HP Pavilion p6 2330: AMD 760 k and HP Pavilion p6 2330/fan compatibility and the recommendation

Similar Questions

• Evaluate my model design AND the recommendation on LVOOP

  Hi y ' All!

  So today I would like to evaluate you my point of view on the producer consumer model pattern design (obtained after combining saw different designs on youtube / OR presentation/forum.)

  

  In so doing, I fell a lot on several video recommending OOP. Application, I'll build using this design model is an interface on screen touch (lots of controls) for a measurement system [OR usb acquisition, generate the signal, pool several analog sensors, sensors of control (sometimes not the same according to the customer), read/write file tdms (can end up being quite large), interact with PLC etc..]

  The current version of the application I'll inherit later (puns intended ) have what can be called a super-mega-gigantic cluster (cluster of clusters containing virtually all data types) happened quite a bit (loop producer and 4 loops of consumers and other places too).

  As an introduction, I used a mini cluster on this model and tried to make a comparison between the classes and groups:

  

  

  Then issue:

  1. I just do it?

  2-why the super cluster is bad? (it's so much easier to bundle - unbundle...)

  3 - What is the difference between the dynamic distribution and accessors? (On most of the tutorials and demos, I saw that they where with dynamic Dispatcher just to read and write to a class method, that I found on the accessors recently)

  4 must be done - must call parent

  5 having so much vi won't have a big impact on the performance of the system?

  6. dynamic load and more specific? (I think I understand one a bit, but any input is welcomed.

  That's all for now!

  Thank you!

  Hi Fabrice,.

  A look at this here's answers to your questions.

  1. you seem mostly right do based on what you told me that you are looking for. It seems that you have a decent knowledge on the architecture.

  2. a cluster containing a large number of items is bad because it takes a lot of memory every time that you use it. You must also transfer around the huge amount of data, which takes more time.

  3 dynamic dispatch is where a child gets automatically selected when its been based on criteria. The accessors are similar to get and set methods. If these two things are totally different.

  4. I don't understand what your question "must replace-must call parent."

  5. have a large VI does not necessarily apply the system performance. What you do in VI that affects it. However, keep in mind that you want to make your code readable by a smaller VI is therefore preferable.

  6 dynamics of just load load a class and more specific takes a parent and transforms a child.

  Let me know if you have other questions about this.

• Pavilion p6-2330: hard drive for the error message failure

  I need to know what to do in response to: "short hard drive DST-Failed", failure ID: 60E3KV - 0007Q 9 - WPTXOK - 60QD03 on a desktop pavilion p6-2330.

  When the computer is turned on, it presents a loop; try to solve the problem, but unable to do so.

  The memory test is 'spent '.

  SMART hard disk check is 'passed '.

  Thank you.

  Hello.

  This 24 character of error codes when generated from the HARD drive test indicates a Smart failure or disk Self Test - in both cases, this means that the drive is defective and must be replaced.

  You always have access to the data stored on the disk? If you do, then save as much information as possible and look for a replacement drive. If the product is still under warranty, you can contact support, but in case you have no guarantee and you would like a guide to replacing the hard drive yourself – please let me know.

  I hope this helps and good luck!

• Pavilion n201ax: upgrading the GPU, the CPU and the RAM of my laptop n201ax

  Maybe it's a very long post, but please answer because I really need answers to each of these questions and I really want to upgrade my laptop to the best configuration, if I CAN.

  Let me make this clear first.

  * In the next contained the words 'this portable' always refers to Hp Pavilion 15-n201ax *.
  Good then everything first I read somewhere that the maximum Ram of this laptop can be expanded up to 16 GB, but i came up with this link here-

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/I-would-like-to-upgrade-memory-of-my-lap...

  And then I came to know that it can only be upgraded to 12 GB page chapter 1 Description this Guide - #2

  http://h10032.www1.HP.com/CTG/manual/c04438537.PDF

  First of all I would like to ask, is that,

  1. can I buy a RAM of any brand but the same 1600 mhz clock speed ofc IE?, then can I go to the GSkill 1600 Mhz DDR3 4 GB of ram?

  2. the size matter for respective locations? or I can install the 8 GB and 4 GB of ram in any other slots?

  So this was all about the RAM

  But I need to know if I can change the discrete GPU and the APU of this laptop

  3 and if yes - which are compatible mobile GPU that I can install by removing the previous one ie AMD 8600 M (for example graphics R9, R7 and R5 for laptop)

  4 and who are the compatible APU I can install by removing the APU previous IE AMD APU A10 - 4655 M (for example the AMD FX APU for laptops)

  5. If I can upgrade the GPU and APU both please tell makes compatibility issues? as only a specific GPU can work with a specific APU IE as in this laptop AMD APU A10 - 4655M + AMD 8600 M GPU.

  Please help me, please.

  Thanks in advance.

  Pavilion 15-n201ax?

  We may need to refer to the owner's manual here:

  Your repair manuals

  Officially, it supports only 12 concerts. Your model has a single module of 8 GB if you have an open slot. Unofficially, users here can have reported that add another 8 GB for a total of 16 concerts will work fine. It's something you take the risk of making but it is not official.

  The part numbers for the appropriate memory are listed on page 42. You must DDR3L-1600 SO-DIMM.

  If you want to go formal, the 4 GB module is: 691740-001

  Is this on amazon.com:

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_1?ie=UTF8&QID=1437948185&SR=8-1&keywords=691740-001

  You just leave the concert 8 where it is and add the new memory into the open slot.

  On your laptop model, the GPU/APU is soldered to the motherboard. In order to make any upgrade, you will need to buy a new motherboard. You have an idea together wrong GPU/APU can be removed and replaced and this is incorrect. The term APU refers to a processor that has integrated video, so the whole issue on the compatibility between the GPU and APU just missing the mark. On some systems, the GPU/APU is socketed and can be replaced which is used to replace/upgrade the processor and the video function but as stated above, on your this involves pulling and replacing the entire motherboard.

  There is available a little better/graphics processor using AMD A10 - 5745M 8670 M (2.9 GHz/2.1 GHz, 2 GB L2, 1333 MHz DDR3L Quad 25W) for use with Standard Windows. The part of the motherboard is 734824-501

  HP does not store the Council, but I found this line:

  http://www.discounteddealz.com/product.asp?Itemid=327740&gclid=CO78y6rn-cYCFQmCaQodOP0GLQ

  Never heard of this seller and can not be a guarantor, but the price is very reasonable for this Council. I was expecting to be a little more makes me wonder about this seller a little. I would advise to keep what you have. He is very strong for AMD and the upgrade to the Commission on the A10-5745 will result in only a very small increase in performance to a very high cost in money and efforts.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• My AMD driver fails and recovers almost daily. Is any way to stop this?

  My laptop is a HP Pavilion laptop g7-2224nr and my driver is the default, an AMD Radeon HD 7420 G Discrete-Class graphics card.

  There is no blue screen, but when I Watch youtube videos, the video will stop randomly and it will say "the amd driver disconnected and reconnected with success."

  You guys have any suggestions to help me?

  Edit: I forgot to add, it's a windows 8.1.

  Hi CressieCake,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with the AMD Radeon card. I suggest you reinstall the driver in case he got damaged. This is the High-Definition Audio Driver AMD give that a try and let me know how it goes.

  Thank you

• Speed max and the capacity of RAM of Pavilion dv6

  Hi guys,.

  I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

  What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

  I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

  HP Pavilion dv6 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i3 - 2330 M CPU @ 2.20 GHz

  RAM:

  Slot 1: 2 GB SODIMM Hynix 1333 MHz

  Slolt 2: 4 GB SODIMM Samsung 1333 MHz

  Radeon (TM) HD 6490 M

  Motherboard: 17F9 10.5 A

  BIOS: F.1B

  Sincere greetings

  Justin

  You are the very welcome, Justin.

  Yes, that's correct. 2 x 8 GB PC3-10600 memory.

  Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

  For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

  I don't think that there is no outside but except DDR5 memory in video cards.

  But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

  Best regards

  Paul

• Trying to find the plug and the power upgrade in a HP Pavilion Elite m9177c

  First time posting here so I hope I chose the right place for my question.

  I currently have a HP Pavilion Elite m9177c as a tempoarily computer until I can build my own. He was works fine but I found that this computer for all its good specs has only a 8500GT no idea why parent obtained through costco and gave it to use when my dell power supply gone bad and must be replaced.

  So I chose an EVGA 9800 GT

  http://www.Newegg.com/product/product.aspx?item=N82E16814130534

  But I discovered that my HP probably has just one power 350 watts (checked online still need to open the case to be exact, before buying it) while the card requires 400 watts accoring to the details.

  I tried to call HP support for dimensions and wattage supply type, but it was a chore. One guy said all the power supplies have the same size (maybe he meant the hp ones for my computer, but he never said so), another guy told me that without a guarantee that he could not even tell me the power and the third Lady said my dimensions are 9.6 inches by 9.6 inches or 24 centimeters. (do not know if she was trying to give me a microatx measure and I misunderstood the 3 as a 9 or what.) And the first guy claims it was a micro-ATX Power Supply, while the other comes from say atx.

  So after some googling I found these links

  1. http://www.censuspc.com/HP-Hewlett-Packard-5188-2859-350-Watt-SIRAH-350-Replacement-Desktop-PC-Power... - this seems to be what I have but he calls it the ATX 12v version

  2.http://www.911forpcs.com/5188-2859.html - this seems to be something I could go too, but I don't know if I might be better off with a full-on name brand like Corsair.

  3.http://support.hp.com/us-en/document/c01736200 - this is a different model of Pavilion Elite but so far it looks like mine how. The same video, for some reason any does not exist on the page for my model.

  I found two feeds that seem to fit the same dimensions as in link #1, but a larger 0.1 inch on a measure, but I hope that my hp case allows a slight wiggleroom.

  1. http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028 - a 600 watt Corsair

  2. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153151 - a 530 Watt Thermaltake

  Was just curious to know if anyone has better info on what exactly is in my case, and what is the best food to buy. I still intend opening the case before buying but just moved and such and call help tech kind of wore out me. I wanted to anyway just say that the computer has been much less the thing of the graphics card. Thank you

  Hello

  Type HP power supply (PSU) dimensions for cabinets mid-turn are: 5.9 by 3.4 by 5.5 inches.  If you get a power supply that is longer you might have problems of space between the PSU and the optical drives.  In addition, there are a stabilizing latch that cannot secure the PSU of stirring. This is a minor issue you should aware of your PC should be buy a power supply which is longer than the typical POWER HP block.

  The Corsair and both Thermaltake excellent food.  I would give the go-ahead for the CX600 Corsair ($50 after rebate) based on the cost, the total power available and the efficiency rating.

  This power supply is typical for your PC based on the part number indicated by HP PartSurfer.

• New HP Pavilion will not go beyond the screen with the "HP" Logo and the "circle of points."

  I recently bought a computer HP Pavilion (HP Pavilion 10:10 - e010nr). It was my first experience with Windows 9.1, but everything seemed to go OK. Then, yesterday when I had to retype my password, the computer began to run very slowly and then seemed to lock-up; It would not do anthing. I held onto the "button until the computer turns off and then restarted. When it restarted, it didn't go beyond the initial screen that shows "HP" in a blue circle and the small circle of the small white watch points there work but nothing ever happens. (I tried this many times, but the same thing happens. If anyone can help me to go beyond this opening "HP" screen, I would really appreciate it.

  Hi Referee06. I understand that your computer does not load past the HP logo at startup. To resolve this problem, proceed to the section "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" in this document: computer does not (Windows 8)
  
  Let me know how it turns out.

• HP Pavilion X 2 11-h003sa keyboard and the start button

  I have a Pavilion X 2 11 - h003sa running Wwindows 8.1. It's less than a week and without any changes to the system (no software update or driver installs) after a restart, the Start button stopped working and when I try to dock with the keyboard, the start on the tablet button remains lit (but unfounded) and the keyboard does not work. By that, I mean the key and the trackpad do not react, are not all usb devices, and even the charger shows not only plugged into Windows. The orange charging light lights well.

  Weirdest part is the only thing that works - he always knows when the laptop is closed with the connected keyboard.

  Any suggestion or help here would be appreciated.

  Thank you

  James

  Hello, James.

  Your X 2 is perhaps responsible got stuck on something, he is unable to perform; This problem can be self-correcting after a full stop and normal reboot of your tablet. Since it is not always easy to determine the power state of a Tablet, I suggest you make sure that is turned off by pressing the power button for 10 seconds, then release. wait another 10 seconds then press the Windows Start button. You should not feel any momentary vibration when you press the Windows key. When you are certain that the X 2 is turned off, try to start normally. I hope that your tablet will resume its normal operation, but if not, I suggest you contact your region (UK?) HP support because several interactive steps may be needed to determine the cause & fix for your problem; which can lead to a very lengthy process if attempted by the rear "n" following exchanges of the forum.

  Find your HP contact information & support options by scrolling to the bottom of this page, to this you see "On HP" on the left. Click on "Contact us" just below this to see the choices to your selected region or country...

   

  I hope you come back soon with news that your tablet is running normally. However, we will also try to answer questions if necessary.

   

  Good luck!

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• HP pavilion slimline 400: a problem about the upgrade card chart, power, and a new case

  I have a hp pavilion slimline 400 and I want to upgrade the graphics card of it. However, the food is not enough for my new graphics card. The image is too large for this case. SO I decide to buy a new case and PS! Move all the thing inside the hp pavilion slimline 400 to a new case. But I heard someone say that this kind of PC can match the case that we can buy in the store and the cable of the PIN from those of food on the market do not correspond with the motherboard. CAN I really do that?

  You will still need a case that supports the Μatx layout.  I/O back plate must be modded or replaced to adapt.  Most cases have both Μatx and ATX layout (dead end of pines).  For some time that this question of stitching was done.  These help?

  

• Pavilion g6: I forgot administrators and the power on password for my hp pavilion g6 with windows7. Halt # 801473

  Forgot administrators and the power on password for my hp pavilion g6 with windows7. Halt # 80147381 thank you.

  Hello

  Try: 35825907

• HP 2000 - 2b19WM Notebook PC: AMD graphic Driver fails repeatedly, and the PC often restarts itself...

  I bought this laptop a few months, put it away in a corner and when is it coming out my old laptop broke. I got it at low cost, was handed to nine Windows 8 PC, I've updated to 8.1 in early December. I use this laptop heavily, I watch a lot of videos, and I kept meeting my good old friend, the green of death. I was familiar with it, that the pilot had failed several times on my other laptop as he grew older. However, this error occurs repeatedly. I'll see that I've got the greenscreen, I'll go to my office and opened to the top of the screen with all the drivers listed, click on the display of the maps section and open the graphical part of AMD. I'll click Update driver in the second tab to search for updated drivers. Each time on what he tells me that he has that no update, so I'll be back with the graphical part of AMD, click Update again and, this time, search the drivers already installed on my laptop. Currently, there are 2 AMD drivers available, both the AMD Radeon HD 6310 versions, one starting with a 12 and the other starting with a 13. No matter which version I coose, both only work for a few hours before I have to redo the procees.

  ALSO, sometimes after update the graphics drivers, my laptop with just close and restart. He will sit on page load with the HP logo and the circle with doing the loading circle, but the page with disappear and appear again and do exactly the same thing. On several occasions. Finally, a blue screen appears which says I need to restore my laptop and the previous version. I click on the button to do it, and the screen returns to the page from loading except now, it not there no circle loading, just the HP logo. He's sitting like that for about 20-30 minutes before a blue screen appears stating that the laptop could not restore to the earleir version, and there is a button Advanced Options on the Advanced Options page there is a button that says exit and go from 8.1 to Windows, so I click on that and the computer restarts normally and I can use my laptop again.

  SO I need someone to tell me how to stop the repeated appearance of greenscreen and (hopefully) tell me how to stop my computer to reboot (it did its shenanigan last night, and when I finally got my computer back to the start screen, my Word documents had disappeared completely. I even tried to restore all thatword documents recorded due to the closure forced the document, but nada for me) I'm afraid that I'll lose even more work and time to these problems, and I hope that someone can help me.

  Hi @SabrinaS,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your 2b10wm of 2000 HP Notebook PCs and laptops having problems with restore points. Two graphics drivers that you see listed and you restart the portable computer to uninstall.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a document on assistance with the computer does not start. It gives you instructions step by step when you see the HP Logo screen.

  What happens when you play a DVD?

  What browser do you use? Here is a site that will check if your update.

  Please let me know.

  Thank you.

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.