HP Photosmart C6280 all-in-one: HP Solution Center does not work. I can print but not scan

Similar Questions

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HP Photosmart 2510 PSC and Windows 7 Solution Center does not

  I have just updated my OS to Vista Business Professional for Windws 7 Ultimate and now device not found when I try to use the center of Soluton HP. My device is a PSC Photosmart 2510 All in One andconnected a network cable. I also tried installing Windows 7 analysis with similar results. Any help would be appreciated gratefully.

  Thanks a lot for your quick response and help.

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

  Hello

  I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

  I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

  "Error - wstub 197370'

  "Fatal error during Installation"

  And then starts to uninstall the entire software package and then request to restart to uninstall complete.

  Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

  All advice is appreciated.

  Best regards, K

  Hi @k_san7,

  Welcome to the HP Support forum.

  I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

  I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

  I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

  Then I would erase the temp directory.

  1. tap folder in the field "search programs and files".

  2 Select all the files in this folder, and then press the delete key to remove.

  Once removed to close all windows and restart the computer.

  When the computer restarts, download and install the latest version of the software and the printer drivers.

  Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• TWAIN plug-ins for the hp Photosmart C6280 all-in-One for Photoshop to Macintosh

  Where can I download the Photoshop (CS4) for Macintosh plugin twain for hp Photosmart C6280 all-in-One, so I can scan from Photoshop?

  The HP software only provid ICA interface support (purchase of Apple's Image Capture) which is the native OS X interface.

  TWAIN interface is no longer available for OS X, which means that you will not be able to scan from Photoshop from Adobe directly because it doesn't support the TWAIN module.

  You have to parse through Capture of Image, then you can open the files analyzed on Photoshop.

  Shlomi

• Photosmart e-all-in-one B110a: HP Solution Center does not open

  This problem began in late December 2015.  HP Solution Center worked fine until then.

  Now the printer works well, but the HP Solution Center does not open, so can not scan to computer or check ink levels.  Tried to uninstall the KB3132372 update [as suggested in this forum] and then everything works.

  However, the update (KB3132372) maintains the re-setup and hit the Centre of HP solutions again.

  Is there something wrong with the KB update that disrupts the HP driver?

  Is that what I can do through a permanent solution? (other than uninstalling KB3132372 immediately prior to scanning)

  Thank you.  Problem solved.  I admit I was a little uncomfortable uninstall security updates - but everything is OK now.

• OfficeJet 7310 all-in-one: HP Solution Center software

  I use "HP solutions Center" scan on my 7310 all-in-in-one software. I have upgraded to Windows 10 & it worked just fine. I just got the latest update of Windows-10 last week. Now, HP Solution Center does not open. When I click on the desktop icon I get anything other than an alert tone - no other indication of what was wrong.

  I uninstalled the driver & it is reinstalled from the HP site - no change.  I have Windows-10 was last updated. I used the diagnostic tests HP & test progs and I know for printer and scanner will not work. The problem seems to be in the service of the HP Solution Center software.

  Also I tried to download the app 'HP Scan & Capture'. It won't download-

  Help, please.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How do I uninstall and hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

  Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello judieKay

  Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

  Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  C410 Photosmart full feature software (Vista)

  10. run the download to reinstall the printer

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• HP Solution Center does not work and I can't download it despite many trials

  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

  Hello todd999

  Try instead these instructions:

  Follow the steps below to rub the software and then reinstall it.
  1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
  2 download the full feature software and drivers
  Photosmart C7250 software (Windows 7)

  3. double-click on the downloaded file to extract the files
  4. once the software install window press Cancel or Exit to close the Setup program
  5. type % temp % in the field run or search programs and files.
  6 find the starting with 7z folder (example: 7zS2356)
  7. right click on 7z file and choose copy
  8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
  9 open the 7z folder
  10 open the Util folder
  11 open the CCC folder
  12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
  13. when the software has been removed, restart your computer
  14. run the Accessories\ System Tools Disk Cleanup
  15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
  I would like to know if you still have the same issues?

• Lenovo T420 3.2.002 Solution Center does not display tile system

  Hello

  I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?

  

  Yes,

  Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.

  Hope this helps.

  See you soon,.

• HP f4210 Solution Center does not open

  I have tried to scan pictures and now cannot start the solution center to do this. I just uninstalled the program and reinstalled. When I try to start the program, nothing happens. No additional processes appear in the Task Manager. I rebooted the computer since the reinstall twice.

  Thank you, Scott

  Hello PinballDr,

  Welcome to the HP Forums!

  I understand that the Solution Center does not open. I will do my best to help you! First of all, I need to know:

  What is your operating system on your computer? Windows.

  I would recommend this utility called the print and scan Docotor. This helps solve printing, scanning and connectivity problems, including Diagnostics: (this information is declared here.)

  • Connectivity: