HP ProBook 650 G1 and biometric on Windows 8.1

Similar Questions

• ProBook 650 G1 and IDT HD Audio driver

  IDT HD Audio driver sp65138 driverpack install properly of SCCM with the task sequence. The speaker in the taskbar icon has a red x and says "no audio device is installed". Device Manager seems ok until you get in the properties for IDT that doesn't say 'no driver installed for this device. If I choose 'update driver' and 'search automatically' driver installs ok. What can we do to make the driver work early?  Operating system is Win 7 SP1 of Ent.

  stno

  I think it's a problem with the pilot script

  Try the same with the driver from the Windows Update Catalog

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=IDT+high+definition+audio+codec+

  http://scug.be/SCCM/category/drivers/

• ProBook 650 G1: Docking Station compatible with HP Probook 650 G1 VBO43AA?

  I have a HP Probook 650 G1 and a dockign VBO43AA station.  The Probook docks and seems to work fine, but I can't find in the list for this Probook compatiblily.  I'm in danger of damaging the Probook using this docking station?

  N ° if you click on and the powers of the laptop and all ports operate so I see no harm to use the dock in the long term.

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• ProBook G1 430: Encrypted hard drive and the corrupt Windows Installation

  My laptop has an encrypted disc using HP drive encryption.  Recently, the Windows installation has become corrupted and I could not repair the installation using floppy disks to install Windows because they cannot access the encrypted drive, nor can they be accessed by other facilities of Windows if I plug in the external drive.  The two methods see the Windows partition as a RAW format.  I guess it's only because the partition is encrypted and has no way to determine the actual format type.

  I searched around to find clues as to how I could get past the encryption, but without success.  The computer is no longer under warranty, so I'm looking for options that will allow me to have access to the data.  The methods I've read all required the computer under warranty.

  I can still go through the encryption after the computer starts, but Windows Setup gives an error and tells me that I must use an installation disk to fix.  I have attached a picture of the screen of the error.

  I'd appreciate any help anyone could provide to solve this problem.

  After much patience and time on the phone with HP, I finally able to return the encrypted Windows installation.  They gave me a copy of the WinPE environment was a software that allows you to decrypt a partition which was encrypted with their software and execute commands Windows on it.  I then ran the repair bootbcd order and I was able to get Windows to start.  To obtain this software, my case should be escalated to tier 2 support.

• HP ProBook 650 G1: HP 2012 W90 - A7E32AA Docking Station

  Hello

  I have recvently had my laptop re-inaged to a 64-bit version of Windows 7 (HP ProBook 650 G1).

  I use it with a HP 2012 W90 - A7E32AA Docking Station, with monitor, keyboard and mouse attached.

  Since the new image, I can't have the mouse or the keybouard to work with the docking station (the monitor does not work).

  The mouse and keyboard work when plugged directly into USB port on the laptop.

  I tried to find a suitable driver for the docking via the HP site and google, but all sources lead me in circles and eventually to nothing so far.

  I hope someone can help? The new driver may still not solve the problem, but it's a process of elimination, unless someone knows of another solution?

  Thanks in advance,

  CJW

  You should not have drivers for the docking... all USB ports on this subject are USB 3.0... Windows 7 requires a USB 3.0 driver. To the person who reimagee your hard drive installing the USB driver 3.0?

  Any part of the dock works? It loads the laptop? I see that the monitor work through the dock docking station is not dead.

  When the laptop is connected you see evidence of it in the Device Manager?

  3 USB driver for Windows 7 64-bit:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405142 & swItemId = ob_161275_1 & swEnvOid = 4060

• HP Pavilion 15-E007TU Windows 7 and Server 2008 windows - drivers please

  Hi team,

  Could you please help me about windows 7 and windows server 2008 drivers for the HP Pavilion 15-E007TU.

  Kind regards

  Sri.

  Hello:

  You can use the W7 64 bit drivers for the 4540 s of HP Probook except audio and card reader drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  This model card reader driver should also work on your.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• ProBook 650 G2: Core i7 6600U processor is only TWO CŒURS - evolution options?

  I recently got a HP Probook 650 G2.

  I 'wanted' the Probook for her one of the last phones built with serial port RS-232 'real' on board.

  I also wanted a quad core processor and would never have dreamed that a modern range high processor would double heart.

  BUT... I was surprised that the Core i7 laptop 6600U my new computer processor is only has TWO CŒURS and the cache 4megs.

  Ugh!

  That's when I remembered that ASSUMES is synonymous of...

  Then, when I went to the site of HP to check and sure enough, all i3, i5, and i7 is all dual-core.

  The only exception was the 6820HQ i7, which is a quad core processor, 8megs of the cache and features of the integrated Intel HD Graphics 530.

  I don't know how much better the Intel HD Graphics 530 on Intel HD Graphics 520 which came with my unit.

  Can a person spend power sipping dual core i7 in a muscle stronger, bending, gulping, four hearts, 8 power + megs of processor cache?

  The CPU is socketed?

  My current motherboard accepts a processor 68xxHQ?

  Should I think with the CPU stronger than using more power than a heatsink / fan different?

  My adapter work?

  The easiest way would be to buy a NEW laptop with the card I want, but it quite late for this.

  This Probook G2 650 was not cheap, and if I go to the boss for more of $, $$$ for another laptop... Well, it wouldn't be nice.

  Your comments, suggestions, opinions, and the flames are all welcome!

  Bryan Smith

  See p. 24 of the manual here.

  Manual

  See the long list of motherboards, each of which includes a processor? You asked if the processor is nested? No, it's not and it's the end of the upgrade quest, unless you traded the motherboard. I guess just the motherboard with i7-6820HQ is going to be well over $ 1000. How about almost $1500?

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=ACF58104B267443785EDA1D549D7EFC2 & Searchin' = partnumber & SearchPN = 844346-601

  Before you throw stones at the 'simple' dual core i7 in your laptop, consider that it carries almost on par with a high range of 4th gen core quad.

  http://cpuboss.com/CPUs/Intel-Core-I7-6600U-vs-Intel-Core-I7-4850HQ

  High modern processors of range, especially in laptops, must also take account of energy consumption. Of course, a Quad Core Skylake will be still more than a beast. Video Intel 530 is a minor improvement on the 520 to the execution units, speed of clock and gflops as shown below:

  HD 520 graphics card	GT2	24	–	1050	403.2
  Graphics HD 530	GT2	24	–	1150	441.6

  The graphics of the Iris is where it begins to be significantly better.

  If find you a way to talk to the boss into something again consider the Zbook G3 series. It can be fitted with up to a Quad-Core Xeon, but even those that are welded on. It seems to be the trend. I think that power management got so delicate that it is difficult to prevent the loss of power by any sort of a processor of half-bridge and everything should be as thin as possible for consumers, even cell phones from the muscle work station.

  Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ProBook 650 G1: 47W HP ProBook G1 650 processor upgrade

  Hello world. Can I upgrade my i3 cpu (4000 m) on HP ProBook 650 G1 (D9S33AV) HM87 chipset with the I7-4700MQ CPU 47W PDT?

  In Bios Version: 01.22 has is added support for the Intel I7-4800QM processor (I think MQ).

  HP ProBook 640 G1, G1 645, 650 G1, and 655 G1 Notebook PC - Maintenance and Service Guide October 1, 2015 I rely for Intel™ Core® i7-4802MQ 2.70 GHz processor (FSB 1600 MHz, 6: 0 - MB L3 cache, quad core, 47 w. I can't find any information on this model of cpu.

  It is possible 47W TDP CPU work on this model?

  Thank you.

  I realize this thread is a few days old, but I thought I would chime. I have a 650 G1 which is originally with an i5 - 4200M and I could upgrade for the i7-4700MQ. Make sure you use a good heat when dough swapping processors and everything will be fine. I use it as it notmally would be used and my time will no more than 60 c using AS5.

• HP Probook 650 G1: G1 Probook 650 screen resolution upgrade

  Hello, I have a laptop HP Probook 650 G1 that is configured with a HD (1366 x 768) display.

  The laptop is also sold with a full HD (1920 x 1080) display.

  I want to upgrade the hd to full-hd screen resolution, and I know how to replace the screen of the laptop (it's easy).

  I find a reseller to original screen has low price for my laptop but I have some doubt about the replacement, Do You think that the full-hd screen works perfectly or there is something that I should check before?

  Hello

  Yes, it will work, but must be a good piece, which is 739998-001, as illustrated on the following Manual:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04030196-2.PDF

  Kind regards.

• ProBook 650 1: Problems with W10 upgrade - Client VPN in my notebook?

  Hello

  I upgraded my laptop to Windows 10 but, like many people, I encountered some problems with the Broadcom 802.11 wi - fi adapter. I read a lot of discussion about it and I decide to yestarday to roll back to Windows 7 in order to do a clean update by ISO and unisntall VPN. I read that Cisco VPN Client is the problem when upgrading to W10... but I'm not sure I have the Cisco Client in my notebook.
  You help me find a software which VPN I have in my book?
  I run Microsoft Fixit and found out that I have:
  Cisco PEAP
  Cisco LEAP
  Cisco EAP-FAST

  Is this software VPN? Or not?

  After having updated Broadcom driver on Windows 10 WiFi worked well, but I still had an error message ' Broadcom 802.11 network adapter wi - fi doesn't work "whenever I turned on the laptop.
  In addition, it was impossible on W10 to open the Broadcom Wireless Tool (Control Panel) software, I always get an error message.

  Should I unistall Cisco software?

  See you soon,.

  Marco

  "Hi @Kreiskybill,

  I'm sorry that was meant to be an internal memo that I'm not trained on commercial products and I was hoping one of my colleagues would help, but I'll try my best to help you.

  For your wireless problem, there are several troubleshooting documents available on the page of product support for your ProBook (http://ow.ly/ADK7301hCLl), that might be useful.  Also, here is the 'HP PC' document - troubleshooting wireless network and the Internet (Windows 10) consumer ( http://ow.ly/pIm0301hEIN ) for reference.

  With regard to programs of Cisco that you listed, @SpiritX on the Microsoft Forums ( http://ow.ly/DAhQ301hCFt ) well answer your question about Cisco programs you listed.  I know that you are not running Windows Vista, but the answer is always valid for you.

  If it helps and you want to thank me, please click the 'Thumbs Up' icon to say thank you.  If you think that I helped to solve your problem, please click the button of "acceptable Solution".  This will allow other users to find what worked for you. »

• HP ProBook 650 G1: upgrade to a backlit keyboard on a laptop HP 650 G1

  Hello

  I recently bought a HP ProBook 650 G1 laptop. This model does not have a backlit keyboard and I would like to upgrade one.

  From what I've read on the internet on this laptop motherboard supports a keyboard backlit (the model is HM87 Intel) and also on a PDF detailed on the HP site describing this model it is said and I quote "Optional backlit keyboard.

  Can someone tell me which keyboard should I buy? Because I can't find online. Can you give me a reference number of the backlit keyboard for this model?

  Or a reference to a compatible model number. I guess maybe a backlit keyboard of a different model of the laptop must be compatible with mine. I found laptops with similar keyboards like mine but backlited (as hp envy 17) but I don't know if they are compatible.

  Sorry for my bad English. I hope that you will help me find a solution.

  Thank you!

  The current store (which still offers this model) does not list an optional backlit keyboard. The backlit keyboard part is not listed in the manual. It's as if they plan to offer that he decided to do not. About all you can do strip up to the motherboard and see if the header is there. Without that, it's a show-stopper. If it is there, the keyboard that would work would be a keyboard of another model of 15 inches and I don't know who it is.

• HP Probook 650 G1 - removable DVD drive?

  Hello

  I'm planning on buying a G1 650 Probook. I thought besides that remove the DVD player (or other it without it) and install an additional HARD drive in place.

  My main question is to know if the DVD drive is removable at all. In the pdf specifications I found online is not so clear the description, at least for me , see below:

  "Removable storage fixed 9." 5 mm SATA optical drive: Blu - ray ROM DVD +/-RW SuperMulti DL; DVD +/-RW SuperMulti double layer; DVD-ROM ".

  So is removable or fixed?

  In addition, if it can be removed, is it worth all the different configurations of HW on this model, or only to a small number?

  Thank you very much in advance. Can't wait to get the new laptop

  See you soon

  Juan

  Sorry to jump in.

  http://www.eBay.com/ITM/new-2nd-SATA-hard-drive-SSD-HDD-caddy-for-HP-ProBook-650-G1-645-G1-640-G1-/281226439098?PT=US_Drive_Bay_Caddies&hash=item417a66e9ba

  Under $25.

  REO

• ProBook 4710 s & ADI Soundmax driver Windows 7 64 bit

  I recently installed a new hard drive in my HP Probook s 4710 and installed a new version of Windows 7 Professional 64 bit.

  I'm unable to install the audio driver.  I downloaded the sound driver ADI SoundMax AD1984A for Microsoft Windows 7 sp45115.exe.

  However, it will not be installed.  I get the error message is "the audio driver does not support your hardware.

  In Device Manager, the driver is Microsoft High Definition Audio Driver 6.1.7600.16385.

  Under control panel - sound playback device is Digital Audio HDMI, high definition Audio Device, not connected.  I'm unable to click set up or as a default value

  When I place the mouse on the icon of audio bottom left it says that no speakers or headphones are connected.

  Sorry, that didn't work.

  I have the Eltebook from HP 6930p with the same audio chip.

  You will see that it listed as one of the cell phones taken in charge by the same audio driver.

  I have some questions for you to see if we can get the proper functioning.

  1. When you installed first windows 7 without adding any driver, did you have audio?

  I did when I installed W7. This is the version without SP1. So, I'd be a little surprised that your laptop uses the same audio chip like mine, than installed W7 without the audio work.

  2. If you have audio after installing W7, you install the following drivers in the generally recommended installation order and restart after each individual installation of the following drivers?

  This order being:

  First of all, - Utility Intel Chipset Installation

  Second, - graphics

  Third, - Audio

  If you answered no to this question, which might be the cause of the problem.

  In this case, my recommendation would be to reinstall W7 and try again using the method described above.

• How to connect to a windows OS to IOS and run a windows program?

  Hi all

  I would like to know if possible to run a windows program (i.e. DIR or WINVER) on a machine windows on the network via a computer of IOS command line is connected to the same network. Basically, I have 2 computers in a network, a MAC OS and the other is WINDOWS. MAC OS I want to run a command of windows inside the windows machine.

  For example, via the terminal in my mac I want to connect on the windows machine, and run any windows program I have in the windows machine.

  I know it's possible to do on linux via the command line WMI Windows Management Instrumentation command-line.

  Do we have something similar to the WMI for IOS command line?

  Rodrigo.

  I'm confused. You mention a PC (Windows OS), Mac OS (Apple computer) and iOS (Apple iPod touch, iPhone and iPad operating system).

  You can get apps that allows a computer iOS to use a computer mac or Windows computer such as LogMeIn or GoToMyPC.

  Yu can also get the app that allows you to use your Mac to access a PC.