Want 4500 sleep mode problem

Similar Questions

• Sleep mode problem

  I have a problem with my mode 'sleep' on my Pavilion laptop 15-n050eb. This takes place since I installed windows 8.1

  When I manually put the pc to sleep I get a screen black still makes the noise but it won't wake up.

  When he falls asleep himself, it's like he stops then when I wake up it upwards (only possible with button / stop) all programs are closed and it takes a lot of time.

  I tried the bios update and drivers and searching online for answers, but they do not seem to solve the problem.

  Hello @Tilia,

  I read your post on how your laptop encounters a problem with wake up from sleep mode, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend that you follow the steps described in this document on the sleep and Hibernate in Windows 8 Troubleshooting, issues. This should help to configure your settings to effectively use power management "sleep mode" on your system.

  In addition, you can also restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Pavilion g6t-2000 black screen & Sleep Mode problem

  Features of the laptop:
  Name: HP Pavilion g6t-2000 CTO Notebook

  CPU: Intel I3 - 2370 m 2.4 GHz, Intel HD 3000

  GPU: AMD Radeon HD m 7670

  OS: Windows 7 64-bit

  So over the past two weeks, I have been having a problem with my laptop after installation of an update to the beta with my GPU driver. Whenever I put my computer to sleep mode and turn on I get a black screen. The computer is turned on and set to lock the screen, so if I typed my password, it'll make the connection noise. Also, if I look at the right angle, I see a very dimmed screen which is there before I moved it in mode 'sleep'. Strangely when I put the laptop in hibernate mode and turn back on the screen is fine.

  Things I've tired:

  • Removed the beta driver and the GPU of HP drivers installed via the HP website
  • Update BIOS f.25 (latest driver)
  • Changed the power of options such as checking to see if hybrid sleep is turned off
  • Check the BIOS, it is very little options and none has to do with my problems. Only thing I can see on BIOS is to change the boot priority and enable and disable the little features like "fan always on / off", etc.
  • Running sfc/scannow

  On a side note, my laptop has been dropped about a week BEFORE the update to the beta GPU on a foot of my bed. "Sleep" mode was not affected by what I know. I was also reading autour on a power inverter and there may be possible that it has been damaged and if you think it is maybe it how can I test it? Thank you.

  I finally got the time to do a restore on my HP Pavilion laptop factory g6t-2000 settings and after doing a test with the AMD drivers, I discovered that drivers AMD were the problem holding my laptop to wake up full-screen mode 'sleep'. Thank you very much for your help AxshunJaxun.

  I recommend to not install the AMD drivers and once you do and that you do not have a restore point the only solution is a factory restore settings.

• M125rnw: HP M125rnw sleep mode problem

  Hello

  Sorry for my English.

  I recently bought a MFP HP LaserJet Pro M125rnw.

  I installed the printer using the ethernet connection.

  I can't solve the problem with the standby printer.

  After a long stay in the mode 'sleep', the printer refused to print:

  1. I can't print from a PC with Windows 7
  2. I can't print from a PC with Ubuntu 14.10
  3. I can print reports using the WEB interface
  4. Turning to the wide on/off the printer solves the problem for a few hours

  Is this a problem with the printer hardware?

  When he goes to sleep, go to the menu of the printer and see if you can push the buttons to get the "sleep mode".  If you can, then the issue is probably with the driver you are using.  If you can't wake up the printer with the button, then you have a hardware problem and the trainer is probably defective.

• Satellite Pro A300 Wireless resumed after sleep mode problem

  OK, so I have this little 'itch' which becomes little boring sometimes. When I take my computer in sleep mode, it takes a good 30-40 seconds my Wi - Fi is reactivated. I mean, that's when my computer wakes from sleep mode and I'm in my browser, I get an internet connection for a good 30-40 seconds. I was wondering if there is some setting I've accidentally changed which makes my laptop to do this? Because I remember my laptop no this when I got it.

  Hey,.

  I agree with the user above. You should try the update the WLAN driver. Perhaps the current driver isn't working properly so an update should help you get rid of it. More recent and pre-tested WLAN driver that you can download on the official Portal of Toshiba WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  What operating system you are using?
  On Vista and Windows 7, you can disable in the settings of the WLAN energy saving feature Windows power management.

  Check this box!

• 4540 proBook s Sleep Mode problem Windows OS 8.1

  Good evening
  
  I have some problems with my Probook s 4540 in Windows 8 (the problem only occurs in Windows 7) during my sleep, he wakes up with a black-Sault llaptop screen caps lock light work lights are all normal, it's just the screen becomes black.
  I have switchable graphics:
  1 Intel HD Graphics 4000
  2 AMD Radeon HD 7650 M

  I don't know what to say I have a 64 bit OS I downloaded the drivers from the official site of HP and I have also tried donwnloading drivers in official sites AMD and Intel. I don't think that I have problems with graphics.
  And sometimes, when my screen stays off for a long time, it displays a warning in the task bar that the AMD driver is not resonding for more information please feel free to ask.
  
  After reading this, I want to thank you for you time I really appreciate it.
  
  Here is the proof that my drivers are ok:

  

  OK, the sleep problem is fixed now repair it just didn't download the drivers from offical HP Driver download page, update your drivers in Device Manager (restart your pc if you having any difficulties updating).
  
  If you have already downloaded the drivers try to use system restore or install a new copy of windows.

• Help! Iconia A200 sleep mode problem

  My a200 iconia don't wake up once it is in mode 'sleep' from updating the system a few days ago. I have to plug charger and time keep the button twice to restart. I tried to reset the data, but it does not solve the problem. Can anyone help?

  try using SoftLocker. It is the only solution that I found.

• 'Sleep' mode problems and keyboard

  I have an intermittent problem when I SLEEP my Acer laptop - sometimes to wake up the keyboard does not work.  There is no echo of nature - nothing.  The mouse works fine.  So I restart and all is well.

  I installed Vista Service Pack 2 and the recent updates through KB973917.

  Any suggestions?

  Thank you

  Twila

  Hello
   
  If the appliance breaks down or is no longer works correctly after resume you a Windows Vista mode computer standby or Hibernate, then the best way to solve this problem is to get the latest Windows Vista service pack. If there is a reason why you are unable to install the latest Windows Vista service pack, the best thing is to get the hotfix that is mentioned in this article: http://support.microsoft.com/kb/929734
   
  As you have already installed service pack 2, you can try to install the patch and if the fix is not to settle, try to download the Microsoft fix it and install it.
   
  If the fix is not to settle, try the manual steps mentioned under fix it myself.
   
  NOTE: Before you run the manual steps, back up the registry.
  How to back up and restore the registry: http://support.microsoft.com/kb/322756

  If the problem persists, you can uninstall the updates that you have installed or run system restore, see this link for more information: http://support.microsoft.com/kb/948537
   
  Post back with the results, so that we can help you further.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Sleep Mode problems

  Whenever I put the computer on the mode 'sleep', it also puts my monitor on the mode "Eve". When I come back and shake the mouse to wake from sleep the monitor will appear for a little bit and then it happens mode 'sleep' and the only way to have access to the state machine is turn it off completely and turn it back on. Is there a way to fix this?

  Hello

  Microsoft has released the PATCH download and test the question.

  Follow this

  Click on start Orb > type cmd in the search box > right-click on cmd in the above results >

  Click on run as administrator - at the command prompt, type powercfg - devicequery (awakening of any key) > press ENTER.

  It tells you what devices can cause problems with the mode 'sleep'

  Also, update all device drivers, including the chipset, the mouse driver and the driver of the display card.

  Please run Windows Update and keep updated the system to date.

  In addition, if there is no security (anti-virus, anti-spyware) software installed,

  Temporary disable or deactivate them to check the result.

  If the problem persists

  You can also perform clean boot tests

  How to perform the clean boot:

  1. click on start, type MSCONFIG in the search bar and press ENTER to start the System Configuration utility.

  If the "User Account Control" window appears, please click on continue.

  2. click on the Services tab, check "Hide all Microsoft Services" and click on disable all (if it's not gray).

  3. click on the Startup tab, click Disable all, and then click OK.

  4 restart the computer and test the issue.

  ==> Boot minimum is a troubleshooting step.

  If some programs have been disabled during troubleshooting,

  We can allow them later. If it appears utility system configuration,

  Check the box "don't show me this message again" and then click OK

  It may be useful

  Nikhil

• WANT 4500 general printing problem

  My desire to 4500 guard folding paper while printing, almost every page comes out with two brands creased on the top edge of the document.  It corresponds to two small white rollers inside the printer.  More or less, a person on ten pages comes out OK. Very often, the paper hangs completely and I have to open the printer to get out. In addition, it seems that the printer takes paper only when the tray is fully or nearly fully charged. I don't see what I'm doing wrong. I am quite satisfied with his printer!

  Hi Kipepeo,

  Welcome to the HP Support forums.  I see that when you print using your printer 4500 want that paper when you print the creases.

  "I have included the document that a Message appears on the control panel and the all-in-one ' Out of paper ' captures no paperproblems.  Please follow the steps described in this document.  It has a section that will guide you through how to check and clean the paper feed rollers.

• Want 'Real' Sleep Mode to blackBerry Smartphones back!

  I read about 30 posts on this topic and person not seems to answer that question on the recently revised change change "standby key button / mute.  I don't no case my 9700, so a TRUE sleep button is very useful.  Some positions indicate that the lock button (left button of the upper part of the appliance) keys is the same as the day before.  IT IS NOT THE SAME THING!  Keyboard lock has Nothing to do with placing the phone in a lower power state.  With that, does anyone know if it is a button or a process to put the phone in real (other than by phone Holster) standby mode?

  Thanks in advance for all messages that are relevant and useful

  Where do you find the idea that 'pending' was less "power status" the keyboard lock?  Indeed, they are basically the same thing just moved to another button and a new wording.

  There is no button or process to bring back "sleep" on a 9700 without degradation of the OS to a previous version.

• HP Pavilion dv6809us [portable] sleep mode problem

  Product name: HP Pavilion dv6809us Entertainment notebook PC

  Operating system: Windows Vista editions Home Premium

  Problem: When I "close cover" or "click on the sleep button" to leave the sysem for enter in standby, the monitor is turned off quickly, but the system is still running. After a while, the system reboots automatically. Because the screen is off, I see nothing happened there.

  Please suggest.

  Hi Sai_Krishna

  When your computer turns on, you're always running of programs or are they shutdown?

  Certainly, sounds like a problem of standby or Hibernate, see the link below for some more information and some troubleshooting steps.

  http://support.HP.com/us-en/document/c02076993

  Thank you

• monitor stays on sleep mode for windows vista

  Windows vista-processor is turned on but monitor does not wake up from sleep mode-continues to say goes into sleep mode.  by pressing the icon Moon, esc or space bar does not work.  help, please.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• screen standby and sleep mode

  When the screen saver comes on, the back ground stays on too, it's just background or a Web page.  Also when I want to sleep, the screen will turn black, but the computer will not sleep.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Remove and reinsert the battery to reboot the computer from sleep mode

  When the computer goes into mode "sleep" due to inactivity, it cannot be started again until I completely remove and reinsert the battery. It is an Acer laptop with Windows 7 OS

  Hello

  References to Vista also apply to Windows 7.

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.