HP Photosmart 6510 (error - unable to find printer)

Similar Questions

• HP Photosmart 6510 B211a unable to Scan

  I have a HP Photosmart 6510 B211a e-Print wireless printer/scanner, that I use with my desktop version of Mac OS X Lion 10.7.5 (Mac Mini) and, with the help of Parallels Desktop 7 for Mac, I use it with my Windows 7 PC.  I am not able to scan from my HP Photosmart 6510 to my PC and not able to scan from my PC to my HP Photosmart 6510.  Moreover, I am able to scan from my Mac to my HP Photosmart 6510, but unable to scan from my Photosmart 6510 to my Mac.  I want to be able to save scans on my PC (and not only on my Mac) and be able to scan from my HP Photosmart 6510.

  Also, I am able to print from my Mac and PC.  The State of the results of the wireless network Test, "no problem found.  Congratulations on the successful your printer wireless installation. »

  "When I try to scan from the HP Photosmart 6510 as a document in the file, I get the error message"Unsuccessful Scan"and"... the States please make sure that your computer is connected to the printer and try again. "When I try to scan from my PC (from measures taken by scan - scan a document or photo), I get a long error message title 'inaccessible Scanner.  I temporarily turned off my Mac and PC firewall, but I always encountered these errors.

  Recently, I changed my phone LAN Ethernet line.  Before this change, I had no problem (at the beginning, when I bought my Mac Mini and Parallels Desktop 7 for Mac, it was very difficult to get printing and scanning to work).  Now I don't know what else I can do other than HP Photosmart 6510 to uninstall and reinstall.  Before I do, I want to know if there is anything else I can do, and if someone else had a similar situation, especially those who use Parallels Desktop 7.

  Good news!

  I was not contacted Parallels, I found another HP discussion not being able to scan.  Embarrassing, I also realized that I never properly uninstalled my printer/scanner on Windows and Mac.  Firstly, I correctly uninstalled (i.e. completely) the printer on Windows and Mac, I reinstalled the printer for Windows using the floppy disk, found the site to download the latest firmware of HP, software and tools of the diagnostic utility (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=5058336), reinstalled the printer for my Mac, run the tool of diagnosis utlity for printing on Windows (strange that it showed was installed my network printer but gave me an error that it) was not installed, so I clicked 'install'), and finally, I ran the scan on Windows diagnostic utility tool.

  I am now able to print and scan without problems.  Unfortunately, whenever I do a major change (upgrade of Parallels or MAC OS), I must start the process again.  At least now I have the process documented for future use.

  Thank you for your patience and your help.  I am ready to close this discussion as resolved.

• iOS (iPad): error "Unable to find traits named" during the 'standard' generation only

  Hello

  I built an app with happiness on the desktop and the "fast" mode without any issue. However when I Isaiah to compile Standard mode I get the following error will appear:

  Exception in thread "main" java.lang.Error: unable to find named features: spark.components.supportClasses::StyleableTextField

  at adobe.abc.Domain.resolveTypeName(Domain.java:232)

  at adobe.abc.Domain.resolveTypeName(Domain.java:149)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveTypeName (GlobalOptimizer.java:272)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveSlotType (GlobalOptimizer.java:946)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveType (GlobalOptimizer.java:535)

  I think it has something to do with the fact that I have a preloader class with my request. Even if it is not necessary for the iPad itself, this app is cross-platform and is intended to be built as a standard swf for web use, so I would like to keep in there. I had to include the following two paths as records of CFCS in my way to build Actionscript-> library path in the project settings for it even compile in the first place:

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\libs

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\locale\en_US

  So I suspect that they may have something to do with my problem. I use the latest released SDK Flex with Adobe Air Flash Buidler 4.6 3.4.

  I've seen tons of people complaining about this error when it comes to Air Native Extensions (ANE) but I do not write one. Someone has encountered something like that with just a simple app?

  Thank you!

  I solved the problem. I had to include manually in the source path C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\projects\mobilecomponents\src, which is the case of the traits: spark.components.supportClasses life. When I tried with Flash Builder 4.7 or 4.04 FlashDevelop, I didn't have to do so I don't understand the inconsistency here. But at least it compiles.

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• HP psc 2410xi photosmart windows 7 says cannot find print drivers. site Web of HP said it's there. HLP

  According to hp, hp psc 2410xi photosmart website is plug-and-play. Depending on the software of windows 7, it is said that there no printer drivers for hp psc photosmart 2410xi. I can not print!

  Help Neede

  DAV

  The wizard did not work to fix this problem, because the wizard does not list the 2410xi in the window for drivers. The lowest, that it will the number was the 2600. However, go to devices and printers and right click on the printer and click on the button so that the appearance of the computer to solve the problem solved the problem. The computer found the drivers and I can print now. Thought you might like to know

  Dave

• HP photosmart 6510: error on hp photosmart 6510 showing-95 when using scan to email

  My photosmart hp 6510 displays error - 95 when using scan to email. Help!

  Hello @twinec, greetings!

  Thank you for joining the Forums of HP Support! I came across the question you posted, and I want to help you with the best of my knowledge.

  You can try a manual DNS address assignment to fix most of the analysis of the questions by e-mail. Try the steps mentioned below and check:

  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)
  • Save the settings. Restart your modem, router and printer.

  Let me know how it goes! Good luck

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• startup error: unable to find: gmsapns.dll c:\windows\

  Original title: start-up to receive a message that windows can not find: gmsapns.dll c:\windows\

  Need to recover these files

  You might think differently after reading this:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search generates no good reputation hits making the file name even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Rise of Nations Thrones and Patriots - updated "Error", unable to find the Patch

  As the title says, I have installed T & P RoN, and I can't patch for the latest version, which would allow me to play in multiplayer mode. Whenever I click on the button "Check for Updates", it says "Error", then "can't find the Patch. How can I fix?

  Thank you!

  Hello

  Step 1: Check if updates are waiting to install:

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Step 2: Try to install the patch in safe mode with networking:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

  Step 3: See the article on how to solve the problems of the game performance:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Visit this link below to install patches:

  Rise of Nations Update 4

  http://www.Microsoft.com/games/riseofnations/downloads.aspx#patch

  It will be useful.

• HP Photosmart Plus B210a unable to scale print?

  Photosmart Plus AIO, produced no CN216B, don't model no B210a, running Windows 7 x 64.

  Cumulatively, I spent several hours looking for a way to print scale, usually of pages web I'm holding onto one sheet of paper is ridiculous.

  Tempting, I found a retailer site we HP listed specifications for prints of this printer, including the ability to evolve between 1200-12%. However, I have yet to figure out where and how this can be achieved. Is it really impossible to simply 'fit to page '?

  Please, please, will be one of you, experts put me out of my misery once and for all on this issue? Thank you guys.

  For this printer itself, it doesn't have the function prints nationwide. However, there are applications (like Adobe) that can offer this option through their software. But is not included in the drivers for this printer.

• Error: Unable to find DLL entry pointProtctionNotify chnge in mbam

  Tried to launch Malware Anti-Malware and get the following message.
  Can not find the DLL entry pointProtctionNotify chnge in mbam
  Does anyone have a solution?

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  Hello

  1. what operating system is installed on the computer?

  2 have you tried to uninstall and reinstall Malwarebytes?

  I suggest you to uninstall and reinstall Malwarebytes and check the issue.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To reinstall Malwarebytes, follow this link:
  www.Malwarebytes.org

  If this does not help, you can post your request in the forums of Malwarebytes.
  forums. Malwarebytes.org

• Photosmart 6510: How to prevent the printing of a file report after each print job. It wastes a lot of paper!

  Advice would be appreciated!

  You are welcome.

  Open Word and then click on the word or on the file menu and select Preferences.

  Click on print, then clear "Properties of the Document" in the section "Include document."

  Please let me know if this is useful,

  Shlomi

• Photosmart 6510 b211-a does not print black ink.

  My printer has stopped printing in black ink. Tried several black cartridges, cleaned automatically several times, but no printerhead. The other colors work very well. I feel out of the printerhead and clean it manually, but then of course I buy another printer. Any good advice out there?

  I work with XP, and all other functions works well.

  Troubleshooting document here can help solve problems with black ink print do not.  Make sure that the black wind don't is not clogged, as indicated in this document.

• Photosmart 6510: PS 6510 won't print black

  Printer cannot print black ink. I ran the cycle of cleaning several times. The cartridge is new. Gets moderate use with periods where it is not used. The printer is out of warranty. Mention was made in another series of posts on this problem that there may be more specific than just running instructions once again the cleaning cycle.

  Try here.

  http://support.HP.com/us-en/product/HP-Photosmart-6510-e-all-in-one-printer-series---B2/5058334/model/5058335/document/c03760633/

  Let us know.

• Unable to find path error

  I try to build my first approx. edition simple everything seems fine until the last screen «create app» When I click I get this error: unable to find the path: / users/work/Library/Preferences/stagemanager station. BD092818F67280F4B42B04877600987F1 11B594.1/shop Local/dmp / (name of publication here) _2012_9_8_11_25_26 /(publication name.) Can anyone help to understand this error? What's in a Local store? I joined Adobe Cloud. Do I still have to get a serial number unique edition?

  Thank you

  Chuck

  I just wanted to post it here in case anyone else has this same problem who rampage #SharedObjets and dmp files in the directory Library Preferences solved this for me.

  Chuck

• Photosmart 6510: Photosmart 6510

  I recently bought a new laptop and I would like to install my printer Photosmart 6510, but can't find the software anywhere CD. Is someone can you please tell me where I can download the software/driver for it. Thank you

  SickNTired,

  To - Some of the Support pages have been kicking around recently.

  Here's a direct download link:

  HP 6510 V28.8 PS6510_1315-1

  Installation instructions remain the same.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.