HP Probook 650 G1 - removable DVD drive?

Similar Questions

• Just went through complete HHD failure want to reintstall backup removable DVD drive

  My system did not come with installation disk. Operating system has been installed at the factory "XP home" only return up to retore had same HHD. who died. Got the XP reinstalled by hidden an installation disc. I have soft ware now who will save the HHD, but if he dies again I need a bootable cd/dvd that will copy the backup to the new HARD drive. Is the way to do it?

  Hello

  You can contact the manufacturer of the computer for the recovery disc.
  You can also check out the article below:

  How to create a boot disk for an NTFS or FAT partition in Windows XP
  http://support.Microsoft.com/kb/305595

  I hope this helps.

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• How to remove the drive of DVD of Tecra M3

  Have an old Tecra M3 which works, but had a defective CPU fan.

  Have managed to get and replace the fan, I came across a problem annoying when disassembly of the case.
  I could not for the life of get out me the DVD drive. According to everything I read the disc should come out just, but he wouldn't.

  I couldn't find anything (like a button or a screw) that it locked in.

  Anyone able to point me in the right direction (today more interest than anything else)?

  See you soon...
  KeV

  Hello

  The ODD on Tecra M3 is fixed with a screw on the lower side of the laptop. You must remove this screw first before you can remove the ODD.

  Underside, there is a latch to remove the ODD. To remove first the screw next to the latch, then slide the battery bay latch, then you are able to remove the ODD.

  Check this box!

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Equium L20-264 - how to remove the DVD drive?

  Hello

  I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.

  There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.

  Any help would be appreciated

  Hello

  Please, check here

  http://www.irisvista.com/tech/

  It can help you

• Satellite A50-108: how to remove the CD/DVD drive?

  I want to update my CD - RW drive for a dvd burner, but can't get the old drive of the laptop.
  I removed the screw on the underside of the laptop, but it won't come out.

  Do we know if there is any other screws received a way to remove the drive of any help greatly.

  Post edited by: na206

  Hello

  It's very strange that you can not remove the optical drive as DVD - ROM drive Assembly is secured with just a screw on the underside. If the screw is removed, you just pull all of the DVD-ROM drive.

  There is no other screws.

• Z500 windows touch 8 - cannot remove the CD/DVD drive

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  Jocks123 wrote:

  I'm pulling the reader of CD/DVD the Z500, but even if I removed the screws now in place (and Yes, I mean ALL) does not move. I need to remove the disk to access the motherboard to replace my fan and he will just walk out. What is the problem? I'd appreciate any help or advice.

  First make sure that there is no disc in the dvd/cd drive. Then remove the single screw shown in step 2 in the image. To remove the drive, you can either push with a screwdriver as shown in step 2 (if iti is you push hard with the screwdriver and help pulling the device at the same time) or you can gently pull the optical unit, as shown in step 3.

  

• CD/DVD driver removed from the registry in XP Pro with Service Pack 3

  I think that my CD/DVD driver has been removed in the registry in XP Pro with SP3. It does not appear in the system, or Device Manager. I tried solutions provided Microsoft Fix - it and have had no success. Does anyone have a solution to this problem? If nothing else, what is and how can I attempt a remote restore? The CD/DVD drive has no access to the system path, so I can't use my recovery disk. Thank you!!

  You have posted a question of Windows XP to a group of win7?

  Assuming that it is a desktop computer turn off / shut off the current, open your case and verify / reconnect the cables to the cd

  And at the end of the day, maybe your cd/dvd has not, I suppose that any other err devices listed in Device Manager?

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Button to remove the CD/DVD drive is grayed out... How to remove it?

  It is not connected, it is configured for the client machine, the button Delete is greyed/dimmed...

  All the google talk * adding * does not remove...

  I have to close the virtual machine, what?

  How can I get rid of the cd/dvd drive?

  Thank you, Tom

  Yes, I ran into this problem yesterday. I had to remove because it was stuck to open up the ISO. I stop the virtual machine and I could remove it.

• Satellite A660 - do not find external DVD drive

  Hey guys. Newbie displaying in total despair of and needing help! I posted in other forums without success. I bought a Samsung SH-D162D DVD drive in a USB enclosure to connect to my Satellite A660 via USB.

  I can't get Windows 7 to find! When I plug in the USB cable, the ball comes up to say that it has been installed (sometimes), I can see it on for about 1 or 2 minutes then he falls. It is not listed in my hardware or anything. Its not found in disk management or my devices, so it is not a case to change the drive letter - I can't find the drive to change. I also tried to find upper and lower settings in regedit. Could not find them so couldn't remove them as suggested in other posts of this nature.

  It is set to master, the IDE connector and power connectors are very good. Its got to be a cause of problem of Windows 7 it comes very briefly. In the minute or 2 sound, I can't do anything with it. It crashes right although it will open and close. I've google it and can't find anything. Mainly of registry issues, but they did not help.

  Ive also connected to another laptop with XP and had no problems so I know the DVD Rom works very well and all the cables are ok. Ive tried all 4 USB ports on my laptop and also disabled all the parameters of energy. All with no luck. And I also all Windows 7 update.

  This is exactly what happens to the power out of the Cabinet.

  1. I connect the USB cord then turn on the enclosure.
  2 - I quickly click Start, and I can see the DVD Rom E player beside my computer laptop dvd rom.
  3 - the green bar above starts to fill to the top, from left to right and gets to half way then suddenly disappears icon of DVD Rom and makes the green bar.
  4. He then flashes up in computers laptops DVD Rom icon with a player of Local E drive, but only for a fraction of a second.
  5. sometimes a balloon comes up saying peripheral installation, then the installed device successfully... but not every time.

  And that's all. I'm at a total loss and the cant work, so any help is really appreciated!

  Hi Smee,

  So if you have already connected the external hard drive on another computer, and it worked correctly, it seems to be a driver or compatibility between your external DVD drive problem and and your Satellite A660

  It will be connected to the port USB then you tried to remove all the USB ports on the Device Manager? After that, you must restart your computer and the USB ports will be recognized automatically from the Device Manager. In addition, I would also try updating the chipset driver. New version, which you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you also tested other devices on your A660 if they work properly?

• Re: DVD drive hardware error - what is gravity?

  Hello

  I have a Toshiba Satellite Pro A300-1PK, and even if I took good care of her, the DVD player seems to be broken.
  Move the head with the drive laser top correctly, but the DVD does not seem to turn.

  The DVD player is to be entirely changed, so practically irreparable, or is something that even if I could fix it in 2 minutes, knowing where to get them?

  any useful comment is greatly appreciated. THX

  Hello

  Yes, you must replace the entire drive Dvd. how long it takes lets you replace the drive Dvd is according to the model of laptop. For my A500, in order to remove and replace the CD/DVD drive I have to disassemble the whole laptop.

  You can find something useful here:

  http://www.irisvista.com/tech/