: HP Pavilion dv6809us Entertainment notebook PC

  Operating system: Windows Vista editions Home Premium

  Problem: When I "close cover" or "click on the sleep button" to leave the sysem for enter in standby, the monitor is turned off quickly, but the system is still running. After a while, the system reboots automatically. Because the screen is off, I see nothing happened there.

  Please suggest.

  Hi Sai_Krishna

  When your computer turns on, you're always running of programs or are they shutdown?

  Certainly, sounds like a problem of standby or Hibernate, see the link below for some more information and some troubleshooting steps.

  http://support.HP.com/us-en/document/c02076993

  Thank you

• G4-2040TX Pavilion: laptop does not start in UEFI mode

  Hi all. I have a problem with my laptop. In my laptop BIOS (InsydeH20 03.72.32F.26), there is an option to turn the traditional way. I formatted my drive of thumb (v220w HP 8 GB) to FAT32 using Rufus and create bootable UEFI with her. After that restart, change the legacy mode to disable, reboot again and it says 'Device not found Boot (3F0)', it's normal right? Since I changed the mode of inheritance, but after you press F9 (menu Boot Device), is empty. Return the error code and press F2 (diagnostic) because it focuses on UEFI too, but what I get is "diagnosis HP worm. 1.6.0.0"and I already installed ver 5.9.0.0, so I made a conclusion that my BIOS is broken/corrupted and touched my UEFI mode. All Solutions? Thanks in advance

  PS: Sorry if I'm a noob or my English is not good

  The tutorial will explain to a GPT format. Article will be also describes the creation of a system associated with EFI partition, which is required for an operating system to boot into EFI mode.

  Disable legacy mode is expected to start-up in EFI if the hard drive and the OS are configured in a GPT partition with a correct BCD file and the EFI partition.

  I would test this on a spare hard drive if I were you. I always do it this way to avoid the startup scenarios when no bad experience types of partitioning. It gives me a 'B' plan to fall back on, just in case things go south.

• T440s uefi boot problem

  Hello

  I recently bought a thinkpad T440s (bios version 2.27), I was able to boot xubuntu in legacy mode, but did not start using the uefi.

  As I do this is to grab the last amd64 iso xubuntu desktop, run isohybrid on it, finally "burn" on a USB.

  To start using the uefi, I tried many settings, with or without 'secure mode', none worked, tried on all usb ports, no luck.

  When Googling this problem, I found a lot of posts on dual boot with windows (which is for example in uefi mode),
  but I'm not concerned about dual-boot ubuntu will be my single operating system.

  I know on uefi help pages, but I find it hard to understand what is relevant or not in my case.
  I wonder if someone with close hardware, managed to install xubuntu (or another version) using the uefi.

  This post somebody would tell me how to proceed?

  Thanks in advance for your attention.

  Best account.

  Hello

  You have just taught me something about the iso images :-)

  I was finally able to start using the uefi, specifically, he started with the handling

  You told me (make a fat32 partition, copy the contents of the iso image on this score unique flash drive)

  but xubuntu is stuck the GUI front.

  I retried in raw by copying the iso image on the flash drive (dd if = of =....) without any other manipulations

  and it worked.

  Thanks for your help

• Yoga 20175 13 fresh install UEFI mode

  Hello.
  I had problems to install a new copy of Windows 8 in UEFI mode lately. The software I'm using is original, and I installed Windows 8 in other laptops with it have no problem. The situation is that it does not work, but I am able to use the computer with Windows 8. Everything goes well during the installation, on the one hand: in the end it does not show me the option to connect to the Internet wireless.

  Once I can get to install the Ethernet driver and try to turn it on, it shows me an ad that says that the key is already used by another machine.
  I know in the mode UEFI activation code is preloaded into the machine, and I'm not comfortable paying another key.
  Is could someone please tell me what I'm missing?

  Hi TheTechGal,

  AFAIK, the standard license for Windows is 1 license for 1 PC. Unless it's a Volume license key, you will not be able to activate Windows on another PC.

  You can also check the PC where you have used the product key and uninstall using the method below so that you can use the same product key to activate Windows on another PC:

  How to uninstall your Windows product key before you sell your PC

  Kind regards

  neokenchi

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• HP envy m6-n012dx: UEFI mode change in Legacy mode

  Hey I want to change my boot option to the legacy of the uefi mode mode. can someone help me.

  Hello

  If your HARD drive has of a table partition guid, the current operating system must be installed in mode "uefi" - the only way around this would be to reformat the hard disk with MBR and reinstall the OS using a startup (CD-ROM or USB key) option that does not have a suffix (uefi).

  Kind regards

  DP - K

• Install Windows 7 Pro 64 bit with UEFI mode

  Hello world! So I'm here to talk about the installation of Windows 7 for the UEFI mode and I know a lot of people said it stucks on "Starting Windows" during installation, but I have a few question that my opinion:

  1. If a hard disk has come to Windows 8/8.1 with OEM or retail as installed, it should disable Secure Boot?

  2. If Windows 7 it remains stuck, the solution most is all in a hard drive format after Windows 8/8.1 backup partition and install Windows 7 with UEFI without getting stuck? I need to install it with TPG...

  Hope will understand. ;-)

  Secure boot is integrated in the firmware, not the installation hard disk.

  You can just boot from the installation media and format the hard drive.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Y at - it a recovery disk, we can purchase for the X220T for UEFI mode?

  As my topic asks,

  Y at - it a recovery disk, we can purchase for the X220T for UEFI mode?

  Given that normal disks only works for legacy mode (btw, he correctly aligns the recovery with the SSD partition?).

  Your comments are very much appreciated!

  There is no recovery for X 220 UEFI disk (or any system of Lenovo currently-shipping).

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• Network of HP Pavilion G6-2244NR, usb, wireless problems after downgrade to Windows 7

  HP Pavilion G6-2244NR network problems.  Okay, so I have a G6-2244NR I had to downgrade to Windows 7 Pro 64 (SP1), due to software compatibility issues.  Install was initially conducted on UEFI, GPT, wiped 8 and started from scratch with Legacy support MBR.  Installation went perfectly well.  However, I start in 7 and I get the network icon showing a red X.  I then go into Manager and note that there is no network listed devices.  Instead, I have 8 devices listed under "Other devices" with yellow exclamations by each of them.  This includes the Bluetooth controller, the network, a PCI device controller, Ethernet controller, SM Bus controller, two USB controllers and an "unknown device".  Bluetooth ID is ven_1814 & dev 3298, Ethernet ID PCI\VEN_10EC & DEV_8136 and so on.  I downloaded the drivers on the wazoo.  I think that I have updated the chipset but know not so straight updates chipset (catalyst 12.6).  Still no luck.  Whenever I have try and install what I think are good drivers I get the error "device works not ' on the LAN card.  Can anyone help?

  A Wi - Fi connection

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-111782-1&mode=4&IDX=1

  Ethernet

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• HP Pavilion 15 L0E38EA #ABU: video problem returned to windows 7 now graphics will not work

  Hi I downloaded the graphics driver on the hp support web site and still no joy the graphics card is in charge of driver default microsoft any time I install the catelist it will still save isn't a pure windows 7 install 64-bit service pack 1 my graphics are so chunky even when I'm going to hp support site doesn't let me download the driver I have download further help please

  Hey @soul864,

  I'll do my absolute best to help you with a resolution. Below, you will find that I have provided some troubleshooting steps to help with the graphics driver does not properly.

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to uninstall the current display driver? If this isn't the case, please try to:

  • Press (Windows key + X)
  • Click on Device Manager.
  • Expand display adapter.
  • Right-click on the video driver
  • Select Uninstall.
  • Once this done, reboot the laptop twice and check if the problem persists.

  You receive error messages?

  Did you get your Windows updates?

  Did you run the HP Support Assistant for the software and the drivers updated?

  You happen to have any antivirus software running, firewall, etc.?

  Problems in Mode safe?

  Have you tried to update the drivers in clean bootmode?

  Can you please provide me with a screenshot:

  • The section of the graphics card in Device Manager
  • The tab in the properties of the driver
  • The State of the device under the general tab

  I took a quick glance to your HP Pavilion Notebook - 15-p264na Software and Driver Downloads page and I see that there are 3 different versions of AMD driver at your disposal. That is you get to try?

  AMD graphics in high definition (HD) #1 driver

  Out the: 3 Sep 2014

  Updated: 13 August 2015

  Version 13.352.1004.0

  File name: sp68613.exe

  AMD graphics in high definition (HD) #2 driver

  Out the: October 17, 2014

  Updated: 13 August 2015

  Version 13.352.1004.1010 B

  File name: sp69351.exe

  AMD graphics in high definition (HD) #3 driver

  Out the: October 15, 2014

  Updated: 13 August 2015

  Version 13.352.1004.1010

  File name: sp69299.exe

  Have you tried to do a system restore to the time where everything worked properly?

  If this answer was helpful, please let me know by clicking on the button accept as a Solution . This will help others who have the same problem a solution also. If you want to show your appreciation and say thank you, please click on the Thumbs Up.

  If you need assistance, I would be more than happy to continue to help you!

  Welcome to the HP support community!
  Thanks for joining in!

• HP Pavilion 15-p060sr: sleep/stop problems

  Hello everyone.for last 4 or 5 months my HP Pavilion 15-p060 a face sleep and shut down problems. After heating to some extend, when I try to shut down my pc, the screen turns off but fan is still running inside and led is open. Moreover, when I close the lid and open after, again the same problem pc not wakes up to the top of the standby mode sometimes and I can't get into the bios screen either when I turn it on.

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the latest driver IMEI directly from Intel on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Pavilion 15-N240ee: Wifi driver problem

  Hello

  When I close the lib (plugged), wifi turned off and my download stops

  all power saving settings is disable and lib is the 'status quo' (connected)

  I think that this problem is a bug in the driver

  Please help me

  Hi @MA88,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - n240ee and issues with the power settings when the lid is closed. Here is a linkthat shows you how to activate the away mode. It allows your computer to continue tasks, such as recording TV shows or sharing of videos and music, even if you're away from the computer. Specifically, when the computer is in Away mode.

  Please let me know how it goes.
  
  Thank you.

• Sleep mode problem

  I have a problem with my mode 'sleep' on my Pavilion laptop 15-n050eb. This takes place since I installed windows 8.1

  When I manually put the pc to sleep I get a screen black still makes the noise but it won't wake up.

  When he falls asleep himself, it's like he stops then when I wake up it upwards (only possible with button / stop) all programs are closed and it takes a lot of time.

  I tried the bios update and drivers and searching online for answers, but they do not seem to solve the problem.

  Hello @Tilia,

  I read your post on how your laptop encounters a problem with wake up from sleep mode, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your settings to effectively use power management "sleep mode" on your system.

  In addition, you can also restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning