HP Proliant NAS Software bluescreen

Similar Questions

• Slow drive QNAP NAS

  Hello

  I mounted the SIN of QNAP (TS - 451, 4 x 3 TB WD RED, RAID-5) on network Giga ethernet (using unmanned giga ethernet switch hubs). However, the speed of file transfer is slow and he cuts every time.

  I use IMAC 27 "with the latest MAC updates.

  I tried to mount the drive smb/afs and its still slow in both types of mounting.

  Any suggestion please?

  Thank you.

  OS X does not support the NAS technology. You must contact the NAS developers for support on their product. The first thing I would recommend you do well that must ensure the NAS software that you have installed is designed to work with the version of Mac OS X installed. If not then check with the developers to see if they have updates.

  This means, at any time your account to update or upgrade the operating system on your computer, check with the NAS developers to ensure that they support this update before the update of the OS.

• NAS work with FCPX and external drives?

  I use a Mac Pro 2013, 3.7 Ghz Quad Core, 16 mHz Ram with 512 GB of internal storage, AMD over-pants D500. My employer also purchased a Synology DS415 + as my storage with 12 TB of HARD drive space.

  Now, I try to install FCPX and Motion 5 as my zero external because the machine has only 512 GB internal. But the problems lies in that the Synology's NAS still FCPX he sees not as my drive to zero. The NAS is connected to the network and I can access it via the NAS software but it does not appear on my desktop as an external drive even if I directly connected via USB 3.0 (A - A). I read on the website that if I connect it to the Mac via USB 3.0, it will appear as an external drive on my desk, but that does not happen. USB port on both units are USB - A (male?)

  And so my question: someone has their 2013 Pro Mac connected to a NAS for mounting on FCPX? And how do I set up mine to do what I hope? I searched the web HI & lo, nothing helped, and I have a feeling that I won't like the answer.

  Thank you in advance. Any help will be greatly appreciated.

  External drives no longer appear on the default desktop.

  Finder > Preferences, select the option to display on the desktop under the general tab.

  I do not know if that will solve your problem in FCP X, but it could explain why he is not on the desktop.

  I think that FCPX will be unhappy if you try to use a disk on the network, he really needs a fast connection, USB3 should work, but I think that ethernet can be slow because it is a shared environment.

• Update on failure and storage ready Nas

  Hello everyone... !!!

  I already have my Nas 3 year nows... I use it on my work as surveyor enginier and today I got a problem...! After a reboot it tells me a message that it could not get flash memory... !!!

  I already had all my documents within my job in the raid 1.0... !!! I did the thing of tool USB recovery but nothing happends... !!!

  My first question what I can do to make it work again?

  If I reset the NaS software, he will understand that my HD are in the raid 1.0? Or this delete all my files? Is it possible to make a backup now?

  I don't know what else to do... !!! the worst thing is that I have all my jobs in there and I can't work without it... !!!

  O.K. You had 6.1.4 on this unit and tried to use 6.1.5 to fix it using Recovery Boot USB.

  I had a look on the remote system and manually updated to 6.5.2 and it came in fine. Also then update it to 6.5.2 6.6.0 with no problems.

• Move the large Itunes library to QNAP nas

  I have a very large iTunes library (28000 + tracks) and move it to a QNAP TS119 nas (disc), so as to add titles to my library my SONOS system can access without the need for my Mac to be marketed.

  My question, where should I put on the NAS and what is the best way to transfer files?

  When the files are on the NAS I just point itunes to that folder on the NAS Server?

  And finally if all goes wrong I can simply point itines in the original file on the Mac.

  I have other forms of return such as external hard drives, a time machine WD as well as a sharecentre from D-Link (2 Bay) which I am also faced with.

  Thank you very much.

  Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.

  Or you can move only the media: 12 iTunes for Mac: change where are stored the iTunes files - http://support.apple.com/kb/PH19507

  With a NAS you live with some risk. iTunes and NAS not always play well together and there are regular positions here where file locations is stripped completely with use NAS (I think this has something to do with the NAS software).  During an iTunes update can cause complete failure of the library when on a NAS to what NAS manufacturers publish a software update.  If you use the NAS I suggest you use a hard drive regularly to store your library and use the NAS for backup.  If you use the NAS, I would put the entire library on it, not only the multimedia files.

• NAO estou access entrar no faceboock

  This page da nao esta available web

  Google Chrome O nao pode carregar a page www.facebook.com thanks muito porque para stakeholders. Site esta em well or sua conexao com an Internet nao esta running.
  Veja some contact us:

  • Recarregue this page da web but slow.
  • Verifique sua conexao com an Internet. Reset any roteador, of modem or another device rede as voce is using.
  • Adicione o Google Chrome como um programa allowed seu configuracoes nas software of firewall or antivirus. SE o programa ja for allowed, exclude Bivvy-lo da lista programs allowed e adiciona-lo again.
  • SE usar um servidor proxy, verifique suas configuracoes proxy or between em let com administrator of rede para verificar o be o servidor proxy is running. SE você acredita than não deve usar um servidor proxy, adjusts as proxy configuracoes: Va para o menu do Google Chrome > Configuracoes > show configuracoes avancadas... > Alterar proxy... configuracoes > Configuracoes da LAN e desmarque a Seleção caixa "Usar um servidor proxy para a rede local."
  ERRO 7 (net::ERR_TIMED_OUT): O tempo limit da operacao faith achieved. E diz quando tento entrar o

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• ProLiant DL320e with Windows Server 2012 Bluescreen

  Hello

  I installed Windows Server R2 with smart supply a Proliant DL320e Server 2012 R2 and it bluescreens much. The blue screen message is a pretty no description "KERNEL_SECURITY_CHECK_FAILURE".

  I installed a second Proliant DL320e server and it shows the same behavior, so I conclude that this isn't a defective hardware.
  
  I found some knowledge which mentions screens blue and with the driver for Smart Array
  http://h20628.www2.HP.com/km-ext/content-webapp/document?docid=emr_na-c03793656 & DTD = default & local = d...
  But the update and version numbers do not match.

  Drivers, software and firmware for the HP DL320e Gen8 ProLinat Server Page did not all downloads for my OS-, but it displays a warning that it is experiencing problems.

  I tried to fill in the HP Support Assistant, but I got an email in response, telling me that they are currently unable to help with e-Mail support.

  The servers are offline on a clients site in a restricted environment so that they lack updates online.
  
  During this time, I downloaded the SPP Service Pack for Windows Server
  FTP://FTP.HP.com/pub/softlib2/software1/CD-generic/p652182553/v84427/SPPMDSLWIN2013090.2013_0830.7.i... and today, I'll try if it corrects the blue screens.
  
  Does anyone have pointers?

  Take care

  Martin

  Thank you, I have not found this forum. If an admin could move it which would be best.

  Just in case anyone else has this problem is this question:

  I contacted HP by telephone support and the solution is:

  Do not use smart supply when you configure your server, it is not supported and it will be randomly bluescreen with Windows Server R2 2012. You must install windows directly, so take your storage driver and copy it to a usb key and load the driver during the installation of windows. In my case I needed to use the mass storage drivers for Windows Server 2008 R2 from http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5293151 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_9b5424c852a54e49b501e280e5%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Take care

  Martin

• We need to get the new software we ix2-200 NAS new computers-Win 7 64 bit, old XP32 bit

  Hi everyone;

  Our company's new computers and they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.

  Hello Raym0nd69,

  There isn't any software owner to access the ix2.

  They run out of network/Internet protocols.

  as long as you have the IP address you can access the user interface, and as long as you map the actions you should be able to access the data.

• 2014.02 - Bluescreen Windows 8.1 vision acquisition software (imaq vision acquisition express vi in labview)

  Hello

  I have big problems to install the Acquisition of Vision software to Windows (64-bit) with installed LabView 2013 SP1 (32-bit) 8.1. He finds himself in a blue screen after the computer is restarted.

  My main problem was that I only had 'Vision Acquisition' express vi LabView 2013 SP1 Windows 8.1. So I installed this VAS2014.02 (http://www.ni.com/download/ni-vision-acquisition-software-2014.02/4584/en/) and it solved the problem, the vi in labview and works fine until I restart my pc. Because after the restart of the blue screen is coming. After several times of blue screens it came Windows 8.1 recovery menu. By selecting "Help for starting" or something similar (I have German OS) in "Advanced Boot Options", the system could be recovered with relatively little loss of data (work today has been lost, only yesterday the files were there). So I repeated the installation of VAS2014.02 and once again the same: blue screen after restarting Windows 8.1.

  It is not compatible with it?

  (but it is: NEITHER Vision Acquisition Software 2014.02 - Windows 8 32-bits/8 64-bit/7 64-bit/7 32 - bit / Vista / XP 32-bit/Server 2008/Server 2003 R2 32-bit)

  What can I do to use the Vision Acquisition express vi into labView 2013 Sp1 Windows 8.1? I had lost the good part of the time today to operate without success. Thank you for your suggestions in tips!

  Michael

  Hi Michael,

  I'm sorry for the problems you are faced with customer Service. There is a known issue with some software components which ARE pulled inward, which will cause the BSOD you see. The problem is examined formally at the moment, but in the meantime, the simplest solution is to remove the stand from the IO IMAQ for R series cards (1483, 1473R, 8237R, 825xR) as described here: http://forums.ni.com/t5/Machine-Vision/After-upgrade-to-NI-Vision-Acquisition-Feb-2014-Windows-does-.... If you require the use of these cards, there are other workaround solutions for which you can contact OR support that is formally addressed.

  Kind regards

  Joseph

• Openfiler as NAS for ESXi shows the performance difference between software RAID6 and RAID10.

  I had some performance issues with a new ESXi server with virtual machines hosted on a table of 6 software RAID (12 units of optical fiber). Here's what it looked like:

  12 multi-plate (RAID 6) -fiber channel- Openfiler.

  ---

  NFS - VMWare ESXi

  Since I had a spare CF array I decided to fix to the Openfiler box and try to RAID 10 in software. Different performances has been staggering. I did a lot of steps, but I test the startup time of a computer virtual stored on each table of FreeBSD.

  RAID 6 59 seconds

  RAID 10 45 seconds

  Now waiting for MBR of FreeBSD for 5 seconds and the boot loader expects 10, so there were at least 15 seconds of downtime in each case. The strange thing is that accessing directly the matrix RAID 6 via FTP provided good performance. I was able to saturate a 100Mbit link and the Openfiler Server showed almost no load. But with the VM on the RAID 6 array, the load on the Openfiler area would jump to 4 +. I hope it helps someone.

  Jason M.

  It's better.  What system and mount underlying file options are used?

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• connection to the interrupted NAS

  At the office, those who work with the Mac (El Capitan) keep having this problem when they try to access and work with files that are located on the NAS.

  First I thought it's because more people are trying to access the same file, but I'm assured this isn't the case.

  The network connection for the file «...» "is interrupted, or the file is modified by a different process.

  

  Would you be able to point me to the right direction?

  McCloud94,

  Apple has never supported third party NAS devices. In short the NAS ONLY supported by Apple technology is their own Time Capsule devices.

  My suggestion is to contact the developers of the SIN, however first check the version of Mac OS X installed is supported by the NAS server and then check the Macs that are running compatible versions of Mac OS X for the SIN application, you use. If you still have problems, contact the NAS developers to fix their software.

• First Time Machine to NAS backup freezes at the same point, Console polluted by the same mistakes.

  I just configured my LaCie 5big Network2 act as a time Machine, but it is not back up correctly. When I run it always freezes at 14.70GB/237.71GB, even after deleting the backup and starting up again. I don't know if it of related or not, but the Console is littered with the same error messages (even if Time Machine is not running):

  

  If I stop the backup and restart it, it will get stuck after 7KB. If I delete the backup and starting a new one, it will get stuck at 14,70 Go again. This could be the cause? The NAS is configured correctly and firmware is up to date, disks are operational and functioning perfectly.

  My system is a 2015 retina MBP 15 "16GB / 500GB.

  Time Machine is a LaCie 5big Network2.

  LaCie can support this, but isn't Apple. the NAS can have its own propreitary features or a network can introduce the software is not designed for questions.

  If you want to use a NAS for backup, you can consider Carbon Copy Cloner as alternative

  For more information on the use of a 3rd party with network drive time machine see these article

  http://pondini.org/TM/2.html

  https://www.Google.com/?client=Safari#q=time+machine+over+network+drive

• 40 D 345 NAS drive connection

  I recently brought a 40 DB 345 D tv and was really please when I installed it to find that it automatically connected to my NAS drive as soon as I have the tv connected to my wireless network.

  Everything was going fine until the other day when I connected a USB flash drive to the tv to watch a movie.

  Now despite the removal of the USB drive to the TV does see the NAS drive?
  When I select the media icon, the screen displays "no device connected" or something similar.
  I have reset the reinstalked tv tv channels etc. I removed the WiFi network and reconnected.

  Anyone else had a problem similar or got any ideas how to fix?

  It worked the first day of the box and the only thing I can think of to stop the wss work, inserting a USB device, but why woukd TV not go back to its original configuration after the USB has been removed?

  Any help greatly received as the streaming media from the NAS is a real asset.
  Is there a reset button anywhere on the tv completely reset to factory settings?

  The TV must be configured as Media Renderer
  This feature allows reading/sharing of files stored in a compatible MEDIA smartphone, tablet pc or laptop or NAS on the TV. Install software on your device and read the instructions in the Software Division for more information.
  In the settings of the TV put MEDIA Renderer option highlighted and press left or right to enable or disable this feature.

• Satellite A660-1GC - Bluescreen when HDMI is connected

  I have a month old Toshiba Satellite A660 it was installed with OEM Windows 7 Home Premium, I have now installed Windows 7 Ultimate 64-bit (and not an upgrade) I ' ´ve installed and updated all the drivers.

  But when I put in an HDMI cable on my flat screen LG TV it starts to Flash on the screen a couple of times and then it goes black and back to zero, and if I let the cable inside sit go to bluescreen after loading Windows. Can someone help me please?

  Windows 7 Ultimate 64 bit
  Intel Core I5 480M 2, 67GhZ
  6 GB of DDR3 Ram
  540 GB HARD DRIVE
  GeForce GT 330M

  Raven

  Hello

  Have you noticed the same behavior with pre-installed Windows 7 Home Premium at Toshiba?

  I think it s a driver or software issue, so it would be interesting to know if everything worked with original settings or not.

  Have you installed most recent display of the official website of Toshiba driver?
  http://EU.computers.Toshiba-Europe.com/