HP Pavilion g4-2149se memory test failed

Similar Questions

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K

• Test at startup "memory Test: FAILED.

  Hello

  HP ENVY Notebook PC m6

  64-bit Windows 8

  8 GB of RAM (2 x 4 GB)

  I got a lot of blue screen errors so I made a diagnosis of start-up perform F2 at startup of the system and that's what I found:

  Test at startup

  Processor Check: PAST

  Memory test: FAILED

  Starting test: FAILED

  Failure ID: U08K9R-6AE6S3-XD7X1F - 407 X 03

  Product: C2C18EA #ABU
  Memory module

  Any suggestions?

  Thanks in advance.

  Hello Rahat,

  Start diagnostics is buit to check if there is hardware with computer problems.  He has failed the test of memory which means that one of the memory on the computer module has failed and must be replaced.

  If the computer is under warranty, I suggest you come in contact with HP Service Center and solve this problem.

  Concerning

  MathewT

• Pavillion G6-1240sa: G6-1240sa Pavillion: BSOD repetition and memory test failed

  Hello

  I get errors blue screen on my G6-1240sa laptop running Windows 7 (64-bit).

  SYSTEM_SERVICE_EXCEPTION

  Technical information:

  STOP: 0X0000003B (0XFFFFF80002F2D15F, 0XFFFFF880078CCB50, 0X00000000C0000005, 0 X 0000000000000000)

  I made Diagnostics, accessed through the F2 key on startup and make me

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MQ-MFPV4K-405503

  Product ID: A3S574EA #ABU

  Memory module

  I removed the laptop 2 GB module, a 4 GB module is also present. After re - run the test, I got:

  Memory test: failed

  Failure ID: 9BU2JX-5TA7MR-MFPV4K - 405M 03

  Can someone help me with this?

  Thank you

  Hello

  Remove a RAM and run a test at the same time, if the test fails on both the RAM. You will need to replace both. If this is not the case, replace the one that fails the tests of RAM.

• G6 Pavilion: Pavilion G6 Memory Test failed

  Memory test failure 90fd7h-5nr82m-mfgh5f-402803

  Product ID: LW350ua #aba

  Any ideas on how to fix?

  Thank you!

  Hello
  
  Replace the memory module.
  
  Contact HP with the failure code. They will do it for free if you are under warranty.
  
  If not, get a 4 GB key with exactly the same configuration, speed, etc. as shown in the manual. Crucial, Kingston are good brands that have their own online scanner, which contains the list guaranteed compatible sticks.
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c02829479
  
  Concerning
  
  Visruth

• Memory test failed w / Kingston 4 GB

  I have a HP G42 - 461LA Notebook PC, and I added a 4 GB Kingston Ram memory (KVR1333D3S9 / 4g). I started to notice my laptop has been slow and has decided to conduct a Test of memory of the HP Diagnostic tools (F2).

  It fails with this failure ID: U3439W-5HW70M-XD002K-40HU03

  When I removed the memory stick and tried again he passed successfully.

  The strange thing is that when it is installed it is recognized and it seems like it should work, but it is slow at the opening in a few tabs in the browser (most audio glitches), and the test fails.

  Hello

  ID failure indicates that there is a problem with a memory, and must be replaced. This should be the cause of the issue of the slow-running also.

  

  I suppose that there are two locations of memory for your computer.

  You can try a memory at once and run the test or check the performance of the computer with a memory. Then, you will be able to isolate the faulty memory.

  Sometimes it might be also the memory slot... so try a memory at a time in each slot in interchanging the. That will help you know if there is a problem with one of the slot.

  You can refer to this link...

  The upgrade (RAM RAM)

  I hope this helps...

• Memory test failed

  Hello

  I use a laptop HP 1000. The default ram was 2GB but I added another 4 GB module in it. My laptop works quite normal, but it gives me the blue screen of death by practicing a particular game (League of Legends). I have no other than error, and it works fine. I decided to test my memory to the HP support (by pressing F2). I got the error of test with some ID of product failure.

  So I ran Memtest86, there was no error proves Memtest86 in 1 pass. So I want to know that why HP test failed and Memtest86 gave me no errors.

  OPERATING SYSTEM: WINDOWS 7 64-BIT

  Thank you

  Ahmad Salmat

  Concerning
  Ahmad Salmat

  I would say that confirms that the RAM module is defective.  This test is performed on the single 4 GB stick or the also installed 2GB stick?  If it was with the one 4 GB stick, then I would say that it is more than enough evidence to justify the Exchange store.  There is not much I can do from this end with a third of RAM.  You will need to contact the point of original purchase for an Exchange and explain tests memory failed (Memtest86 and HP).

  Let me know what happens.

• Pavilion G6-1203ey: HDD Test FAILED, but can still start Windows

  Hello

  I have laptop HP Pavilion G6-1203ey. After installing Windows (7 ultimate, 64-bit) and some drivers on this topic and after several reboots, it hung at the Windows logo and I had to power off with the power button / stop. Then after having turned it on, it gave me the opportunity to fix problems that impede it to start, there let him to restore the computer to a previous restore point and after a reboot, the windows worked again. After that, I decided to do a check of the hard drive just in case.

  The hard drive self test ended up with a message: disk full 1 (305). Then, I installed an environment to help HP Unified Extensible Firmware Interface (UEFI) and made the hard drive from there. I chose the full test options, but it ended quite quickly (in about 1 minute), with the following result:

  Test Drive: 1

  HDD SMART Check: PAST

  Hard drive short DST: FAILURE

  FAILURE ID: PTTU22-5T774L-MFPV4K - 60S 003

  PRODUCT ID: A5Q15EA #B1R

  Hard drive 1

  __________________________________________

  Test drive: FAILURE

  A little more information:

  The former owner told me that the original HARD drive was defective, reason for which he replaced with this last year. He said that other than that, no problems with the laptop. Windows works right now and this disc is quite new, so I expect no problems with it, but the results of the tests mentioned above seem to be disturbing. Is there a reason to worry?

  Thank you

  Hi Alnuir,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post and looked into the ID of failure that you have published on the test runs DST failed. This error indicates a hard disk failure meaning that if it failed there could soon. If everything works I would be given for the backup of your data on a regular basis, just to be sure. You may have a local tech take a look at the hard drive to see how it is at the complete failure.

  Thank you

• Pavilion g series: HDD test failed

  My laptop started acting funny after an automatic update Windows 10. Ran misdiagnosis and get

  Failure ID 60AF0J-64B84Q-MFGK0J-60WE03, A6Y42UA #ABA product ID.

  I could not find the error code in the forum, no one knows what it is? Thank you!

  Error codes are generated only by the diagnostic program, so no 2 are the same explains why you do not. This means that the hard drive needs to be replaced.

• test memory Windows failed

  memory test failed for windows

  Then?

  The sticks of memory have failed or you have another hardware problem with your motherboard

• Memory test failure...

  HP Pavilion g6-1306ea on Win7

  I run the development of System Test and on the memory Test failed with the following text:

  Failure ID: 0LMPPR-66Q75F-MFPX0J-60R503

  Product ID: B1W42EA #ABU

  Can someone help me take this news?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP (with the error code) and make arrangements for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Hard drive test failed, not found boot device

  I have a Pavilion dv7 1245dx with Windows Vista 64 bit bought 2009 at Best Buy.  He slid the arm of the couch on a carpet in stop down.  Next day started ok, entered into yahoo, facebook, then type of frozen.  Finally, don't do anything, turn off manually down, started upward. Black screen, "No. Bootable Device - Insert Boot disk and press any key". It will accept only the recovery disks that I made after the purchase. Starting test ok, ok, hard drive memory test failed 'Boot Drive not found'.  If it helps, caps lock is flashing.  I saw something in a forum on the reset or reinstall the hard drive but no explanantion how.  Can you help me?  And can you give me a ballpark figure on a new hard drive or better to buy a new laptop?  Laid off in Michigan, hoping to be able to get the unit up and running without having to consider.  Thank you very much for your help!

  Hello:

  Here is the link to the service manual for your laptop.

  Can be found in Chapter 4, procedures for removal and replacement of hard disk.

  http://h10032.www1.HP.com/CTG/manual/c01918142.PDF

  If removing and reinstalling the drive does not resolve the problem, then the hard drive is dead.

  I don't know what that means though the flashing light of caps.  This could be something more serious.

  A new hard drive will cost about $57.00.

  I hope the recovery discs, you did work on it as well. They should but no guarantee.

  http://www.Newegg.com/product/product.aspx?item=N82E16822148532

• Starting test FAILED - HP ENVY 1191-NR

  Hey guys/girls,

  New to the forum - need some tech support.  I have a HP ENVY3D 1191-NR running Windows 7.  He recently began closing before you start completely.  I ran a Test at startup and for the following results:

  Memory test: FAILED

  FAILURE ID: QE40XL-5GE6G4-XD0141-400103

  PRODUCT ID: YL748UA #ABA

  Memory module

  Starting test: FAILED

  I wonder if that means the RAM of the computer has gone wrong and I need to replace, or else... ?

  Thanks in advance to all.

  Hello:

  Yes, that could indicate a possible memory module failure.

  What I would do is unplug the PC and remove the battery.

  If the laptop has two memory modules, remove one of them and plug the power adapter.

  See if the PC starts and works normally.

  If so, unplug the adapter, remove the other memory module, put in the first one you took, connect the a/c adapter and see what's the result.

  If the PC does not start, you have isolated the bad chip and you can just buy a new one with the same characteristics.

  If the PC is still under warranty, contact HP for a replacement.

• I have a Pavilion dv6. The test of hard drive reads: SMART Long DST passed, short DST passed, and failed.

  I have a HP Pavilion DV6 and it will DISPLAY, allow me to connect, and then reading welcome with the busy symbol, then the screen goes black.  My pointer always recognizes the touchpad and moves accordingly.  I've performed memory tests and received the following errors

  Failure ID: PU56W2-5KL62G-XD0141-61F103

  Product ID: LK469UA #ABA

  Hard drive 1

  Test drive: FAILURE

  It comes after the memory test, said this lower slot 2 failed.  I don't know what happened, but I want to be sure, I replace the components just before that I'm going to spend a lot of $.  All the tips are greatly appreciated.

  The hard drive LK469UA ID is used in the HP PAVILION DV6-3236NR NB PC US

  Assuming this DV6 is an American product, it's DV6-3236NR specifications

  There's an alert about the products of hardware for the DV6-3236NR, for the SATA (Serial ATA) hard drive controller here.

  "... Serial - ATA (SATA) ports in chipsets can degrade over time, that may affect the performance or functionality of the SATA-related devices such as disks, hard and DVD players. »

  The problem with models sold by little close before March 2011, including "fourth to sixth digit of the serial number are digitally"107"or less" effects AND where ' is the name of the chipset in the Device Manager... ".  "Intel (R) 6 series/C200 Series Chipset Family.    There are other caveats.  Not all of these DV6 have been affected.  HP and can still have a replacement

  "If you have an HP computer with the affected chipset, HP recommends that you contact HP support for service solution-join and receive the update free of charge for you."

  See the link above for more details.  We will this rule first and then move on.

• Pavilion dv6t-6100: DST tests, running-in, System Tune Up and hard drive failed - which means ID failure?

  The above tests failed, and passed the SMART tests, memory and battery.  I had problems with a program so I rean these diagnoses.  Failure ID is 9LGDWX-5M984B-MFH15G-60SN03.  What is the code of failure?  If I need a new hard drive, how can I find out what you get it?

  Hello

  The error code 24 characters is a disk failure short self-test and would indicate that hard is defective and must be replaced.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 70 of your & Maintenance Guide.

  Once this is done, simply use your recovery media to reinstall the operating system on the new drive - this is described in the document of HP here.

  Kind regards

  DP - K