HP printer C4180, Wireless Connection?

Similar Questions

• Photosmart HP 5510 series: printer for wireless connection software installation CD

  Hi all

  I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=HP+Photosmart+5510+series&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your printer and win 10 OS before you download and install the FULL features software.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Kodak printer lost wireless connection.

  I have an ESP 6150. I installed the software and it woked fine wireless. I reboot my computer and when I go to print, it gives me the error that the printer is not connected to the usb port and will not be printed. It's on my Vista laptop. My other 2 desktops with XP do not have this problem. Where I'm going wrong?

  Repost in this forum for appropriate assistance: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• XP wired network printing problems, wireless connection is OK

  I'm trying to print on a printer to network corp.  He previously worked.  All network printers indicate unable to connect.  This happens when on the wired LAN.  When the wireless LAN Corp., printers are ok and I can print.  I checked the Printer Spooler service and the indications are that it works ok.

  Hello

  Thanks for asking this question to Microsoft Community.

  I would recommend posting your query in the TechNet Forums. The community of IT professionals in the following TechNet forum will be able to help you the best.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• HP2540 all-in-one printer/Scan: wireless connectivity cannot be maintained for printer HP2540

  Printer worked fine using my own home router for 2 years. HP2540 printer - firmware Rev. CP1FN1333AR. OS 8.1 win has recently switched to the service where the ISP of router and printer will not retain any connectivity beyond a single print job. Have 1) reset printer and a router using the low power - several times 2) confirm last HP printer updates are on printer, HP Scan Doctor) 3 performance s/w and connected via USB cable to load new network settings) 4 "uninstalled" and resinstalled on PC and network 5) correctly printed Page of HP Network Config after installation wireless. " Connectivity, then abandoned and doctor Scan indicate "no connected printer" and refers to the USB and wireless install routines, which none has solved the problem.

  All net settings (IP addresses of printer, gateway etc. look OK, SSID matches net name, intensity of the GIS is correct, channel 11 assigned.) Bottom of the Gen section' of the page information HP Net Config says Internet 'Not connected' and a warning "Web Services require the printer in order to have a connection with an Internet connection. I try only to print local PC docs generated however.

  Are passed by the majority of the section of HP at the URL - http://support.hp.com/us-en/document/c02790693 for this printer, which a large part is indicated above. Any suggestions?

  Have you tried using a different channel on the router?

• How to configure a printer wireless connected to Time Capsule?

  I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

  What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

  I hope someone here could help me, please. Thank you!

  I have an Epson printer, so some of my experiences may or may not apply.

  I also have a time Capsule, and my printer and Time Capsule are far apart.

  My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

  When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

• OfficeJet HP 8600 N911a stopped printing via a wireless connection

  There are about 3-4 weeks our 8600 Pro Officejet stopped printing via wireless connection.  I tried to uninstall and reinstall the software on the site of andf also the HP CD.  I ran the software help HP and everytime it tells me to reinstall the software.

  The printer appears on the Wi - Fi and install it correctly every time.  I can print diagnostic pages, status reports to the printer from my computer without isse.

  Pages of test and all other documents will be not print.  He says that the printer is offline.

  I live in the country and there is no wireless connection close to home that he is recovering.

  Nothing has changed from what I can tell.  the unit is out of warranty now and to get help from HP, I would have to pay $40 to get telephone assistance.

  Is there someone out there who can help?

  Thank you.

  Try the steps in this post to restart the spooler: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-photosmart-premium-c310-printer-Windows-7-operating/m-p/1118873/highlight/true#M83583

• Vista will not print works wireless but wired through router

  I have 2 wireless modem ATT DSL wire connected to a firewall server / print wireless Netgear FM114P ProSafe and a router 3Com to increase the number of connections.

  I have a Vista laptop that allows to print everything wired through my 3Com router connected to th Netgear FM114P ProSafe, server print/firewall wireless connected to a HP laserjet 6 p printer, but while Vista connects to wireless internet, it won't print wireless HP connected to the print server.

  I have configured the other portable XP to print wireless using the same ip address but can't get Vista to work.

  Hello

  Your 2 wire wireless mode, is actually a Modem/Router combo.

  I hope that your Prosafe device is connected as a switch with an Access Point.

  If it is connected as a second router you have independent networks that will not work against the second router NAT doble and thustwo.

  Re-set according to the principle here, http://www.ezlan.net/router_AP.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• Can I use my printer manually instead of using the wireless connection?

  Can I use my printer manually instead of using the wireless connection?

  cbg_37 wrote:
  

  It is an OfficeJet Pro 8610.

  Hello

  It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:

  

  Kind regards.

• HP 7510 AIO printer won't connect - Wired workstation, printer wireless

  Hello!  I'm talking about (and verified solution button) too early. The printer still "disappears" from the wired network XP workstation. The only difference as apply the given solution is that disconnect it now happening about every 12 hours, against every two hours.

  Ink notification has the value "only when I print.

  Static IP address is defined for all machines

  HNDU works - when the printer is visible, but hangs at the workstation if the printer is not visible.

  Follow the original comments below;

  Printer wireless HP 7510 goes - 4 station XP wireless network, w / 1 connected PC.

  I think it's fixed now... the problem seems to lie in the module that will inform you immediately if the ink is low (vs only notify me when printing).  If, during the initial installation, the user selects 'immediately', then the printer will disappear randomly. (More on "re-find" later.)

  In addition, it is difficult to change the notification of ink setting, because it doesn't seem to be 'sticky', but will sometimes flip. (I don't understand this yet).  As long as the 'notification of low ink' setting is on "only when printing", life is good.

  If the printer does not disappear, go to the Advanced tab when the printer software/firmware page, instead of the current ink level.  Reset the selection on "tell me the notification of ink" to "only when printing" and then toggle the "autoshut off' from 'NEVER' to '2 hours' and then, finally, a return to '' NEVER. ''  Then, finally, press closed on the Panel.  Printer must be connected again. To test, returned to the Photosmart 7510 app and select "Show estimated ink levels".  The meter will start at 1%, to 41% and then bounce around until it displays the ink level.

  FOR HP TECH: Please consider the "ink level notification" persisted to the registry OR to provide an of-install tool that will completely clean any prior installation of 7510 driver / app in the registry, to install a new can have this setting properly recorded.

  Hope this helps some of you: it's a great printer after its running!

  Jim

• F4580, printer: unable to connect F4580 to wireless network after the upgrade of Virgin Media nowhub

  My printer HP F4580 was connected to my network without wire from Virgin Media Superhub. Then I upgraded to the latest Supehub2 of VM (150 MB/s) but the printer does not now connect. We have 2 Macbooks that connect ok for the SSID of 5 Ghz and a cell phone that connects ok for the SSID of 2.4 Ghz. The printer is WPS enabled and therefore the network. I tried to add the printer to the network using the two WPS push and entering the PIN for Client in the VM Supehub Wireless Manager, but neither work. When I get the F4580 to print the wireless network test report prints a WPS PIN and details for the VM in 2.4 GHz network (auth WPS - PSK, AES/TKIP encryption) sees it. The report includes the SSID for my previous network in the configuration summary. I don't seem to have another way to connect elsewhere WPS push or PIN customer WPS.

  In Manager machine virtual Supehub mode wireless 2.4 GHz network is defined as up to 144 Mbs, but it makes no difference if I put it up to 54 Mbit / s. The Security Mode is set to Auto WP, it makes no difference if I put it to WPA2-PSK (AES).  WPS is activated, and push the WPS button on the Supehub flashes when I use WP Push or enter the PIN code of the customer. In both cases, the I pressed the F4580 wireless button so that the indicator wirelss light flashes then than the VM, push the button flashes. Can anyone help?

  I solved the problem of (re-) install the printer on a Windows PC on the same network, using the CD for the printer. The installation allowed me to select the network, and set up the printer for wireless use.